CERTAIN REPAIR TO BLDGS OF 661 ARMY AVN R AND O 4 GUARDS CWE OFFICE GE (WEST) JRC AGE E/M (WEST) 4011 FIELD HOSPITAL VAJRA CANTEEN OFFR MESS OF 27 AD 661 ARMY AVN AND PERIODICAL SERVICES TO BLDGS PERTAIN TO B1 AREA OF AGE B/R-II UNDER GE (WEST)

Amount

M&L preparation of old decorated surface of wall and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old decorated surface of wall applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old decorated surface of wall applying one coat of colour wash complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old decorated surface of wall applying one coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old decorated surface of wall and applying two coat of oil emulsion distemper (white) complete all as specified as directed by Engr-in-Charge

M&L preparation of old decorated surface of ceiling applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of old steel surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint complete all as specified

M & L for Preparation of old wood and wood based surfaces of any description over 10CM width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down cement plaster on brick wall upto any height(max of triple storey) including raking out joints hacking for key srcubbing down with water complete all as specified and as directed

M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace is to be finished even and smooth with out using extra cement complete all as specified and directed

M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace finished even and smooth with out using extra cement complete all as specified and directed

M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Grubbing up bushes or tree trunk of grith n exc 10cm including taking/digging out roots and making good disturbed portion of wall with PCC 1:3:6 type C-1 and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed.

M & L for Preparation of old stone/concrete surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint (in alternate colours if required as per site) complete all as specified

M&L for Preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of wall putty complete all as specified and directed.

M&L for preparing of new plaster surfaces of wall and applying 2 coat of cement based paint over a coat of cement primer

M&L for three coats of white wash on newly plastered surfaces of ceiling including prepration of surfaces complete all as specified and directed.

M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high complete one set at one place with synthetic enamel paint complete all as specified and directed.

Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.

Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.

Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

Providing and applying two coats of cement based paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall and ceiling board in any thickness including cover fillets

S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runner 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dia GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purlin/roof with alignment clip incl providing provn for light fixtures of any size complete

Supply and fixing PVC wall lining/ panelling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame and plugging to brick wall with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing including necessary cutting for electrical fittings as per site requirment complete all as specified and as directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Roughning for old concrete surface/floor by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.

M&L for PCC 1:2:4 type B-1 as in roof padding average 50mm thick to be bend on existing slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified

M&L for laying APP based polymeric membrane minimum weighing 3.60 kg/sqm and min 3mm thick reinfirced with polyster non wore fabric (wt not less than 150gms/sqm) land on primed surface by forced application

M&L 40mm thick brick tiles laid on cement mortar bed 1:6 ,15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per item No 34 but except tiles.

M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premises complete all as specified and directed

M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed

All as per ser item No 39 above but in skirting and dado including rendering/screeding in cement mortar 1:4, 10mm thick

M&L vitrified ceramic tiles 10mm thick (square/rectangular)polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match over & including 15mm thick screen bed in cement mortar (1:6) complete all as specified and directed

All as per ser item No 41 above but in skirting and dado including rendering/screeding in cement mortar1:4 , 10mm thick

M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over & including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed

M&L for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick screed bed in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.

Dismantling plain or corrugated asbestos /translucent sheet in roof covering incl ridges

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

S&F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L type or J type hook bolts complete all as specified.

M&L PCC 1:2:4 Type B1 (using 20 mm graded aggregate as ) as in roof curves, mud stops rounded or chamfered on edge complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc.

M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks.

M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks but except bricks.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore

S&F 15mm dia bore GI tubing, jointing and testing medium grade with all fittings such as bends, elbows sockets, reducers etc and fixed to wall, ceiling or laid in floor with fittings, the rate also included for cutting through walls floors etc.

S&F 20mm dia bore GI tubing, jointing and testing medium grade with all fittings such as bends, elbows sockets, reducers etc and fixed to wall, ceiling or laid in floor with fittings, the rate also included for cutting through walls floors etc.

Refixing only 15mm dia bore GI tubing, jointing and testing fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

Refixing only 20mm dia bore GI tubing, jointing and testing and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

S&F in repairs 15mm dia bore stop cock concealed type cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Supply & fix only water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed

S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)

S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied

S&F stainless steel soap dish complete all as specified

S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.

Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 74 above but exc 1.5 sqm but ont exc 4 Sqm each

Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.

Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

S&F 35mm thick second class hard wood plain framed paneled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated 35mm thick.

S&F second class hard wood locally fabricated glazed and skelton shutter 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item.

Ditto as per description of item No 82 above but with glazed shutter

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F any colour, aluminum door shutters powder coated , aluminium section weighing not less than 1.00 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F any colour, aluminum window and ventilator shutters, powder coated side hung type with sash bars, aluminium section weighingnot less than 1.00 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane

Supply & fix tinted glass ordinary quality 5.5mm thick n, exc 0.5 sqm in each pane

S&F 100mm butt hinges, stainless steel medium weight cold roled and fixed

S & F 150 mm aluminium handles, cast type anodised

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor.

S&F aluminium anodised barrel tower bolt of extruded section of 200mm size

S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.

S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.

Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

Dismantling Timber scantling 40 sqcm over in section in any description complete all as specified.

S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w(Gde-E-250) quality A complete all as specified an directed

M&L for cement concrete 1:3:6 Type C-2 as in foundations filling and mass concrete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified.

S & F 110 mm PVC (SWR) bends any radius provided with access door.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed.

M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) high pressure PTMT float valve 20mm with epoxy coat aluminum rod & plastic ball complete hoisted and fixed in position including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

All as per ser item No 110 above but 1000 lter capacity complete all as specified and as directed

S&F in repair vitreous china wash hand basin oval type white size not less than 550 mm x 400 mm fixed on and including cast iron cantilever brackets, 32 mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed Note: pillar tap shall be measured as supply only under respective items

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed

S&F in repairs 15 mm dia bore angle valves two way cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed

SARASWATI CONSTRUCTION CO

G S TRADERS

B.P CONSTRUCTION CO

FRIENDS ENGINEERS