Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.1 L+₹36,024.80 (1.73%)Rejected-AOC 7TH MILE P O NONGLYER UPPER SHILLONG 793002 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793002 | L2 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
26 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(AF) SHILLONG
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
CA NO. GE (I) (AF)/SHL/ OF 2022-23 REPAIR TO DRAINS, SEWAGE LINES, AND CLEANING OF SEPTIC TANKS, MANHOLES, SEWAGE LINES ETC., AT HQ EAC(U), AF UNDER GE (I) (AF) SHILLONG
2022_MES_561045_2
8046/22/SHL/2022/23
Open Tender
Civil Works
Item Rate
300 days
SHILLONG
For Enlisted Contractors Class E Category a ii and for unenlisted contractors meeting enlistment criteria for required Class and Category
7 documents required · 7 mandatory
₹500
GE(I)(AF) SHILLONG
₹40,000
Yes
10 Feb 2023
2 Dec 2022
28 Dec 2022
2 Dec 2022
26 Dec 2022
9 Dec 2022
2 Dec 2022 - 6 Dec 2022
Amount
Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same.
M & L for cleaning of sewage line of any bore and description by rodding with green bamboo stick/cane stick/steel wire or any other method as directed and well flushing with water for easy flow and removal of sludge/silt, foreign materials and other deposits and disposing off the accumulated sludge/mud, foreign materials and other deposits to a distance not exceeding 50m, buried in ground to maintain hygine complete all as directed. (Note : The cleaning operation shall be carried out in suitable lengths)
M & L for cleaning and clearing of blocked pipe between floor/nahani trap and Gully trap by removing accumulated sludge/mud including cleaning and clearing of floor/nahani trap and Gully trap on either side and disposing off the accumulated sludge/mud to a distance not exceeding 100m, buried in ground to maintain hygine complete all as directed.
M & L for cleaning and clearing of existing septic tanks any size/depth by bailing out effluent, removing the silt/sludge & other deposits manually or by any other method as directed and removing the silt/sludge & other deposits and transporting the same in covered van/trolley to a distance not exceeding 100m, excavating pit and safely buried the same in pit, top portion of pit covered with soil and excess soil spreaded evenly or removed to a distance not exceeding 50m, appllying bleaching powder to maintain hygine and writing particulars of cleaning date with synthetic enamel paint on septic tanks complete all as directed. (Notes :- (i) Volume occupied by silt/sludge & other deposits (Semi solids) shall only be measured and paid for against the item. (ii) Volume occupied by effluent (liquid above silt/sludge & other deposits) shall not be measured and paid. However quoted rates shall be deemed to be includde for bailing out of effluent.)
M & L for removal of blockage of sewage line SGSW of 150mm bore by replacing a length of pipe of 50cm as described hereunder:- (a) Excavation and earthwork for removal and replacement of pipe including refilling after repair. (b) Demolition of haunching/benching concrete including sewage pipe. (c) Replacing sewage pipe with socket or by using collar on either end and jointing with cement mortar. (d) Carry out haunching/benching using PCC 1:3:6 type C-2 using 40mm graded stone aggregate. (e) Removal of debris to a distance not exceeding 100m. (f) Removal of sludge/silt and disposing off the same to a distance not exceeding 100m, buried in ground to maintain hygine complete all as directed.
Cleaning of sewage line from Water closet/ Gully trap to 1st Man hole / Cleaning of Water closet in 1st floor to 1st man hole including removal of sludge by rodding or by another method all as directed
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, pipe lines etc. in Hard / Dense soil, complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil complete all as specified and directed.
Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Demolition of unreinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position not otherwise specifically provided for and removal all rubbish material complete all as directed.
Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of cast iron (sand cast) soil, waste and vent pipe upto 100mm bore alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required including removing vegetation growth around pipes as required, making good surface to match with existing including necessary scaffolding complete all as specified and directed. (Note :- The length shall be measured along the centre line including fittings and accessoires).
Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including PCC bedding and haunching etc complete all as specified and directed for following sizes:-
100/150mm bore
200mm bore
M&L for Plain Cement Concrete (PCC) 1:3:6 type C-2, (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L for precast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.
M & L for rendering 15 mm thick on fair faces of brick masonry/ concrete surface in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M & L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, seismic and other similar bands, bed plates, road side kerbs, coping/cills, bed block for embedding hold fast etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as directed.
M & L for providing cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains and benching including use and waste of formwork where necessary and finishing the exposed top surface of concrete even and smooth using extra cement complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M & L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces joint as directed and setting in CM 1:4 complete all as specified and directed. (Note :- Reinforcement shall be measured and paid for separately under respective items of the BOQ.)
M & L for Reinforced cement concrete 1:2 : 4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed.
M & L for Use and waste of flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in bedding to SGSW/NP-2 drain pipe including packing under and haunching against the sides of the pipes after they are laid and tested complete all as specified and directed for following bore (internal dia) pipes:-
150mm bore pipe
200mm bore pipe
S & F reinforced concrete pipes, class NP-2, laid and jointed complete with collars and tested complete all as specified and directed for following bore pipes:-
150mm bore pipe
200mm bore pipe
M & L for salt glazed stoneware drain pipes grade 'A' ISI marked, laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed for following bore pipes:-
150mm bore pipe
200mm bore pipe
S & F 100mm bore cast iron(sand cast), soil, waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.
S & F 100mm bore cast iron bends (any radius), diminishing pieces or tapers ( larger bore measured) with oval access door fixed with cement joints all as specified and directed.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed for following sizes:-
75 mm bore
110 mm bore
S & F PVC (SWR) bend with oval access door of any radius complete all as specified for following sizes:-
75 mm bore
110 mm bore
S & F PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door complete all as specified and directed for following sizes:-
110 mm bore
S & F PVC (SWR) vent cowl complete all as specified and directed for following sizes:-
110 mm bore
S & F in repairs stack clamps for 100mm bore CI pipe out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts & nuts and securing ends of stays to wall or roof complete all as specified and directed.
S & F in repairs PVC (SWR) floor trap 75mm dia outlet plain with Stainless steel grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as directed.
S & F in repair grating doom 100 mm dia of PTMT (minimum weight 25 gms), complete all as specified and directed.
Cutting in to existing manholes / septic tank for connecting new drains making good to 150mm/200mm bore pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and pipe reforming benching as required complete all as specified and directed.
M & L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:4, for laying floor finishes complete all as specified and directed.
M & L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed.
M & L 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
M & L for PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in foundation, filling under floor, in sunken floors etc complete all as specified and directed.
M & L for treating sunken floor surfaces with two coats (one priming coat and one finishing coat) of water proofing chemical PIDIFIN 2K of Dr Fixit (or any other brand approved by GE) all as per Manufacturer's instructions complete all as specified and directed.
M & L for Pavement floor vitrified tiles of size 400x400x10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in floor complete all as specified and directed.
M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.
M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.
S & F in repairs vitreous China squatting pan (Orissa pattern) water closet (white) of size 580 mm x 440 mm with integral foot rests, 'P' or 'S' trap, including connection to trap, flushing pipe and antisyphonage pipe etc and including provision of PCC (1:5:10) type E-2 lean concrete in filling, making good to floor (excluding flushing cistern and flush pipe etc) complete all as specified and directed.
S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.
S & F in repairs plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repair 15 mm dia Brass CP, wall mixer 3 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without Hand and overhead shower) (Concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed. (Product Code & Make :- Cat Part No CON-281KN of JAQUARor equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine)
S & F in repairs 15mm bore central hole Basin mixture for mixing hot and cold water chromium plated fancy type without popup waste system with 450mm long barided hoses complete all as specified and as directed. (Product Code & Make :- Cat Part No CON-167KNB of JAQUARor equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine)
S & F in repairs Hand Shower (Health Faucet) with 8mm dia 1.20 metre long flexible tube with wall hook complete all as specified and as directed. (Product Code & Make :- Cat Part No ALD-573 of JAQUAR or equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine)
S & F in repairs Hand Shower of 95mm dia round shape multi flow (ABS body chrome plated with grey face plate) with rubit cleaning system with 8 mm dia and 1.00 mtr long flexible tube and wall hook complete all as directed. (Product Code & Make :- Cat Part No HSH-1739 of JAQUAR or equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine)
M & L in repair for 15 mm dia cast copper alloy Chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. (Product Code & Make :- Cat Part No.- 8712 of Make Prayag or equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
S & F in repairs 15 mm dia cast copper alloy Chromium plated two way Angle valves, with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. (Product Code & Make :- Cat Part No.- 8711 of Make Prayagor equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
S&F in repairs chromium plated towel rail complete all as specified and directed. (Product Code & Make :- Cat Part No. BA-40 of Make Prayag Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
S & F in repair Stainless steel Towel rack 600mm long with lower hangers, fixed to walls with brass screws complete all as specified and directed. (Product Code & Make :- Cat Part No ACN-1181S of JAQUAR Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
S & F 15mm bore bib tap cast copper alloy fancy type chromium plated long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F 15mm bore stop valve cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
S & F in repairs 15 mm dia cast copper alloy Chromium plated one way Angle valves, with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. (Product Code & Make :- Cat Part No.- 8710 of Make Prayag or equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
S & F for 15 mm bore pillar taps, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and directed.
S & F in repairs 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified and directed.
S & F in repair chromium plated 32mm size bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & wall flange complete all as specified and directed. (Product Code & Make :- Cat Part No ALD-769L300x190 of JAQUAR or equivalent model of makes Jaquar & Company Pvt Ltd/ Marc/ Kohler/Cera/ Parryware/ Grohe/ Crabtree/ Blue Star & Silver Shine).
Taking up or down steel tubing and connections etc fixed in wall/ceiling/floor etc including all fittings including cleaning of serviceable pipe and segregating for re-use and removing unserviceable pipes from site of work complete all as specifed and as directed for the following sizes:-
15mm bore
20mm bore
S & F galvanized steel water tubing medium grade as per IS-1239 ( Part- I) with all new fittings fixed to walls and ceilings or laid in floor in new or old alignment complete all as specified and as directed for the following bore of pipe:-
15mm bore
20mm bore
Refixing of serviceable galvanized steel water tubing retrieved from Ser item No 67here-in-before with provision of all new fittings fixed to walls and ceilings or laid in floor in new or old alignment complete all as specified and as directed for the following bore of pipe:-
15mm bore
20mm bore
M&L for disconnecting existing tanks, setting aside (or lowering if required) for cleaning etc and hosting if required, reconnectings and refixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. for the capacity of tanks exceeding 250 and not exceeding 500 Litres complete all as specified and directed.
S & F in repairs PVC water storage tank lid of round shape, insect proof and with locking arrangment complete all as specified and directed for following capacities PVC water tank:-
M & L for Polythene film, black, 50micron laid in floors complete all as specified and directed.
M & L for cleaning and clearing of existing septic tanks any size/depth by bailing out effluent, removing the silt/sludge & other deposits mechanically with combined high pressure water jetting cum suction (Vaccum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fibre braided water jetting hose and through conical/ round shape nozzle pipe and flushing after cleaning and removing the silt/sludge & other deposits and transporting the same in covered van/trolley at a place as directed ,excavating pit and safely buried the same in pit, top portion of pit covered with soil and excess soil spreaded evenly or removed to a distance not exceeding 50m, appllying bleaching powder @ 1Kg / Sqm of bcovered area to maintain hygine and writing particulars of cleaning date with synthetic enamel paint on septic tanks complete all as directed. (Notes :- (i) Volume occupied by silt/sludge & other deposits (Semi solids) shall only be measured and paid for against the item. (ii) Volume occupied by effluent (liquid above silt/sludge & other deposits) shall not be measured and paid. However quoted rates shall be deemed to be includde for bailing out of effluent.)
madan enterprise
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .