SPECIAL REPAIR OF B VEH GARAGE OF 257 FD WKSP COY EME AT 330 BDE SPECIAL REPAIR TO DRAIN COVER OF STROM DRAIN LINE AT CQA FFE AUNDH CAMP AND PROVN OF TOILET BLOCK AT 8 MAHAR UNDER GE MH AND RH KHADKI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dence type of soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated material (soil) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Material and Labour for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and Labour for Reinforced cement concrete (design mix) in M-25 in (20mm graded stone aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and Labour for Reinforced cement concrete (design mix) in M-25 in (20mm graded stone aggregates) Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and Labour for Reinforced cement concrete (design mix) in M-25 in (20mm graded stone aggregates) roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and Labour for Reinforced cement concrete (design mix) in M-25 (20mm graded stone aggregates) in roof Slab supported on walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and directed.

Material and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions Square, Circular rectangular on plan or polygonal complete all as specified and directed.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.on flat rough surface complete all as specified and directed.

Material and Labour for Formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and Labour for rendering 10mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and Labour for mild steel TMT bars 6 mm to 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and Labour for Precast cement concrete block masonry type C1 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Material and Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and Labour for Hardcore of broken stone or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified and directed.

Material and Labour 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor is to be rough finished complete all as specified and directed.

Material and Labour for 75mm thick, PCC (1:3:6), Type C-1, using 20mm graded stone aggregate as in Plinth protection etc surface finished even and fairwithout using extra cement including necessary form work if required, provision of vertical joints at 2 mtr centre to centre complete all as specified and directed.

Material and Labour for Non Skid Ceramic tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and directed.

Material and Labour for Glazed Ceramic Coloured tiles of size 300mmX600mmX7mm as in Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed.

Supply and Fixing aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator complete all as specified and directed.

Supply and Fixing aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade including taking down existing steel window complete all as specified and directed.

Supply and Fixing Solid coloured PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and directed.

Supply and Fixing Factory made coloured solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and directed.

Supply and Fixing Aluminium anodised barrel tower Bolt of size 150 mm size of extruded section complete all as specified and directed.

Supply and Fixing Aluminium cast type anodised Handle, size 150mm long complete all as specified and directed.

Supply and Fixing 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed.

Supply and Fixing Aluminum aodised sliding door bolts, bearing ISI mark, 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Material and Labour for applying two coats of cement base paint on plastered surfaces of walls including preparation of new surface complete all as specified and directed.

Material and Labour for applying three coats of white wash to newly plastered surface of ceiling including preparation complete all as specified and directed..

Material and Labour for applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall complete all as specified and directed.

Supply and Fixing 20mm bore GI tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

Supply and Fixing 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. [The rate is deemed to be included for concealing of GI tubes wherever required and directed].

Supply and Fixing fancy type two way Bib cock 15mm dia , fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed complete all as specified and directed. (Make :Jaquar/Hindware/Cera/Prayag or equivalent).

Supply and Fixing for fancy type CP brass angular stop cock 15 mm dia complete all as specified and directed. (Make :Jaquar/Hindware/Cera/Prayag or equivalent).

Supply and Fixing PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed.

Supply and Fixing fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe complete all as specified and directed. (Make :Jaquar/Hindware/Cera/Prayag or equivalent).

Supply and Fixing CP grating ring or frame square or round 100mm size complete all as specified and directed.

Supply and Fixing wash down water closet EWC vitrious china white in colour one piece (incl flush cistern , seat cover) with all fitting complete and fixing with outlet pipe complete all as specified and directed by the Engineer-in-Charge. Make : Jaquar/ Cera/Hindware/ Parryware.

Supply and Fixing under counter sunk vitreous china wash hand basin white size 460x342/560x450mm or above miniumum depth 155mm or above under counter oval type including bottal trap, coupling making good as specified and directed.and all connecting accessories, etc (first quality) complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Cera/Hindware/ Parryware.

Supply and Fixing Vitreous china Urinal half install type white, with grating and union for discharge pipe fixed icluding all reqd necessary fittings as per instructions of manufacturers, bottal trap , fixing to existing wall complete all as specified and directed. Make : Jaquar/ Cera/Hindware/ Parryware.

Supply and Fixing PVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints laid in trenches or floor & wall complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor/ceiling and wall complete all as specified and directed.

Supply and Fixing 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fixing PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directed..

Supply and Fixing PVC (SWR) branch piece 110 mm bore, single Y equal or unequal complete all as specified and directed.

Supply and Fixing PVC (SWR) junction 110mm bore single T equal or unequal complete all as specified and directed.

Supply and Fixing in repairs Powder coated Alu grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws complete all as specified and directed.

Material and Labour for 20mm Granite work (table rubbed and polished) in steps, jambs, cills, WHB platforms,counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, complete all as specified and directed. Note : The rate quoted is deemed to be included for full moulding of edges and making, opening for kitchen sink complete all as specified and directed.

Material and Labour Cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth complete all as specified and directed.

Supply and Fixing in repairs towel ring chromium plated brass fancy type complete all as specified and directed by the Engineer-in-Charge. (Make :Jaquar/Hindware/Cera/Prayag or equivalent).

S/F in repairs for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

Supply and Fixing Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 500 Liters Capacity double layered 'ISI' marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed.

Supply and Fixing 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.

Material and Labour for applying roof treatment completed all as specified and directed as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacturer's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing a coat of bitumen primer @ 0.40 Litre/Sqm over plastered surfaces of roof including parapet surfaces. (iii) Providing one layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with polyester non woven fabric (weighing not less than 150 Gms/Sqm). Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note:(a) Laying of APP based polymeric membrane shall be done by torch application method or as per manufacturar's instruction. (b) Side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's instructions. (c) The make of polymeric membrane shall be as per PS Specification of CA. (iv) Applying two coats of bituminous aluminium paint on top of APP membrane.

Supply and Fixing in repair (any type & size of door) aluminium anodised door with frame and shutter and glazing 5 mm thick tinted glass or 12 mm thick prelaminated particle board exterior grade in panels, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleat, hydraulic double action floor door spring, iron mongary etc. section of aluminium door including powder coating of any colour (min thickness of powder coating 50 micron) shall be of following sizes:- Frame : 100 x 44 x 1.80 mm thick with rawal plug Middle lock rail: 100 x 44 x 1.80 mm thick Bottom rail : 100 x 44 x 1.80 mm thick Top rail / Style: 46 x 44 x 1.80 mm thick Glazing beading: 0.70 mm thick Aluminium handle 'D' type: 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever, Aluminium stopper cleat Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed. (ii) Making good floor surface after fixed hydraulic double action floor door spring with matching to existing surface complete all as specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and Labour for 100mm thick Cement concrete type B- 1, 1:2:4 (20mm graded stone aggregate) as in floor finishing the concrerte surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for forming 12mm thick expansion joint filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' complete all as specified and directed.

Supply and Fixing in repairs Steel rolling shutters of 1mm thickness of laths with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, ball bearing, spring and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply and Fixing in repairs of Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Taking down cement/ cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat) complete all as specified and directed.

Material and Labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles laid over cement plaster 10 mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for Complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over and including 2mm thick wall care putty finished even and smooth complete all as specified and directed.

Supply and Fixing 4.8 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fixing Fibre sheet as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, Fan, socket,Geyser or power) complete (fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody for credit (credit for above items should be made as per conditon of material separately) and making good distrubed surfaces of wall/floor/ceiling complete all as specified and directed.

Material and Labour for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including PVC rigid non metallic concealed conduit ISI marked of suitable size including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and also making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire on Modular metal flush box of suitable size and thickness 1.2 mm as per circuit requirement for housing switch ,socket,regulators etc completed all as specified and directed for the following:- ( Note:- Upto 7.5 RM wire consider as point wiring more then that is measured and paid as submain wiring) (ii) The work is to be carried out in workshop bldg at a height upto 9 mtrs (iii) The cost of T&P involved in doing the wiring work is included in the quoted cost. (iv) The contractor has to visit the site and check the site conditions before quoting the tender.

One fan/ light/ bell point controlled by one one way switch.

One ceiling /Exhaust Fan point controlled by one one way switch.

One 3 pin 5 Amps socket outlet on independent board.

One 3 pin socket outlet 5 amps on the same board.

All as per item No 78 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor 1100 V grade, PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 1.5 sqmm 1100 volt grade drawn into PVC Conduit medium grade of suitable size in surface/recess including 1.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface as per the site requirement including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC Conduit medium grade of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface as per the site requirement including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC Conduit of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface as per the site requirement including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Taking down old submain wiring and Material and Labour for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC conduit medium grade of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Taking down old submain wiring and Material and Labour for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC conduit medium grade of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: 1. Four single core cable, earth wire and PVC conduit shall be measured as one length. 2. For three phase supply points near the equipments.

Supply and fix in repairs switch piano type one way 6 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix in repairs switch piano type 16 Amps flush type ,240 volt AC complete all as specified and directed.

Supply and fix in repairs socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed.

Supply and fix in repairs socket outlet 2 in 1, 3/ 5 pin 16 Amps flush type complete all as specified and directed.

Supply and fix in repairs switch socket combination 2 in 1, 3 pin, 5 /16 Amps complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary plastering work and finish with existing wall paint complete all as specified and directed.

Taking down old unserviceable Tube light fitting of any type and Supply and Fixing wall/ceiling mounted LED tube light fitting aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed. Make : Jaquar/Halonix/Philips . Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Supply and fixing LED high efficent LED high bay light fitting of capacity 120W, made of die cast aluminium housing with lens and toughened glass IP 66 , 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Halonix Cat No: HLBLD-ML54-120-CWL-R-P or equivalant in Jaquar/Crompton/Havells/Philips Note :- The rates are inclusive of fixing arrangements (clamps, nut, bolts, washers etc) of the highbay lights at the roofs/celings/surface of the wksp bldg

Supply and fixing in repair LED Flood light fitting of capacity 150W, made of die cast aluminium housing with lens and toughened glass IP 66 , 220V, with system efficacy of 100 lm/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose/junction box complete all as specified and directed. Make: Halonix (Cat No: HLFLD-ML15-150-CWL-R-B)/Jaquar/Crompton/Havells/Philips Note :- The rates are inclusive of fixing arrangements (clamps, nut, bolts, washers etc) of the Flood lights at the roofs/celings/surface of the wksp bldg

Taking down old unserviceable Bldg security light Supply and Fixing fix high efficent LED building security light 30 watt , 230 V , lumen 2000 -3000, PF> 0.9, THD less 10%, made of pressutre cast aluminuim housing with energy efficient power LEDs, lens and with IP 66 protection, including connecting with 1.5 sq mm 3 core flexible copper cable from fitting connector to ceiling rose and fix on wall with GI bracket made of 32/40 mm light grade GI pipe of lenght upto 1.5 mtr length fixed with MS clamps & nut bolts of suitable size complete all as specified and directed. Make Bajaj/Benlo/Havells/Crompton/Halonix.

Supply and fixing wall mounting Air circulator fan of size 450mm sweep complete with blades, rotating type , 230 V, Min air delivery 125 CMM with service value 6.00 BEE Five star rated complete all as specified and directed. Make :- Bajaj(Supreme Plus)/Crompton/Havells

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Ditto as item no 96 but SPN 32 Amps .

Ditto as item no 96 but SPN 40 Amps.

Ditto as item no 96 but TPN 63 Amps.

Supply and Fixing MCCB 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity 100 Amps complete all as specified and directed. Make: L &T /Legrand/Hager.

Taking down unservicable metal box, Supply and Fixing sheet metal enclosures for double door distribution board factory made duly painted 12way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators complete all as specified and directed.

Taking down unservicable metal box & Supply and Fixing sheet metal enclosures for double door distribution board factory made duly painted 8way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators complete all as specified and directed.

Taking down unservicable earthing, Material and Labour for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as specified and directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

Taking down unservicable metal box & Supply and Fixing sheet metal enclosures for double door distribution board factory made duly painted 4way TPN and neutral 440 volts with 200 amps rated bus bar , suitable for fixing MCB /Isolators complete all as specified and directed.

Supply and fix Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB of capacity 32/40 Amps complete all as specified and directed. (For three phase supply to the equipments)

Material and Labour for Cutting existing GI pipe of 50 mm dia for insertion of new tees (50x50x20)mm , branches etc. including necessary excavation work complete all as specified and directed.

Supply & laying pipe galvanised medium grade of 20 mm dia including all fitting ( such as bends, elbows, tees required for reduce size as per site requirment, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc) and fixing complete with clips, wall hooks, wooden plug, or laying in trenches or fixed to wall /floor/roof including cutting screwing complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves with iron wheel head, srewed both ends for iron pipe and fixed for size 20m dia complete all as specified and directed.

All as per item No. 105 above but of size 50mm dia complete all as specified and directed.

Material and labour for construction of brick masonry valve chamber of size, 105cm X 105cm x 105cm (internal) suitable for housing sluice valve/gate valve etc with plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 100mm thick with 150 mm alround offset from external face of wall, brick work in cement motor 1:6, 230 mm thick, rendering 15mm thick in cement motor 1:4, inside complete and outside 150 mm below ground level, coping with plain cement concrete 1:2:4, using 20mm graded stone aggregates, type B-1, including provision of MS sheet cover 3.15 mm thick fixed to MS angle iron frame 40 X 40 X 6 mm embedded in PCC (1:2:4) (20mm graded stone aggregate) concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer, including necessary excavation and earth work in any type of soil complete all as specified and directed.

Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply & fix LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr lenth with necessary bending complete all as specified and directed .

Supply and fixing LED lights fitting 1x 22W, 220V,AC, decorative box type with driver, holder incl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and Fixing MCB DB SPN 4 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

Material and Labour for earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. wire of size 4 mm dia by means of bolts,nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle , 20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed.

Supply and fix Exhaust fan steel body complete with louvers shutter,frame, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 380 mm complete all as specified and directed.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable of size 6 Sqmm 2 core with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve complete all as specified and directed. Make :- Havells / Gloster / Finolex / Polycab

Demolition of precast RCC as in cover slabs complete all as specified and directed.

Material and Labour for Cement concrete Type C2 1:3:6 (40mm graded stone aggregate)in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and directed.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and Fixing MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary, drilling. bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Demolition of brick/PCC solid block masonry built in cement mortar/cement lime mortar complete all as specified and directed.

ShreHari Civil Enginneering and Contractors (BID ID -3314383)