Construction of Newly upgraded 50 Bedded Civil Hospital Bangana in Distt. Una

Amount

Earth work in excavation in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Earth work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in ordinary rock / all kind of soil (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, upto all leads and lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge all leads and lifts including clearing of jungle.Pick Jumper work and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST, Labour Cess or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc exceeding 80 mm dia. but not exceeding 300 mm dia including excavation for sockets,in ordinary rock / all kind of soil ncluding dressing of sides and ramming of bottoms, upto all leads and lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge all leads and lifts including clearing of jungle.Pick Jumper work and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST, Labour Cess or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns, etc. for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platformas per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Stairs, (excluding landings) except spiral stair cases as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction by the Engineer in charge upto all floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets,kerbs and steps etc as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement : five coarse sand : ten graded crushed stone aggregate 40mm ( forty milimeter nominal size) mechanically mixed and curing complete excluding cost of form work and finishing in Retaining wall/ Breast wall in any thickness including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc upto all floor level as per the direction of Engineer- In-Charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (one cement : five fine sand : ten graded/ crushed stone aggregate 40 mm (forty millimeter) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in all work in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 ( One cement : four coarse sand : eight graded crushed stone aggregate 40mm (forty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work in foundation and plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 ( One cement : three coarse sand : six graded crushed stone aggregate 20mm (twenty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work in foundation and plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:2:4 ( One cement : two coarse sand : four graded crushed stone aggregate 20mm (twenty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work foundation and plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded/crushed stone aggregate 40 mm (forty millimeter) nominal size up to haunches of 100mm (one hundred millimeter) dia meter S.W. pipes including bed concrete as per standard design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying damp proof course 40mm (forty millimeter) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.70 kg (one point seventy kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work finishing and reinforcement with graded crushed stone aggregate 20mm nominal size all work upto plinth level upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated with graded crushed stone aggregate 20mm nominal size including curing complete excluding cost of form work finishing and reinforcement in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work finishing and reinforcement work with graded crushed stone aggregate 20mm nominal size in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all height in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Stone filling dry hand packed under floor/retaining walls including watering, ramming and consolidating with at least one broken stone face and packed in proper upto all heights as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing Fe-500D tor steel reinforcement make of SAIL,TISCO,RINL,JINDAL, PANTHER of JSPL,SHAYAM STEEL as per structural design for reinforced cement concrete work including straightening, cutting, bending, binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm (six millimeter) thick Plaster with cement mortor 1:3 (one cement : three sand) in any floor/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6(One cement: six coarse sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortor 1:4(one cement: four coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor level including scaffolding in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor level in cement mortor 1:4 (one cement: four coarse sand) including scaffolding as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing cup board shutters 25 mm (twenty five millimeter) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked of Action tesa, Green Novapan, National, Archid Ply, Kitply make , exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm (twenty five millimeter) wide x12 mm (twelve millimeter) thick with necessary screws and bright finished stainless steel piano hinges, complete upto all floor level as per the direction by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 18mm (eighteen millimeter) thick Pre-laminated flat pressed 3 (three) layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked of Action tesa, Green Novapan, National, Archid Ply, Kitply make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) thick Pre-laminated flat pressed 3 (three) layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked of Action tesa, Green Novapan, National, Archid Ply, Kitply make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 6mm (six millimeter)thick commercial ply conforming to IS:1328 BWR type made of Action Tasa, Green ply, Kitply, National, Archid Ply make plain lining with necessary screws, nuts and bolts/ nails, including a coat of approved primer on one face, and fixed on wooden / steel frame work complete any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and Fixing 1mm (one millimeter) thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing second class teak wood lipping/ moulded beading or taj beading of size 18 x 5 mm eighteen into five millimeter) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 12mm(Twelve millimetre) thick Rai wood plain liningwith tongued and grooved jointing with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete upto all floor level as per direction of Engineer-in- charge (Frame work shall be paid for separately), including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing sal wood work in frames of false ceiling, partitions etcetera sawn and fixed in position with necessary stainless steel screws etcetera upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 2nd class teak wood wooden moulded corner beading of 75x25 mm (seventy five into twenty five millimetre (base and height) triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etcetera upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyester coloured powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make Hindalco, Jindal, Indian Aluminium Company conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) complete upto all floor level as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Polyester coloured powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make Hindalco, Jindal, Indian Aluminium Company conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) complete upto all floor level as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge complete upto all floor level (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm (one point two five millimeter) thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, (one hundred twenty five kilogram) for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing fly proof staimless steel wire gauge designation 140G (One hundred forty G) with wire of dia 0.71mm (Zero point seven one millimeters) to windows and clerestory windows including 60x20mm beading rubber (Sixty into twenty millimetres) or screws upto all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete upto all floor level as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick Pre-laminated particle board with decorative lamination on both sides,flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling of Novapan, Kitply, National, Archid Ply, Action Tesa Green make fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete upto all floor level as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.63mm thick PGI sheet covering of approved pattern & design, made out of machine cut covering with stainless steel screws including providing aluminium washers 2 mm thick , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge with all accessories as required as per the specification upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST, Labour Cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimetre)aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing75mm (seventy five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass 50 mm (fifty millimeter) cupboard or wardrobe knobs with nuts complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter ) bright finished hard drawn hooks and eyes as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter ) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point two five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Kota stone slab flooring over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortor 1:4 (one cement :four coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete 25mm (twenty five millimeter) thick upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Kota stone slab 20 mm (twenty millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement :three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying full body matt finished/Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge with water absorption less than 0.08% and conforming to IS:15622, of approved make Kajaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson , in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete of class designation tiles 600x600 mm. complete upto all floor level ncluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying five point five millimeter or more thick double charged vetrified rectified Glazed Ceramic floor tiles (grade IV) of size 300x300 mm (three hundred into three hundred millimeter) or more of Kazaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson make, of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etcetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm (grade IV) of size 300x300 x9.8mm (three hundred into three hundred into nine point eight millimeter)having with water absorption less than 0.5% and conforming to IS:15622 of approved make of Kazaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson make, of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles in different size (thickness to be specified by manufacturer), or as directed by the Engineer-in-charge 600mm x 600mm ( six hundred millimeter into six hundred millimeter) of Kajaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson make, with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etc. complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge of 1st quality conforming to IS : 15622 of Kazaria, NITCO, SOMAMY, ORIENT, RAK brand of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Grouting the joints of flooring tiles Size of 300x300 mm (three hundred into three hundred millimeter) having joints of 3 mm (three millimeter) width, using epoxy grout mix of 0.70 kg (zero point seventy kilogram) of organic coated filler of desired shade (0.10 kg( zero point ten kilogram) of hardener and 0.20 kg (zero point twenty kilogram) of resin per kg), including filling / grouting and finishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Grouting the joints of flooring tiles Size of 600x600 mm (six hundred into six hundred millimeter) having joints of 3 mm (three millimeter) width, using epoxy grout mix of 0.70 kg (zero point seventy kilogram) of organic coated filler of desired shade (0.10 kg( zero point ten kilogram) of hardener and 0.20 kg (zero point twenty kilogram) of resin per kg), including filling / grouting and finishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Granite Stone 8mm(eight millimetre) thick (mirror polished and machine cut edge) work for wall lining in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings upto all height with special adhesive over 12 mm(twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Extra for pre finished nosing in treads of steps of marble stone/ sand stone slab upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm(twenty millimetre into twenty millimetre into four millimetre) of Kajaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson make,in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

P/L Mandana red sand stone slab in uniform shade in flooring 40mm average thick on 20mm average thick base of cement mortar 1:5 (one cement : fivesand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto all floor level . including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all 80mm(eighty millimetre) thick cement concrete paver block of M-35 grade with approved colour, design & pattern of NTC make,including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all 60mm(sixty millimetre) thick cement concrete paver block of M-35 grade with approved colour, design & pattern of NTC make,including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Marble stone flooring in treads of steps and risers using single length up to 2.00(two point zero metre). flooring with 18 mm(eighteen millimetre) thick marble stone, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Udaipur green marbleupto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Marble stone flooring in treads of steps and risers using single length up to 2.00(two point zero metre). flooring with 18 mm(eighteen millimetre) thick marble stone, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Makrana white second quality upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing in position collapsible steel (Tata/Sail)shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 0.50mm(zero point fifty millimetre) thick precoated galvanised steel Tata Durashine make,size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm(zero point fifty) (+ 0.05 %)( plus zero pointzero five precetage) total coated thickness with zinc coating 120 grams(one hundred twenty gramms) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns. Sheet should have protective guard film of 25(twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 (twelve)metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)(five point five into five point five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing prepainted steel sheet ridges or hips plain (500 - 600mm)(five hundred to six hundred millimetre) (Tata/Sail) make in roofing having 0.50 mm(zero point fifty) (+ 0.05 %)( plus zero pointzero five precetage) of total coated thickness with zinc coating 120 grams(one hundred twenty gramms) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet Crimp curve (Tata/Sail) make in roofing having 0.50 mm(zero point fifty) (+ 0.05 %)( plus zero pointzero five precetage) total coated thickness with zinc coating 120 grams(one hundred twenty gramms) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet Flashings/ Aprons.( Upto 600 mm(six hundred millimetre)(Tata/Sail) make having 0.50 mm(zero point fifty) (+ 0.05 %)( plus zero pointzero five precetage) total coated thickness with zinc coating 120 grams(one hundred twenty gramms) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet Gutter (600 mm (six hundred millimetre over all girth) (Tata/Sail) make having 0.50 mm(zero point fifty) (+ 0.05 %)( plus zero pointzero five precetage) total coated thickness with zinc coating 120 grams(one hundred twenty gramms) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC clips Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter on wall face unplasticised Rigid PVC rain water pipesof Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make having working pressure 4.00 kg (four point zero zero kilogram) per Square centimeter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC plain bend Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC plain shoe Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC Coupler Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Structural steel work riveted, bolted or welded in built up sections in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work approved make i.e.TATA/JINDALSail, Tisco Shyam Steel, or as directed by the Engineeer-in-charge including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights all floor as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. tube hand rail of approved size i.e.TATA/JINDALSail, Tisco Shyam Steel, or as directed by the Engineer-in-charge by welding etc. to steel ladder railing, balcony railing, stair case railing and similar works, including applying priming coat of approved steel primer in all heights upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

P/F 4mm thick Alluminium Composite panel (ACP) Tiles (Zindal make) in partitions with buttjointing and nails (frame work andcover fillets to be measured andpaid for separately) complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing Accustic Aerolite sheet mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance> 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item(galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main 'T'. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plasticrawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, Good service taxes, or other taxes imposed by the Government.

Providing and fixing Indian teak wood second class 75x 65mm (seventy five into sixty five millimeter ) wooden moulded hand railing with iron screws, plugs and priming coat on unexposed surface etcetera complete any height in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing mild steel i.e.TATA/JINDALSail, Tisco Shyam Steel, round holding down bolts with nuts and washer plates complete.upto all floor level,including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Supplying and fixing rolling shutters of Tata or Sail make approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm(twety seven point five centimetre ) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454(four thousand four hundred fifty four) - part 1(one) and M.S. top cover of required thickness for rolling shutters 80x1.25 mm(eighty into one point twenty five ) M.S. laths with 1.25 mm( one point twenty five ) thick work in single section, fixed with or top cover complete.upto all floor level,including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing ball bearing for rolling shutters.complete.upto all floor level,including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero per ten square metre) (ASAIN, NEROLAC,ICI-DULUX, Beger, (Luxol High Glass)Shalimar paint (premium apecolite Gloss) of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax GST or other taxes imposed by the Government

Applying priming coat make of ICI, Nerolac, Berger, Asian Paint, Shalimar with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade of Nerolac/ Asian/Berger ICI (Dulux Gloss) (Luxol high Gloss) (Premium Apcolite Gloss) Shalimar make two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five liter per ten square meter) of approved brand and manufacture in all height all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture new work upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

6mm (six millimeter) plaster on cement concrete or reinforced cement concrete work with white cement Birla white/J.K white based polymer modified self curing mortar of approved make as per the direction by the Engineer in charge in any floor level any height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six coarse sand) in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

20mm (twenty millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six coarse sand)in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 12mm(twelve millimetre) thick GRC tile of NTC make Clading work for wall lining upto all height with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and applying white cement Birla white/J.K white based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering with dry distemper of Berger (Castle) Jenson & Nicholson) (J&N) Golden, Paint Aqualac make and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.as per the direction by the Engineer in charge in all floor leve/height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications of Nerolac/Asian/Berger ICI (Dulux Gloss) (Luxol High Gloss) (Premium Apcolite Gloss) Shalimar make two or more coats applied on walls @ 1.25 ltr/10 sqm (one point twenty five liter per ten square meter) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zero point seventy five liter per ten square meter) as per the direction by the Engineer in charge in all floor leve/height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand of Berger (Castle) Jenson & Nicholson) (J&N) Golden, Paint Aqualac make and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of(Neolac/Assian/Berger) (Bison Acrylic) (Tractor Acrylic ) Shalimar required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing, laying 23cm dia half round (to level or slopes) and joining with stiff mixture of cement mortor in the proportion of 1:1 (1 cement : 1 sand) salt glazed stone ware pipes grade "A" of the internal diametres including testing of pipes and joints complete. including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing & fixing 4.0 mm (four point zero millimetre )thick glass panes of Sant Govind make with putty and glazing clips in steel doors, windows, clerestory windows, all complete including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing sheet covering over expansion joints of Zindal make with iron screws as per design.Aluminium fluted strips 3.15 mm thick.including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm nominal bore G.I. pipe with G.I. fittings in external work/internal work BST, Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including trenching and refilling etc. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm nominal bore G.I. pipe with G.I. fittings in external work/internal work BST, Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including trenching and refilling etc. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Making connection 25 to 40mm (twenty five to forty millimeter) nominal bore of G.I. distribution branch with G.I. main by providing and fixing tee, including cutting and threading the pipe etc. complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass ferrule make of Zoloto, Sant, L&K, Leader with C.I. mouth cover including boring and tapping the main complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipe Concealed work, including cutting chases and making good the wall etc 1216 (16 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure pipe Concealed work, including cutting chases and making good the wall etc1620 (20 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete upto all floor level including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral type foot rests of Cera/ Hindware / Parryware, Sanitarywar, Neycer in white shade,including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid of Cera/Hindware/Jaquar, Parryware, Sanitaryware, Neycer in complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make of Parryware,Hindware, Sanitaryware, Neycer, Cera shape size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) dia CP Brass single hole basin mixer of approved quality of preferred make of Cera/Hindware Parryware, Sanitaryware, Neycer as per standard bidding document, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimeter) with a 15 mm (fifteen millimeter) CP Brass single hole basin mixer complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixingVetereous china sink with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,of approved quality of preferred make of Cera/Hindware Parryware, Sanitaryware, Neycer as per standard bidding document, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Surgeon type wash basin of size 660x460 mm(six hundred sixty into four hundred sixty millimetre) with a pair of 15 mm (fifteen millimeter)C.P. brass pillar taps with elbow including operated levers complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of preferred make of Cera/Hindware Parryware, Sanitaryware, Neycer for wash basin completely recessed at the back for the reception of pipes and fittings complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Semi rigid 40mm (forty milimetre) dia PVC waste pipes for sink or wash basin including waste fittings complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of preferred make Atul Modi Guard Golden fish with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing CP brass towel rail 750mmx20mm (Seven hundred fifty into twenty millimetre) complete of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko long of Jaqaur (AEC-1111) complete with CP brass brackets fixed to wooden plugs with CP brass screws including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x120mm x5mm(Six hundred into one hundred twenty millimetre into five millimetre) glass shelf Jaquar (ACN-CHR-1171N ) or its equivalent in Hindware make with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish Holder having length of 138mm(one hundred thirty eight millimeter), breadth 102mm (one hundred two millimeter), height of 75mm (seventy five millimeter) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grams) of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko brackets fixed to wooden cleats with CP brass screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass bib tap with quarter turn head 15mm (Fifteen millimetre) dia of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko Hindware/Parryware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass bib tap (long body ) with quarter turn head 15mm (Fifteen millimetre) dia of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko Hindware/Parryware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass angle valve with quarter turn head 15mm (Fifteen millimetre) dia without nuts and pipe of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45cm (Forty five centimetres) length 15 mm (Fifteen millimetre) nominal bore heavy duty Finolex/ Cera/ Jaguar or hindware make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Zoloto, Sant, L & K Leader make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Zoloto, Sant, L & K Leader make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore brass ball valve ( heavy duty ) Zoloto, Sant, L & K Leader make horizontal plunger type high pressure with polythene plastic floats including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ complete with CI grating brick masonry chamber in cement mortar 1:5 (One cement : five coarse sand) and water tight C.I. cover with frame of 300 x 300mm (Three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.53kg (Four point five three kilogramme) and frame to be not less than 2.72 kg (Two point seven two kilogramme) square mouth trap 100x100mm (One hundred into one hundred millimetre) size P-Type including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimetre) Parryware, Hindware, Sanitaryware, Neycer, Cera make with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of single half stall urinals with 5(five) litre P.V.C. automatic flushing cistern complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimetre) Parryware, Hindware, Sanitaryware, Neycer, Cera make with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of two half stall urinals with 5(five) litre P.V.C. automatic flushing cistern complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimetre) Parryware, Hindware, Sanitaryware, Neycer, Cera make with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of four half stall urinals with 10(ten)) litre P.V.C. automatic flushing cistern complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing toilet paper holder CP brass of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko make (ACN-1151N) or its equivalent Hindware/Parryware complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of Sintex or equivalent make (I.S.I. marked five layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals.as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP Brass Single lever telephonic wall mixer of 15mm dia (fifteen millimetre diametre) of Kingston, Gem, Parko, Techno, Jal, ESS-ESS, Jaguar, Seiko make (ACN-1151N) or its equivalent Hindware/Parryware complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets andstainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required Kitchen Sink with drain some Sink Neelkanth make complete upto all floor level :510x1040 mm(five hundred ten into ten hundred forty millimetre ) bowl depth 250mm(two hundered fifty millimetre) with drain board of Daimond make ,as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen Sink with drain some Sink Neelkanth make complete upto all floor level :610x510 mm (six hundred ten into five hundred ten millimetre)bowl depth 200mm (two hundred millimetre) without drain board of Daimond make ,as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make of Jal, Jaquar,Kingstone, Gem, Parko, Tecno, ESS, Seiko Make complete upto all floor level as approved by Engineer - in - charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989spigot and socket soil, waste and ventilating pipes of high pressure and testing Complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 spigot and socket soil, waste and ventilating pipes of high pressure and testing Complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm( one hundred millimetre) inlet and 75 mm (seventy five millimetre) S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floorsComplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre)nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 bend of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five ten millimetre)nominal sizeS&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 bend of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 single equal plain junction of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm (seventy five into seventy five into seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 single equal plain junction of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre)nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 bend of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five ten millimetre)nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 bend of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimetre)nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 collar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five ten millimetre)nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 collar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 double equal junction of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm (seventy five into seventy five into seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 double equal junction of required degree with access door, insertion rubber washer 3 mm(three millimetre) thick, bolts and nuts complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 double equal plain junction of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm (seventy five into seventy five into seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 double equal plain junction of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x110x110mm (one hundred ten into one hundred ten into one hundred ten millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 single equal plain junction of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75x75x75mm (seventy five into seventy five into seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 single equal plain junction of required degree including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one ten hundred millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 off set including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal size S&S centrifugal cast (Spun) iron pipes(Class LA) conferming to IS-3989 off set including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one ten hundred millimetre) nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal size M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimetre) nominal size lead calked joints to spun iron or Centrifugal iron pipes and specials i/c testing of joints ut excluding the cost of pig lead including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimetre) nominal sizelead calked joints to spun iron or Centrifugal iron pipes and specials i/c testing of joints ut excluding the cost of pig lead including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with outer frame for manhole cast iron cover and frame 455x610mm(Four hundred fifty five into six hundred ten millimeters) rectangular C.I. cover of internal dimension (Light duty single seal pattern-I) internal total weight of cover and frame to be not less than 23kgs(Twenty three kilogramme) ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 200mm ( two hundred millimetre) cast iron Rungs with chequered or ribbed non slip surface in manhole with 200mmx200mmx100mm ( two hundred millimetre into two hundred millimetre into one hundred millimetre) cement concrete 1:3:6 ( one cement: three sand: six graded crushed stone agrregate ) As per Architectural Drg No 107-116 Job No.3111 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 3.00 HP (Three Horse power) H.P. Tullu Pump (Serex Kirloskar, Worthington, Crompton make) with accessories complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

VIPUL CONSTRUCTIONS

M/s Satish Kumar Sharma

OM PARKASH SHARMA AND SONS

MSC Roads and Bridges Private Limited