Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.1 LAccepted-AOC | 1 | Accepted-AOC Accepted | |
| 2 | 2₹2.2 L+₹8,410.40 (4.01%)Rejected-AOC WARD NO 2 GANDHI NAGAR NEAR ADARSH SCHOOL CHARKHI DADRI 127306 | CHARKHI DADRI | CHARKHI DADRI | HARYANA | 127306 | 2 | Rejected-AOC Rejected |
Tender Value
₹2 L
EMD Value
₹4,000
Closing Date
11 Jul 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Provincial Division, PWD B and R Br., Charkhi Dadri
Annual repair to Govt. Polytechnic at Loharu
2022_HRY_227957_1
AR to Govt. Polytechnic at Loharu
Open Tender
Civil Works - Buildings
Works
30 days
Charkhi Dadri
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹4,000
Yes
8 Aug 2022
29 Jun 2022
12 Jul 2022
29 Jun 2022
11 Jul 2022
29 Jun 2022
Amount
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.pre. laminated particle board both side laminated (HSR 12.158.2)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :Powder coated aluminium minimun thickness poweder coating 50 micron (HSR 12.157.1.2)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortat (HSR 5.7.4)
Brick work with common burnt clay machine moulded perforated non-modular bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). (HSR 7.43.2)above plinth level upto floor IV level
12 mm cement plaster of mix : 1:6 (1 cement 6 fine sand)( HSR 11.5.4)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: fixing with adjustable lugs wth split end tail to each jumb (HSR 13.3.2.1)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181)
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.(HSR 30.17)
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work( two or more cot aplied 1.65 litre/sqm 10 sqm on e xiting cement paint surface (HSR 30.37.1)
Renewing glass panes and refixing existing wooden fillets: Float glass panes of nominal thickness 5mm (HSR 30.56.2)(weight not less than 12.5 kg/sqm
Omkar Contractor
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .