NIT No.10 / EE(PROJECT)W-VI (2025-26)

S/o submersible pump set with submersible motor working on 415V,3Phase,50 HZ AC supply, 7.5 HP having minimum Discharge 400 LPM at 40 Mtr head. Make: BS/SU/KSB/any other make approved by DJB.

S/o submersible flat cable with copper conductor having three core sizes 4.0 Sq. mm Make:-Havells or any other make approved by DJB.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete like below items:- 1. G.I tail piece of 80 mm dia. , one mtr. 1 mtr Long size made out of medium class pipe complete with one end threaded and other end fitted with G.I. flange heavy and cut for submersible cable. 2. GI gap piece assembly of 80 mm dia, 1 mtr long with complete accessories as required as site etc. 3. MS clamp of 450 mm long 12mm thick complete with nut and bolts and washers for holding the 80mm dia pipe including bending and shaping etc. as required. 4.Supply of MS bore cover 4 mm thick suitable for bore size 400mm/350mm/as per site requirement in 2 pieces complete with bolting arrangement angle iron frame and provision of 80mm dia hole in the center.

S/o NRV 80mm dia CI double flanges PN1.0 Make:-Kirloskar /IVC/DJB

S/o CI sluice valve , non rising spindle, D/F P.N 1.0 of size 80mm Make:- Kirloskar /IVC/DJB approved make

S/o GI bend 80mm dia 90deg. Double flange. Heavy class

S/o of 80 mm dia D/F GI pipe in ‘’B’’ class as per ISI 3 mtr (10 feet) long each, complete with cutting flange for submersible cable and support welded. .make :- Jindal / TATA or any other make approved by DJB.

S/o required off size threaded heavy duty nut-bolts of good quality as per site requirement

S/o pressure gauge of 100 mm dia, 0-30 PSI complete with socket, bush Make:-H-Guru/Fiebig

Supply of neoprene rubber sheet having 50% neoprene , 3 mm thick Make Jyoti/Worth/National/DJB approved

Supply of RCCB of 63 Amp. Capacity, four pole. Make: L&T/Havells/any DJB approved make

S/o rubber mat for electrical purpose of size 1mX2m and 3mm thick. Make:-Jyoti/National or any make approved by DJB

Supply of 35 sq mm Alluminium armoured cable X 3.5 core. Make : Havells/Grandley/ any DJB approved make

Earthling with G.I. earth pipe 4.5 Mtr. Long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. DSR 5.2(E&M)

supplying and fixing 25mm x 5mm GI Strip at 0.50 metre below ground as strip electrode, including connection/ terminating with G.I nut, bolt and washer etc as requiredd spring,washer etc as required(jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50 mm)

Installation of all E&M Equipments, lowering pump set in to the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size I/C watch and ward cartage, taking all safety measures, all tools an tackles testing and commissioning of all E&M equipments at no load and full load conditions as per standard from full satisfaction of Engineer-in-Charge.

Engagement of Staff operation & maintenance of various tubewells inside ITPO complex (20 Nos) includes watch and ward and to check the operation /system of various Tube Wells in each shift and Maintenance work as lowering /lifting of submersible pump sets, maintenance of the electrification system/panel etc. as required at site and immediate report to the engineer in charge telephonically .The firm will provide the all tools and tackle for maintenance work , and tools and tackle from site to site of various t/wells . 1.Skilled Electrician (Experienced) – 1 Nos.(General Shift) 2.Skilled Fitter (Experienced ) – 1 Nos.(General Shift) 3.Unskilled (Beldar) – 4 Nos.(3 Shift)-12 nos.

Engagement of Staff operation & maintenance of various tubewells inside ITPO complex (20 Nos) includes watch and ward and to check the operation /system of various Tube Wells in each shift and Maintenance work as lowering /lifting of submersible pump sets, maintenance of the electrification system/panel etc. as required at site and immediate report to the engineer in charge telephonically .The firm will provide the all tools and tackle for maintenance work , and tools and tackle from site to site of various t/wells . 1.Skilled Electrician (Experienced) – 1 Nos.(General Shift) 2.Skilled Fitter (Experienced ) – 1 Nos.(General Shift) 3.Unskilled (Beldar) – 4 Nos.(3 Shift)-12 nos.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Boring and Installation of tubewells inside ITPO Complex.

Item Wise BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Bidder needs to enter Rs.1 in Column No.13 on highlighted cell to validate the BOQ

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

Plastering in C.M 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete