29/EUDC-VI/LESA T.G./2023-24

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 11 Mtr long

11/0.4KV 250 KVA T/F

LT Cable 3.5x240 sqmm/1x400/630 sqmm

11 KV XLPE Cable 3.0x70 sqmm

11 KV XLPE cable jointing kit O/D/S/T type

ACSR Dog Conductor.

11 KV Polymer Pin insulator

11 KV Disc Insulator 45 KN

11 KV Disc Fitting

MS Earthing rod

Fabrication erection of substation type double pole on ST pole 11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Laying of LT Cable 3.5x240/1x400 sqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Construction of T/F plinth of size 2x2x1.5 mtr. With Ist class bricks and masonary work in the ratio 1:4 cement & sand coarse, filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor.

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Pipe type earthing of transformer with 20 mtr deep borring and providing Jindal make GI pipe "B" Class 1” dia (20 mtr GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI pipe cap. All material shall be supplied by the contractor.

Laying Stringing & Sagging of 3 phase 4 wire 11 KV line by ACSR weasel conductor with the help of necessary Clamp & Insulator as per RESPO Specification and direction on E/I. ACSR weasel conductor shall be supplied by the Department.

Laying of 11 KV XLPE Cable 3x70 Sqmm by Mannual method. Only cable shall be supplied by the department. All Civil Material, T & P arranged by contractor.

Hoisting of cable on Pole by 2.5mm GI pipe 6" dia,cable clamp with nut bolts.

High pressure testing of 11 KV 3x70 sqmm XLPE along with arrangement of High Pressure equipment.

Supply and fixing of clamps.

Copper L-Piece

Alu Lug 70/240/400 sqmm

X-arm Clamp

MS Angle 65x65x6mm.

GI Pipe 75 mm Dia

Nut & bols off size

Danger Board With Clamp

Cable holding Clamp

Pipe Holding Clamp

Clamp for Angle

Sundry Item like AL Lugs PVC

Dismantling of old damage 11 KV XLPE HT O/H line 95 Meter.

PVC Cable 1x50 Sqmm

LT Protection box

Fixing and Installation of 11 KV XLPE cable jointing kit O/D type. (Only jointing kit O/D/St provide by the department)

Provinding, fabrication and fixing of DO Fuse Set.

Provinding and fixing of 11 TPMO Set with Plolymer insulator.

Grouting of pole with the help of Cement, Course sand and brick ballast.

Painting of pole by two coat of red oxide and two of Al. Enamel paint. (All material arranged by the contractor)

Installation & commissioning of 11/0.4 KV 250 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

DEEPAK ENGINEERING

RAJ ENTERPRISES