Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 249 LIG PREETAM NAGAR ALLAHABAD UTTAR PRADESH PIN 211011 | ALLAHABAD | ALLAHABAD | UTTAR PRADESH | 211011 | Admitted-Finance |
Tender Value
₹16.3 L
EMD Value
₹32,616
Closing Date
12 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director, TIFR Mumbai
TIFR Mumbai
Repairs to Cascade Hall at TIFR, Colaba Mumbai as per attached documents
2024_DAE_796560_1
TIFR/PD/CF23-89/232533
Open Tender
Civil Works
Works
180 days
TIFR Mumbai
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹32,616
Technical Services Seminar Room
27 Mar 2024
20 Feb 2024
13 Mar 2024
21 Feb 2024
12 Mar 2024
26 Feb 2024
26 Feb 2024
DISMANTLING AND DEMOLITION
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos cement sheet
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,bed concrete for rain water gutters, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing: (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.: With cement mortar 1:4 (1 cement : 4 fine sand)
EXTERNAL PAINTING
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. : New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
INTERNAL PAINTING
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. collecting and disposal of dust at the directed place upto lead of 50 meter. The rates to be inclusive of horizontal and vertiocal movable / adjustable H framed and wheeled with locking arrangement system ) scaffolding .
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( The rates to be incluisve of movable H frame / necessary movable and adjustable ( wheeled) scaffolding with locking arrangement )
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. : With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre . ( The rates to be incluisve of movable H frame / necessary movable and adjustable, wheeled scaffolding with locking arrangement )
Oil based primer for false ceiling : Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.:With ready mixed pink or grey primer on wood work (hard and soft wood) / existing false ceiling having VOC content less than 50 grams/ litre ( The rates to be incluisve of movable H frame / necessary movable and adjustable, wheeled scaffolding with locking arrangement )
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. : Two coats. ( The rates to be incluisve of movable H frame / necessary movable and adjustable, wheeled scaffolding with locking arrangement )
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. ( The rates to be incluisve of movable H frame / necessary movable and adjustable, wheeled scaffolding with locking arrangement )
For cascade hall ceiling : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. ( The rates to be incluisve of movable H frame / necessary movable and adjustable ( wheeled) scaffolding with locking arrangement )
Painting with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. ( The rates to be incluisve of movable H frame / necessary movable and adjustable ( wheeled) scaffolding with locking arrangement )
Painting with aluminium paint of approved brand and manufacture to give an even shade . : Two or more coats on new work. .( The rates to be incluisve of movable H frame / necessary movable and adjustable ( wheeled) scaffolding with locking arrangement )
SCAFFOLDING
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer In - charge .The elevational area of the scaffolding shall be measured for payment purpose .This item for the said quantity ( 100 sq.m) and for all the respective and relevent repairs and cleaning items will be executed through out the project duration as per the descretion of EIC. Contractor has to make himself aquainted with site condition.
STRUCTURAL REPAIRS
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge : 25mm average thickness
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. : SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). : 25 mm average thickness in 2 layers.
STRUCTURAL STEEL WORK
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
FINISHING
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. : With cement mortar 1:4 (1 cement : 4 fine sand)
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
EXPANSION JOINT
Removing the existing materials for the expansion joint, providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing depth per compound Grade-A in expansion joints
Providing and fixing sheet covering over expansion joints with iron screws as per design.: Aluminium fluted strips 3.15 mm thick. : 150 mm wide
STONE CLEANING AND JOINT SEALING
Removing the lossened existing sealent with sharp edge , providing , supplying and sealing the joints in kotah stone / red sand stone with gun grade polysulphise sealent of required grade so as to match with the existing stone color etc. including all materials, labor and making arrangement for all installtions needed & using safety appratus applicable including, using spider-man method ( spider kit jhulla ) etc. all complete as per the direction of the Engineer-in-charge.
Cleaning the Kotah stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with 3% solution of Teepal and liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineerin-charge. The rates to be including all materials, labor and making arrangement for all installtions needed & using safety appratus applicable including, using spider-man method ( spider kit jhulla ) etc. all complete as per the direction of the Engineer-in-charge.
ROOFING
Providing and fixing precoated Galvalume profile sheets with superior corrosion-resistance, lower sun absorption, ability to decreases the Peak Roof Temperature by 3-5 Degrees (of size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) thk. confirming to IS 15965 with a system of substrate with Al - Zn , coil form coating mass of 70-200 GSM ,Hardness (HRB) 55 - 65 Soft CQ, Above 85 for grade 80, Guard film Film - optional (microns) 50μ (Customised also) ASTMA A 755, EN 10169, IS 15965 and should be of single ribbed trapizoidal profile structure. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping stainless steel screws of size (5.5x 55 mm) with EPDM seal / Satinless steel J hook for required depth, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated Galvalume sheet roofing accessories 0.60 mm (+0.05 %) total coated thickness, Zinc coating 150 grams per sqm , in 550 MPA and AZ 150 ( to be made from sheet of size 3500 mm X 1220 mm ) using self drilling/ self tapping screws complete :Gutter (900 mm to 1050 mm over all girth as per site)
Providing and fixing cover to the existing drain with stainless steel wire mesh with apreture 25 mmX 25 mm and 1.0 mm thk. for covering the gutter and to prevent intrusion of pegions / birds / trapping the tree leaves etc. completed as directed.
Removing the existing loose materials, providng and filling existing expansion joint with polysulphide sealent for 35mmX 15 mm size of approved quality and required grade and as per manufacturers specification etc. completed as directed .( The rates of this item to be varied as per actual joint filling and consumption of materials at site)
Providing and covering the existing instrument set up with LDPE covering plastic of desired quality / thickness upto the completion of internal painting works and removal of the same after completion of work etc completed as directed. ( note : The same plastic to be reused for other purpose. the payment will be given for the said fixed qty of 250 kgs / as procured and deliveverd at site.)
Making connection with appropriate joint filling materials for connecting the existing UPVC rain water pipe with new Galvelium gutter so as to make joint water tight and with the aid of suitable catch rainwater fit system / rainfit plumbing system and appropriate silicon selanet / joint sealent to aid joint between gutter and rain water pipe ( water tight) etc. completed as directed
Providing and fixing double scaffolding system (H-frame type) on the exterior side of the building made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with MS cross angles, M.S. tube challies in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
PART 'B" Any unforeseen item not covered above, executed from CPWD Delhi Schedule of Rates 2021 upto a base value of Rs. 1,63,000/- Hint: Bidder is supposed to quote rate for this item in column (green) at value which is at a certain percentage above or below the rate of DSR 2021. For e.g. if the estimated rate is Rs. 1,63,000/- then bidder should quote rate of Rs. 1,79,300/- in case he intends item in this part to be paid at the rate of 10% above DSR 2021 or Rs. 1,46,700/- in case he intends item in this part to be paid 10% below the DSR 2021. The value given in the rate for this item shall be used to derive the rate to be paid for the item from DSR 2021
S K Chinnaswamy
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .