REPAIR MAINT TO ALL TYPE OF HOSPITAL FURNITURE UNDER GE WEST LUCKNOW

Amount

COUCH EXAMINATION DRG NO FD-122: (For Item No 1 to 8 ) Taking out old unserviceable Rexene cloth, Hessian cloth, Dunlop foam, coir fibre/cotton layers for side and lower planks and Supply and fixing new Rexine cloth, Hessian cloth, coir fibre and 12 mm thick cotton layer and 25 mm thick Dunlop Pillo of 32 density and covered with UPHOLSTRY (Leatherite) cloth complete with and including replacement of damaged spring and damaged planks of 1st class teak wood where ever required complete all as specified and as shown on drgs. Note : Wooden plank and spring shall be measured and paid separetely as supply only. Make of foam : Sleep Well/ Kurlon

Supply only planks 1 st class teak wood 12 mm thick complete all as specified and as shown on drgs.

Supply only spring required for Couch Examination complete all as specified and as shown on drgs.

Taking down old unserviceable leg and Supply and fixing new leg of MS Square pipe 25 mm having 1.6mm wall thickness duly painted with two coat of synthetic enamel paint over a coat of red oxcide primer of any tint including necessary welding to stiffners complete all as specified and as shown on drgs.

All as item ser No. 4 but centre stiffner of size 25mm square tube steel including welding to leg complete all as specified and rest all as per drg.

All as item ser No 4 but side stiffner of size 25mm square tube steel including welding to leg complete all as specified and rest all as per drg.

Taking down old damaged/ broken hard rubber shoe and Supply and fixing new hard rubber shoe of approved quality complete all as specified and as shown on drawing.

Taking out old unserviceable drawers and supply and fixing new drawers complete with knob as per existing size and shape after de-rusting , preparation , denting of deshaped portion and painting with two coats of synthetic enamel OG paint complete all as specified and as shown on drg .

DESK SCHOOL TYPE 'A' DESK ADULT, DESK 4X6 :DRG NO FD-107& 124: (For Items No 9 to 18) Taking down U/S 19 mm thick back plank of box and S&F 19MM Plank made 1st class hard wood teak (MP teak) free from knoss, cracks etc. with permissible moisture contents as per the shape and size as exists complete all as specified and as shown drg.

All as per items No 9 but side plank of size 19mm thick 370 x 140mm complete all as specified and as shown on drg .

All as per items No 9 but Top/Bottom plank of size 19mm thick 365 x 800 mm complete all as specified and as shown on drg .

Taking down U/S legs and supply and fixing legs of 25mm tube legs size as exists complete all as specified and as shown drg and painted with two coats of synthetic enamel paint over a coat of red oxide primer.

All as per items No 12 but foot rest of size 25mm square tube steel complete all as specified and as shown on drg

Taking down old U/S rubber shoe and S/F new hard rubber shoe complete rest as per drg complete as per the shape and size as exists complete all as specified and as on shown drg.

Taking out existing unserviceable block board from Desk school and provide new block board of size 800x455x19 mm thick and screwed to fix complete all as per drg. Make: Centryply, Greenply, Archidply

Taking out unserviceable sides of block board from Desk school and supply & fix new sides of block board of size 380 x 140 x 19 mm thick complete rest all as per drg. Make: Centryply, Greenply, Archidply

Taking out unserviceable partition from Desk school & S&F in partition made out of block board of size 370x120x19 mm thick complete all as specified and as shown on drg .

Removal of denting of deshaped portion desk fram and panting with two coats of synthetic enamel olive green paint complete all as specified and as shown drg. Make of paint :- Berger/Asian/Shalimar

RACK PIGEON HOLES (STEEL)/ALMIRAH PIGEON HOLES: DRG NO FD-1037 (For Items No 19 to 23) Taking down 1mm thick MS Sheet from any portion of rack Pigeon Hole steel and SF new 1MM thick MS Sheet as per the shape and size as exists for LHS and RHS of Pigeon hole steel and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out existing damaged MS sheet from Top of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out existing damaged MS sheet from back of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down U/S legs of Angle Iron and S/F new leg made out angle iron 40X40X4MM thick Angle iron welded to 1mm thick M/S sheet all as specified and as shown drg and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Removal of denting for the deshaped portion of rack pigen holes (steel) cleaning of rusted surface with including parts/item repaired/replaced under item 19 to 22 above including preparation of patched by applying putty over two coats of paint grey/olive green systhetic enamed on the external surfaces by spray gun complete all as specified and as shown on drg. Make of paint :- Berger/Asian/Shalimar

RACK 3 TIER: DRG NO FD-1039 (For Items No 24 to 29) Taking out US shelves and S&F new shelves made of 20 gauge thick MS sheet of existing size as per drawing duly painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S leg and S&F new leg of required size as shown on drg duly painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out US side sheet and S&F new side sheet made of 20 gauge MS plain sheet of size as shown on drawing duly painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out US top of rack sheet and S&F new top of rack sheet made out of 20 gauge MS plain sheet of size as shown on drawing complete with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out Us back side of rack sheet and S&F new back side of rack sheet made out of 20 gauge MS plain sheet of size as shown on drawing complete with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Removal of denting for the deshaped portion of rack side (Steel) cleaning of rusted surface with including parts/item repaired/replaced under item 24 to 28 above including preparation of patched by applying putty to coats of paint grey/olive green systhetic enamed on the external surfaces by spray gun over a coat of primer complete all as specified and as shown on drg. Make of paint :- Berger/Asian/Shalimar

RACK 6 TIER : DRG NO FD-1038: (For Items No30 to 35) S&F new shelves made out of 20 gauge thick MS sheet of existing size as per drawing duly painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

Taking out existing damaged MS sheet from Top of rack steel and supply and fixing new 1 mm thick MS steet duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out existing damaged MS sheet from back of rack steel and supply and fixing new 1 mm thick MS steet duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S leg and S&F new leg made out of 40x40x4 mm angle iron of required size and shown on drg duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out US sheet from LHS or RHS of rack 6 tier and S&F new side sheet made of 20 gauge MS plain sheet of size with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Removal of denting for the deshaped portion of rack side (Steel) cleaning of rusted surface with including parts/item repaired/replaced under item 30 to 34 above including preparation of patched by applying putty two coats and painted with grey/olive green systhetic enamed on the external surfaces by spray gun complete all as specified and as shown on drg. Make of paint :- Berger/Asian/Shalimar

SCREEN MOVEABLE TUBULAR STEEL WITH CLOTH: DRG NO FD-83 (For Items No 36 to 41) Taking out old caster wheel and S&F new caster wheel 50mm dia complete as shown in drg.

Taking out old U/S legs and S&F new legs of 25 mm dia MS tube complete as shown in drg and as directed at site (Appx length 0.25 meter welded with 25 mm dia MS tube pipe complete with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old U/S 2.15 m long bottom rail and S&F bottom rail of 25 mm tube complete as shown in drg complete with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old Hook and S&F new GI Hook complete as shown in drg and as directed.

Taking down old U/S cloth and S&F new curtain cloth green colour of approved quality duly stitched at both rails and comprising 03 Nos in a set of size 136 x 111cm one number and 136 x 54 cm two Nos with cloth hanging spring complete as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and a coat of red oxide primer wherever equired and applying two coat of synthetic enamel paint white as required shed by spray gun on all steel surfaces complete as directed . Make of paint :- Berger/Asian/Shalimar

STOOL STEEL 305X305X510 MM (For Items No 42 to 45) Taking out old rusted legs and S&F new legs made of 16 gauge MS sheet painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old rusted stiffeners and S&F new stiffeners made of 16 gauge MS sheet complete as per drg and as directed at site with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old unserviceable top and S&F new top 16 gauge MS sheet size and shape as per drg and applying with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

M&L denting of deshaped portion, derusting, cleaning of rusted surfaces including preparation of patches by applying putty etc wherever required and applying two coats of olive green synthetic enamel paint by spray gun on internal & external surfaces complete all as specified and shown on drg. Make of paint :- Berger/Asian/Shalimar

TABLE BED SIDE STEEL : DRG NO FD-2005/FD-133(M) & TP Godrej (For Items No 46 to 55) M&L denting of deshaped portion, derusting and cleaning of rusted surface and sand papering inside and outside including preparation of patches by applying putty and a coat of red oxide primer and applying two coats of synthetic enamel paint white with spray gun all as specified and shown on drg. Make of paint :- Berger/Asian/Shalimar

Taking out worn out legs and S&F new legs made of 25 mm dia 1.6 mm thick MS tube 150 mm long and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old worn out long rail and S&F new long rail made of 20 mm dia and 1.6 mm thick MS tube 500 mm long and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking out old worn out short rail and S&F new short rail made of 20 mm dia and 1.6 mm thick MS tube 300 mm long and painted with one coat of red oxide Primer complete all as specified and as shown on drg.

Taking out unserviceable handle and S&F new mild steel chromium plated handle of as shown in drg.

Taking out old unserviceable hinges and S&F new hinges as per existing table bed side steel complete as directed.

Taking out unserviceable top and S&F new top of size 600x380 made of premlaminated particle board 18/19mm thick exterior grade both side laminated one side teak face other side balancing white bonded with BWP type phenol formaldehyde synthetic resin as per IS-12823 ISI marked and around with 6mm teak wood beading all around top and fitted with steel screw to frame of steel table complete all as specified and as shown on Drg. Make of board : Centuryply, Greenply, Archidply.

Taking out unserviceable top and S&F new steel top made of 20 gauge thick plain MS sheet duly painted with white synthetic enamel paint over a coat of red oxide to match with existing surface complete all as specified and shown on drg.

Taking out unserviceable shutter and S&F new shutter made of 20 gauge thick plain MS sheet duly painted with white synthetic enamel paint over a coat of red oxide to match with existing surface compelete all as specified and shown on drg.

Taking down and U/S hard rubber shoe and S&F new hard rubber shoe all as specified and shown on drg.

STEP STEEL (2&3 TIERS)DRG NO FD-13 (For Items No 56 to 60) Taking ot old U/S sheet from step and S&F new sheet made out of 18 gauge MS sheet of size 460x230mm with size & shape as exists and welded with frame and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S back legs and S/F new back side legs of 18 gauge 22.5 dia tube shape as exists and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

All as per item No 57 above but front side leg of hight not more than 150 mm.

Taking down old U/S coster and S/F coster wheel without rubber for front legs only exists complete all as specified and as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surface and sand papering inside and outside including preparation of patches by applying putty and applying two coats of synthetic enamel paint white with spray gun complete all as specified and shown on drg. Make of paint :- Berger/ Asian/ Shalimar

TABLE INVALID DRG NO FD-131(For Items No 61 to 64) Taking down old U/S stanless steel top and S/F 18 gauge stanless steel size 1070x 460 shape as exists duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S legs and S/F new legs made of 25mm dia 20 gauge steel tube shape and size as exists duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S ball bearing and S&F 50mm dia ball bearing all as specified and as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and and applying two coat of synthetic enamel paint white by spray gun on all steel surfaces over a coat of red oxide complete specified and shown on drg. Make of paint :- Berger/ Asian/ Shalimar

TROLLEY HOT FOOD: DRG NO FD-133 (For Items No 65 to 69) Element and S/F new tubular Element Voltage 1250 volts 230/AC DC all as specified and as shown on drg.

Taking down old U/S rotary switch and S/F multistage rotary switch for heat control all as specified and as shown on drg.

Taking down old glass wool and S/F new glass wool on heating chamber all as shape shown as specified drg.

Taking down old U/S stainless steel food vessal and S/F new stanless steel food vessal of 200mm dia, wide and 200 mm deep with lead setting wide all as shown on specified and as shown on drg.

Taking down old U/S ball bearing and S/F heavy duty ball bearing type 200 dia rubber wheel collapseable counter 390x500 mm complete all as specified and as shown on drg.

TROLLY SOILED LINEN SIGNLE AND DOUBLE UNIT. DRG NO FD-132 (For Items No 70 to 75) Taking down old U/S canvas bag and S/F canvas bag as per size and shape exists complete as on shown and as specified on drg.

Taking down old U/S bottom frame and S/F new bottom frame made out of 19mm circular tube bottom frame complete all asspecified and shown on drg duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S legs and S/F new legs made out of 19mm circular tube legs complete all as specified and shown on drg duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S stiffner and S/F new stiffner made out of 19 mm tube stiffner and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old U/S castor wheel and S/F new 50 dia castor wheel complete all as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc and two coat of synthetic enamel paint white and as required shed by spray gun on all steel surfaces complete all as specified and shown on drawing. Make of paint :- Berger/ Asian/ Shalimar

PATIENT TROLLY STRUCTURE (TP) (For Items No 76 to 78) Taking down old U/S stainless steel stretcher top and S/F 1mm stainless steel top design complete all as specifed and as shown on drg.

Taking down side U/S ball bearing and S/F heavy duty ball bearing 75 dia rubber wheel callapsable complete all as specified and as shown on drg.

M&L denting of deshaped portion, derusting and cleaning of rusted surfaces by including preparation of patches by applying putty etc wherever required and applying two coat of synthetic enamel paint white as required shed by spray gun complete all as specified and shown on drawing. Make of paint :- Berger/ Asian/ Shalimar

TABLE LABORATORY:FD-140 (For Items No 79 to 87) Taking out Stainless steel sheet from top of table and S/F new Stainless steel sheet top as per existing shape and size complete all as specified and as show drg of size 3'x12'x 1mm thick.

Taking down old U/S block board and S/F 19mm thick block board of size 3'x12' BWR grade ISI Mark 303-1885 with shape and size complete all as specified and as shown on drg. Make: Kitply/Greenply/ Archidply

Taking down old U/S front drawer and S/F new front drawer made out of block board with teak veneer one side and block board requred for one drawer 370x260mm complete with size and shape exists all as complete as on specified as on shown on drg.

Taking down old U/S shutter and S/F new shutter with size and shape exists complete as on specified and shown on drg .

Taking down old U/S top rail and S/F top rail of size 660x50x25mm made of 1st class hard wood teak (MP) free form knots craks etc. with permissible moisture contents complete all as specified and shown on drg.

All as above but item No. 83 stiffner of size 800x50x25mm. Complete all as specified and shown on drg.

All as above but item No. 83 legs size 100x50x50mm. Complete all as specified and shown on drg.

All as above but item No. 83 side stiffer 760x50x25mm. Complete all as specified and shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of French polishing to table laboratory, with and including to the parts repaired/replaced under item No. 79 to 86 to the required gloss to match with the existing complete all as specified and as shown on drgs. Make of paint :- Berger/ Asian/ Shalimar

TABLE PREPARATORY SS TOP DRG NO :TP (For Items No 88 to 91) Taking down old U/S stailess steel top and S/F 1mm thick stainles steel top of table preparatory with size and shape exists all as complete as on specified as on show on drg.

Taking down old U/S Legs and S/F 25mm tube legs with shape and size as per drawing and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

Taking down old U/S top frame and S/F 25mm tube frame with shape and size as per drawing and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

Denting for the deshaped portion of table preparatory cleaning of rusted surface with including parts/items repaired/replaced under item No 88 to 90 above including preparation of patches by applying putty two and painting with two coats of synthetic enamel paint white on the table preparatory frame by spray painting complete all as specified and as shown on drg. Make of paint :- Berger/ Asian/ Shalimar

THREE SEATED STEEL CHAIR POWDER COATED(TP) (For Items No 92 to 93) Taking down old U/S sheet from chair and S/F new sheet of steel chair made out of MS Sheet as per drawing and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

Taking down old U/S legs and S/F new legs for three seater steel chair powder coated MS sheet as per drawing and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

LOCKER BED SIDE STEEL : DRG NO FD-257 & 1029 (For Items NO 94 to 101) Taking down /out old unserviceable handle and Supply and fixing new chromium plated handle godrej pattern, 100mm long complete all as specified and as shown on drg .

Taking out old unserviceable lock and Supply and fixing brass lock 6 lever Godrej pattern complete all as specified and as shown on drg. Make: Godrej/ Harrison

Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple, 100mm size complete all as specified and as shown on drg .

Taking down /out old worn out legs and Supply and fixing new leg made out of 16 gauge MS sheet with size & shape as per drawing complete all as specified and as shown on drg and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking down /out old U/S drawer and Supply and fixing of drawer made of 16 gauge MS sheet with size & shape as per drawing and painted with one coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick with size & shape as per drawing and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable door shutter of locker bed side steel and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Removal of denting of the deshaped portion of locker steel, cleaning of rusted surfaces with & including parts/item repaired/replaced under item No 97 to 100 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green synthetic enamel on the surfaces by spray gun except item replaced under item No. 97 to 100 complete all as specified and as shown on drg . Make of paint :- Berger/ Asian/ Shalimar

ALMIRAH STEEL LARGE / MEDIUM WITH SHELF , 1/2 HANGING 1/2 SHELVES /ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEEL: DRG NO FD- 1031,1032,1033 &1030(For Items No 102 to 113) Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long Godrej Pattern complete all as specified and as shown on drg . Make : Godrej/ Harrison

Taking down/ out old unserviceable lock and Supply and fixing new 6 lever of brass lock godrej pattern complete all as specified and as shown on drg .

Taking down old shelves with cleats incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position after repair complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new new lock cover made of 16 gauge MS sheet and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg .

Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable door shutter of Almirah Large and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Taking down/out old unserviceable door shutter of Almirah Small/Med and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size as pe drawing and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg .

Removal of denting for the deshaped portion of almirah large, almirah 1/2 Hanging 1/2 Shelf & Almirah glazed/steel, cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 104 to 110 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green synthetic enamel on the internal surfaces and hammer tex /Olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg. Make of paint :- Berger/ Asian/ Shalimar

All as per serial item No 111 above but Almirah small/medium with shelves.

Taking down old unserviceable glass panes of almirah glazed steel and Supply and fixing glass panes of 5 mm thick of size as exists complete all as specified and as shown on drg .

m/s tripurari enterprises

M/s Laxmi Enterprises

M/S Pramod Chandra Jain