Creation of seed processing and storage infrastructure/ facility for the Deptt. of SST at Dr YSP University of Horticulture and Forestry Nauni-Solan.

Amount

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size etc. complete in all respect as per satisfaction of Engineer-in-charge. a) Kiln seasoned and chemically treated hollock wood.

Providing and laying Glossy vitrified floor tiles double charged in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Somani/Orient bell/ somany make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm

25 mm thick (twenty five milimetre) Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge a) One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work

Renewing glass panes and refixing existing wooden fillets etc. in all respect as per satisfaction of Engineer-in-Charge a).Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. a).With cement mortar 1:4 (one cement : four sand)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar

Demolishing cement concrete manually/by mechanical means including disposal of material within all leads etc. complete as per direction of Engineer -in–charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Providing and fixing P.V.C 32mm semi rigid waste pipe for sink, uniral and wash basin etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing 45 cm length and 15 mm nominal dia uplasticised PVC connection pipe with brass unions complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge(Seiko/ sparton/ smile Czar make).

Supplying and installation of Research module Laboratory Units (Waldner / Kotterman / Godrej make) with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under Storage Unit with cam lock Ht. 900 mm with metal shutter MT-1200W-750D-9H – 1 No. AT-450W-750D-9 H – 2 Nos. AT-1200W-750D-9H – 2 Nos Under bench cabinet 600W- 450D-674H-2S – 3 Nos. Under bench cabinet 450W- 450D-674H-1S – 2 Nos. LS-600W-P – 3 Nos. Side panel for sink Unit - 1 No. Inline sink Unit 750W-750D-9H - 1 No. Rear side panel 750D-9H - 2 Nos. PP Drop sink 560x355 - 1 No. 16A 1 way Switch Model No M 130 - 8 Nos. 6/ 16A 6pin Shutter socket Model No M 1332 - 8 Nos. Table Mounted Trunking – 4 Nos. IFBFF- 3362IBS - 1 No.

Supplying and installation of Research module Laboratory Units (Waldner / Kotterman / Godrej make) with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under Storage Unit with cam lock Ht. 900 mm with metal shutter MT-1200W-600D-9H – 2 Nos. AT-1200W-600D-9 H – 6 Nos. Under bench cabinet 600W- 450D-674H-2S – 10 Nos. LS-600W-P – 6 Nos. ISLAND side panel set 1200W-9H - 2 Nos. Bracket for Island table - 5 Nos. C11831G223 - 2 Nos.

Supplying and installation of Research module Laboratory Units (Waldner / Kotterman / Godrej make) with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under Storage Unit with cam lock Ht. 900 mm with metal shutter MT-450W-600D-9H – 1 No. AT-450W-600D-9 H – 1 No. Under bench cabinet 450W- 450D-674H-1S – 2 Nos. Side panel for sink Unit - 1 No. Inline sink Unit 750W-600D-9H - 1 No. PP Drop sink 560x355 - 1 No. 3 way water faucet model 100-32 - 1 No.

PREM KRISHAN