Repair to Water proofing treatment and Certain Repairs to Security fencing, chain link fencing and misc repair of AGE BR-I UNDER GE NAGROTA.

Amount

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying TWO coat of cement base paint on walls. after filling any hole with putty complete all as spd.

Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care puttyover a coat of chalk whitening preparatory to distempering on walls etc all as specified .

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash .

Demolition of ground floors and paving n exc 15 cm thickness(below or above ground floor)

M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in treatment to sunken floor including water proofing compound @2% of cement complete all as specified and as directed.Note:- WPC Mesured and Paid Separately.

M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

M & L Rendering 10 mm thick in cement mortar (1:3) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase and pavings etc all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc all as specified.

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor .

Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr

Dismantling water tank and removing to stores exc250ltr n.exc 500ltr

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

S&F in repair seat cover for peddastel patern

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.

M&L Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe15mm bore (as union, tee, socket, nipple, elbow) complete all as specified and directed

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

M&L Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe20mm bore (as union, tee, socket, nipple, elbow) complete all as specified and directed

M & L Udaipur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plate form of size not less than 2 m in length, incl over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and as directed.

S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gm.

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F vitreous china wash basin white of size 550x400mm incl waste coupling bracket and PVC waste pipe incl taking down old and as specified and as directed.

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe .

S&F in repair PVC valves less syphonic action type low level flushing cistern 10 ltr capacity with inlet ball valve, brackets all as specified.

S&F in repair PVC valves less syphonic action type low level flushing cistern 15 ltr capacity with inlet ball valve, brackets all as specified.

S & F in repair stop/ angle valve valve15mm bore cast copper alloy fancy type chromonium plated , cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe.

S & F in repair 15 mm bore Brass CP Non Telephonic mixer for mixing hot & cold water screwed down for iron pipe

S & F in repair 15 mm bore Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs.

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved.

S&F in repair Glass corner Shelf of 300mm long as specified and directed by Engr-in-Charge

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 75 mm bore PVC (SWR) bends any radius.

M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions NOTE :1. Laying of membrane shall be done through approved manufacturer. 2. Pond test shall be done to check seepage in presence of GE. 3. Digital proof shall be produced at the time of payment.

Applying one coat of aluminium paint on top of APP membrane.

S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr. Note :-Certificate from user on this account shall be obtained and produced at the time of Payment

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr. Note :-Certificate from user on this account shall be obtained and produced at the time of Payment

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from cement concrete and making good disturbed ground complete all as specifed

Excavation for post holes (or in similar hole ) each n.exc 0.50 Cum including dismantling PCC including disposal of surplus n.exc 50m all as specifed and directed by Engineer -in- Charge.

M&L for PCC 1:3:6 type C-2 (20mm graded aggts) in foundation filling and mass concrete all as specified and directed

M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed etc complete all as specifed

Fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete.

Supply only Chain link fencing with or without line wires,any type and mesh size and any type of standards and dia of wire ( as directed by Engineer-in-charge) fixed with rails, staining bolts etc including provision of binding wire including dismantling existing unserviceable fencing all as specifed and directed.( rails, staining bolts will be measured in seperate Item)

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia of shank complete all as specified and directed

S&F, TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.

S&F mild steel conforming to Fe-290 Gde E-165 in Hand rails,haif round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars,for doors,balusters,nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, Angle iron post and struts in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surface exc 10 cm width or girth and applying two coat of synthetic enamel paint on steel surfaces over a coat of red oxide all as specified and directed by Engr-in-Charge

M & L brick work with subclass ‘B’ bricks using old size straight on plan exc 6m mean radius built in cement mortar 1:6 as directed

All as per item 76 above but except bricks

M & L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete as specified and directed

Preparing old plastered surfaces of wall and applying one coat of cement based paint all as specified .

M&L PCC 1:2:4 Type B1 (using 20mm graded) as in copping, bed plates etc complete all as specified.

M&L for providing precast cement concrete (type B0 1:2:4 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and form work including demlation of old louvres and jallies complete all as specified and directed.

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete

Ornamental and intricated design frame work in steel gate complete drilled welding for fixing of steel sheeting or other covering, hooks hinges or steel hanging doors fittings also fastening and fixing complete as directly in Eng-in-Charge.

Dismantling of Barbed wire in fencing of any description all as specifed

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.,(each line wire to be measured separatley) complete all as specified. as directed.

Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured separatley) complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified.

S&F Concertina coil galvanished streach of 8m having 60cm dia including securing tying at 20cm centre to centre crossing with and provision of galvanished mild steel wire staples or steel pins etc all as directed including dismantiling of existing concertina coil wire

Taking down and refixing of angle iron gate ( 3mtr to 5 mtr wide and 2 mtr to 2.5 mtr high) including embedding of pintel hinges in concrete blocks and fixing locking arrangement, complete all as specified and as directed by the Engr-in-Charge.

J S ENGINEERS

R.K. Works

U K Engineering Works

ASHOKA ENGINEERS AND BUILDERS

M/S Shankardass Devidass

Nitika electricals and engineers works

ASHWANI KUMAR KHAJURIA AND SONS