PROVN OF TOUGHENED GLASS PARTITION ALONG WITH FITTINGS AND OTHER B/R MINOR WORKS AT ICGAS RATNAGIRI

Amount

M & L for 18mm thick Plywood, grade BWR type BB having minimum 7 Nos of ply, fixed with screws to timber frame work etc.

M & L for 12mm thick Plywood, grade BWR type BB having minimum 7 Nos of ply fixed with screws to timber frame work etc.

M & L for 09mm thick Plywood, grade BWR type BB having minimum 5 Nos of ply, fixed with screws to timber frame work etc.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.

M&L for 15mm thick Toughned glass as in hinged working cabinets for office, doors, partitions, automatic doors and similar work including cutting to shape, drilling holes and securing glass with SS clamps and screws to the wooden frames/plywoods including making smooth finishes to the edges exposed etc as required.

M&L for 12mm thick Toughned glass as in hinged doors, partitions, automatic doors, fix in position of any description and any position and similar work having embossment of approved logo's, designs, borders with standard colours through chemical colour etching, balance portion of doors having no opacity through chemical etching including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc. complete all as specified and as directed.

M&L for 12mm thick Toughned glass as in hinged doors, partitions, automatic doors and similar work having embossment of approved designs/borders without colours through chemical etching including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc. complete all as specified and as directed.

M & L for SS grade 304 button Studs/Standoffs/Fastener heavy duty of dia 25mm and above to hold the toughened glass panels in position along walls in doors/partitions including securing glass with necessary screws, silicone gasket to tighten it and welding if required etc. complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., ncluding welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc. complete all as specified and as directed.

M&L for 10mm thick Toughned glass as in SS railing, hinged doors, partitions, automatic doors and similar work with approved logo's/designs (As approved by Engr-in-charge) embossed with standard colours through chemical colour etching the balance portion of the glass having complete opacity including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc . complete all as specified and as directed.

M & L for SS grade 304 D Brackets of any size and any description to hold the toughened glass panels in position along walls in doors/partitions including securing glass with necessary screws, silicone gasket to tighten it and welding if required etc. complete all as specified and as directed.

S & F of SS 304 grade mirror/matt prepolished, rectangular/L type patch fittings suitable for 12mm thick toughened glass doors/panels at hinged portion including drilling holes and securing glass with necessary clamps, screws, silicone gasket etc. complete all as specified and as directed. Note: Make of Godrej, Ozone or its equivalent with ISI approved fittings.

M&L Plain fillets of 2nd class hard wood area not exc 3 Sq cm for cubboard, wardrobe & door, including clean, sawn, res-ecured with nails or- brads.

M&L Plain fillets of 2nd class hard wood area exc 3 sq cm but not exc 6 Sq cm for cubboard, wardrobe & door, including clean, sawn, res-ecured with nails or- brads.

M & L varnishing of plain fillets, not exc 10 cm in width or girth when unconnected with other work or painted in different tint with one coat of wood file with two coats of synthetic varnish.

S & F Modular lock grade-I 50mm 02 lever as in modular wooden cupboard and modern wardrobes.

S & F telescopic hinges 450mm for computer keyboard shelves and drawers for opening/closing as in modular wooden study table/workspace

S & F SS auto closing concealed hinges for snap on attachment 9.5mm and above crank for half overlay door/shutters suitable to modular cupboards with 95 degree opening angles, 14-32mm zinc coated complete all as specified

M & L for Brass handles, cast type, polished bright 150 mm suitable to modular cupboards long all as specified and directed

M & L for demolition of brickwork, laterite stone, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for Machine cut Laterite stone masonry exc 10 cm in width square rubble, regular coursed, well bonded, bedded and solidity hearted ,built in cement mortar 1:6 of all as specified and directed.

Use and waste of formwork to sides and soffit of chajja etc flat for rough finished surfaces of concrete

M & L for RCC 1:1.5:3 (M-20) type B1 (using 20mm graded stone aggragate) as in chajjas ,etc all as specified and directed.in chajja complete all as directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M & L for mild steel TMT bars of 6 to 8mm dia or as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M & L for 100 mm thick Cement concrete 1:1.5:3 (M-20) typr B-1 (using 20 mm graded aggregate) for floor finishing complete all as specified & as directed.

Taking down cement plaster any description on on Laterite masonry or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.etc.all as specified and directed.

M&L rendering 10mm thick on Laterite stone masonry surfaces or surface other than fair face of Laterite stone or on one side of lathingwith CM (1:6) finished even and smooth with out using extra cement all as specified and directed.

M&L rendering 15mm thick in two layers, 5mm thick using WPC @3% by wt of cement over 10 mm thick on fair faces of Laterite stone masonry or concrete Note :- WPC will be measured and paid separately.surfaces with CM (1:4) finished even and smooth with out using extra cement.Note :- WPC will be measured and paid separately.

Supply only integral water proofing compound conforming to IS 2645-1975, IS -9103 all as specified and directed.

M&L for preparation of newly plastered surface on walls and applying two coats of plastic emulsion paint over two coats of internal wall care putty complete all as specified and as directed.

M&L for new surface of walls two coat of acrylic antifungal paint on walls alongwith suitable pigment for colour including preparation of old surface including sealing the cracks all as specified and directed.

M&L for old surface of walls one coat of acrylic antifungal paint on walls alongwith suitable pigment for colour including preparation of old surface including sealing the cracks all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

M&L Double charged vetrified Ceramic tiles light shade for floor finish 10mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc. laid over 10mm thick back coat in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed.

M&L Double charged vetrified Ceramic tiles light shade for floor finish 10mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc. laid over 10mm thick back coat in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed.

Granite of 20mm thick (any type )of work (table rubbed and polished) in steps , jambs , pillars , window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1 :2) using marble dust with admixture of pigment to match with shade of granite.over 20mm screed bed 1:4 all as specified.

M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc directed.

S & F of Aluminium composite panel (ACP) AL 33D havnig 3-4mm thick sheet panel with 0.3mm aluminium coil thickness aluminium alloy AA3105 of approved texture and colour by Engr-in-charge for exterior applications such as wall claddings, sign board fixed on MS/SS frame work by riveting/screwing or with bolts and nuts at 300mm c/c including filling the joints of each panel with silicone gel to match the colour of ACP panels for superior fininsh all along the periphery all as specified and as directed. Note :- If any hole or any other work carried in the cladding there on, the same will be furnished in the proper manner to match the surroundings is included in the quoted rates.

S&F of Aluminium composite profile section to fix the toughened glass panels along walls in doors/windows including drilling holes and securing glass with necessary clamps, screws, silicone gasket etc. complete all as specified and as directed.

M & L for SS grade 304 top pivot to hold the toughened glass panels in position in doors/partitions including securing glass with necessary screws, silicone gasket to tighten it etc. complete all as specified and as directed. Note: Make of Godrej, Ozone or its equivalent with ISI approved fittings.

S & F anodised aluminium powder coating (minimum thickness of powder coating 50micron) frame for doors windows,ventilators and partition section with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coating window and ventilator shutters,fixed /sliding type without sash bars, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed

M&L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty in squares, exceeding 0.5 Sqm in each pane all as specified and directed.

S&F frosted film on glass , pattern as approved, fixed with glass as per instructions all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised

S/F 125 mm Aluminium handles, cast type, anodised all fitting fixture etc complete.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm all soecified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F SS 304 grade pull handle H type of size 22x300mm along with rubber gasket to fix on outdoor 12mm toughened glass doors complete all as specified and as directed. Note: Make of Godrej, Ozone or its equivalent with ISI approved fittings.

S&F SS 304 grade Toughened glass door lock with strike box suitable for 12mm thick glass having base material alluminium alloy and cover made of SS304 grade including fixing to the glass doors.etc complete all as specified and as directed. Note: Make of Godrej, Ozone or its equivalent with ISI approved fittings.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 incl painting one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication all as specified.

M&L for MS plates Fe 410 Gd E250 quality A in roof trusses (framed) trussed, etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed.

S & F of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre. complete all as specified and as directed.

S & F of Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions over Aluminium/GI frame workk (Aluminium/GI frame workk or II class soft wood fillets shall be paid separately) complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description over 10cm in girth not otherwise described complete all as specified and as directed.

Excavation in Post holes each , not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm , watering, and removing surplus soil to a dist n. exc 50 m and making good surface in any type of soil.

Removing excavated materials to a distance n.exceeding 50m and depositing where directed at a level n.exceeding 1.5 m above the starting point in rocks including spreading in low laying area and leveling all as specified.

M&L, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M&L for providing PCC 1:4:8 type D2 using 40mm graded stone agregate in foundation all as specified and directed.

M&L for transperant/coloured/ multicoloured FRP corrugated/ Plain of 2.0mm thick Sheet having tensile strength of 220Mpa as in roof covering and similer works including fixing with J or L hooks complete all as directed.

Surface dressing n.exc averaging 15 cm deep getting out in soft/ loose soil complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engi neer-In-Charge

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc of approved make complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

m/s Pravin s Bhosale (BID ID -3140774)

Advait Enterprises (BID ID -3140746)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3140704)

M/S jvsr constructions (BID ID -3141014)

LAXMI ENTERPRISES (BID ID -3141235)

Ideal Infrastructure and Consultants (BID ID -3140958)

M/S. G G NAIDU (BID ID -3141054)