ADDITION/ALTERATION CUM SPECIAL REPAIR TO CERTAIN OFFRS, JCOS AND OR MARRIED ACCN AT OLD CANTT ALLAHABAD

Amount

Demolition of cement concrete reinforced as in chajja and similar suspended work complete all as specified and directed.

M&L for Precast Reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in manhole cover ,chajja,sun shade ,plateform etc. complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for brick work with fly ash bricks ,old size straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified and directed.

M&L brick work with fly ash bricks ,old size straight or curved on plan exc 6 m mean radius built in cement mortar 1: 6 complete all as specified and directed.

Dismantling brick tiles any size laid bedded and pointed in any mortor complete all as specified and directed.

Demolition of mud in roofs including existing roof treatment any thickness and in any position and leaping over roof terrace ,removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding, coping , kerb etc finishing the surface fair & even. complete all as specified and directed.

BLANK

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Preparation of PCC/RCC roof surfaces and then providing 10 mm thick modified plaster in cement mortar l:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. NOTE : Application shall be done through Authorized Applicator of manufacturer.

BLANK

Cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished built with grey cement and no pigment over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles (mat finish) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles (mat finish) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed

M&L for Coloured Glazed ceramic tiles in vertical surface 450 mm X 300 mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for dark shade/double charged/ultra charged Vitrified Ceramic tiles 08 to 09 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for dark shade/double charged/ultra chargedVitrified Ceramic tiles 08 to 09 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Machine cut kota stone slab size not less than 550 mm x 550 mm, 18 to 20 mm thick as in floor laid over and including 20 mm screed bedding in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Kota stone slab 18- 20 mm thick (in full length one piece) in riser of steps, skirting, dado and pillar laid over and incl 10 mm thick plaster in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18-20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) Including any type of tiling/finishes and Paver blocks complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40 mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement in floor complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement, making joints 12 mm wide to the full depth of PCC at every 3 metre and every change of direction and filling the same with bitumen and sand mixture at 1:3 complete all as specified and directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface complete all as specified and directed.

Supply only Liquid water proofing compound of approved make complete all as specified and directed..

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete all as specified and directed.

BLANK

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer complete all as specified and directed.

BLANK

M&L for preparing old plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer & complete removal of existing surface complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over and including a coat of primer and wall care putty not less than 1 mm thick complete all as specified and directed.

BLANK

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and wall care putty not less than 01 mm thick including complete removal of existing treatment complete all as specified and directed.

BLANK

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors including necessary earth work and demolition of PCC as required complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors including necessary earth work and demolition of PCC as required complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F in repair 110 mm PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&Fin repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75 mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm x 5 mm flat iron including bolts and nuts for fixing with 100 mm/1l0 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm x 5 mm flat iron including bolts and nuts for fixing with 75 mm bore pipe complete all as specified and directed.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.

Refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20 mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair brass chromium plated 2 way bib cock having one side handle and other side aerator with wall flange 15 mm dia including fixing to pipe complete all as specified and directed .

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed.

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed.

S&F in repair Sink bowl type (without drainage board) made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 609 mm x 457 mm x 254 mm complete all as specified and directed.

S&F in repair Sink mixture, wall mounted with 150 mm long swivel spout connecting legs and wall flanges fixed to iron pipe 15 mm bore complete all as specified and directed .

S&F in repair vitreous china wash hand basin white flat back size 550 mm x 400 mm with pedestal excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed .

S&F in repair 15 mm bore central hole basin mixer with 450 mm braided connection pipe (without popup) complete all as specified and directed.

S&F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size with shower arm and fixed complete all as specified and directed

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

Supply and fix 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed..

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair Kitchen rack plate of stainless steel of size 75 cm x 60 cm all as per sample kept with GE office & approved by GE.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair brass chromium plated Tumbler holder complete all as specified ,directed & approved by GE. Make:- Jaquar cat part No AKP 35741P or equivalent in makes as specified.

S&F in repair SS soap dish complete all as specified and directed Make Cera Cat Part No. F5007106 or equivalent in makes complete all as specified and directed.

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed

M&L for Treatment to sunken floor and sides as mentioned here in after complete all as specified and directed :- (Step-I)Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II) M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite or equivalent in specified make (Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV)M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40 mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for Providing 25 mm thick, cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate in flooring in sunken slab complete all as specified and directed.

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS Bracket and steel cover for each rod cut to size and fixed in position complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.

Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm thick single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid panel PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC Sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets foor top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet bedding, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

S&F 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

M&L for preparation of new steel primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed.

M&L PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in bed block and filling in door frames complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and directed.

S&F 100 mm long stainless steel hinges complete all as specified and directed.

M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3 mm(+ 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + 0.2mm thick galvanized steel frame (30 mm x 18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mm x 100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories .(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 140 mm Floor door stopper of stainless steel body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A complete all as specified and directed.

M&L for Cutting holes into or through brick walls built in cement mortor superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed

S&F 18 mm thick celuka ply of single side prelam/Rigidlam colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete all as specified and directed (Density - 575 to 600 Kg/CBM)

S&F 18 mm thick celuka ply (PVC) of plain white(Matt finish) colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed (Density - 575 to 625 Kg/CBM).

S&F auto closing hinges 35 mm of 0 crank(KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. (Make- KAFF, Godrej & Hettich or equivalent specified make.)

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed.

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed .

S&F stainless steel 304 grade wire basket of different sizes for utensils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed .

M&L for GI pipe 50mm dia medium grade laid on sunken floor incl painting pipe with anti corrosive paint (black Japan) & necessary grouting with cement complete all as specified and directed .

S&F stainless steel peg set of 6 hooks complete all as specified and directed.

S&F GI wire netting 0.90 mm dia & 12 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings stanchions, beams, etc. including all laps, cuttinq and waste complete all as specified and directed

M&L for cleaning of rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry complete and then applying zinc antirust agent over reinforcement bars and applying bonding coat of Epoxy bonding adhesive @ 2.20 Sqm/Kg of approved adhesive on chipped portion of RCC than and applying micro concreting M25 grade (design mix) with pressure guniting machine on RCC members (columns, beams, slabs, chajjas etc) 25mm thick (total thickness) including necessary form work complete all as specified and directed.

S&F 40 mm width continuous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed .

BLANK

Supply only Telescope basket (channel) 18/20 inch(45/50cm) length extruded MS galvanised over rollers of approved make complete all as specified and directed .

M&L for providing damp proof layer on all external walls upto cill level(outside &inside) in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.50 kg/ Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. On dried plastered walls, apply single coat Penetrative cum film for int. walls that provides best in class solution to the problem like dampness and efflorescence Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA or equivalent specified make.

Chipping of unsound / weak concrete material of 25-50mm average thickness from slabs, beams, columns, chajjas etc with manual chisel and or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and directed.

BLANK

BLANK

BLANK

M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed .

Dismantling posts or struts(wood, steel or RCC) any section embeded in concrete, brick work, ground masonry incl taking out embeded portion and making good disturbed, ground complete all as specified and directed.

Dismantling of chain link fencing complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for cement concrete Type D2 1:4:8 (40 mm graded graded graded graded in foundations, filling and mass concrete complete all as specified and directed.

M & L steel work conforming to Fe 410-0 or Fe 310-0 in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.complete all as specified and directed.

S&F Mild steel deformed bars/round bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

Supply only MS galvanised chain link fencing, any size or shape as per sample approved by GE complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness incl Nainital Pattern or similar pattern roof covering and S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per item no 159 above but for one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and directed.

All as per item no 159 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch complete all as specified and directed.

All as per item no 159 above but for one bell/buzzer point controlled by one bell push single pole one way complete all as specified and directed.

All as per item no 159 above but for Two way point control by Two two way 5 Amp swithes complete all as specified and directed.

All as per item no 159 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm complete all as specified and directed.

All as per item no 159 above but an independent board with cables of size 4.0sqmm (for Geyser) complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5/6 Amp, 230 volts, flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 15/16 Amp, 230 volts, flush type complete all as specified and directed.

Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed.

S&F Switch modular, flush type, single pole, Two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6 amp, 2/3 modul2 combined 2 module complete all as specified and directed.

Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular metal flush box1/2 module complete all as specified and directed.

S & F Modular metal flush box 3 module complete all as specified and directed.

S & F Modular metal flush box 4 module complete all as specified and directed.

S & F Modular metal flush box 6 module complete all as specified and directed.

S & F Modular metal flush box 8 module (vertical) complete all as specified and directed.

S & F Modular metal flush box 8 modules(Horizontal) complete all as specified and directed.

S & F Modular metal flush box 12 (3 row x4) modules complete all as specified and directed.

S & F modular white cover plate 1 module complete all as specified and directed.

S & F modular white cover plate 2 module complete all as specified and directed.

S & F modular white cover plate 3 module complete all as specified and directed.

S & F modular white cover plate 4 module complete all as specified and directed.

S & F modular white cover plate 6 module complete all as specified and directed.

S & F modular white cover plate 8 module for vertical complete all as specified and directed.

S & F modular white cover plate 8 (Horizontal) modules complete all as specified and directed.

S & F modular white cover plate 12 (2 x 6) modules complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63 mm X 50 mm dia complete all as specified and directed.

S&F bell push piano, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling fan regulator, electronic, Rotary 5 step type in two module suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Supply & fixing fan regulator, modular type in 2 module 5 step , 120 watt single phase complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 10 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed.

S&F 1 x 10W LED Mirror light fitting 2 feet long, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F for LED bulk head light fitting 9/10W LED 600 Lumen enclosed in polycarbonate body weather proof, LED lighting fixture with co extruded polycarbonate body environmental friendly energy efficient complete with all accessories prewired and making connection with and including 23/0. 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 metre fixed to wall firmly complete all as specified and directed .

S& F LED tube light fittings of 18 wattage including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 metre fixed to wall firmly , complete all as specified and directed.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F 1 x 12W LED ceiling mounted tube light fitting, LED 6000K, surface decorative, polycarbonate body LED lighting fixture with extruded , environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F 25 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI earth wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed.(Note- The cost of GI wire and protection pipe upto test point shall be included in above quoted rates.)

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FRls PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down carefully ceiling/ exhaust fan by disconnecting all electrical connection and refixing the same including electric connection wire 3 core 23/0.0076 copper conductor including one coat of synthetic enamel paint and marking MES no with paint after necessary repair work complete all as specified and directed.

Taking down existing Geysers including connection of its electric & water connection and depositing to MES store and S&F of new Electric water heater geyser, storage type, 25 litre capacity 5 star rated with copper inner tank complete with all other connected accessories including its necessary electric & water connection complete all as specified & directed. (NOTE: Existing geysers shall be deposited by the contractor in AGE E/M Old Cantt yard.

S&F in repair two pin and earth plug and socket with 1 MCB single pole 20 to 32amps 'C' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

Taking down LT Panel board, steel enclosure with MCCB/MCB of any capacity including making holes steel board and making good disturbed surfaces of walls to match the existing complete all as specified and directed.

Supply and fix exhaust fan heavy duty exhaust fan 300 mm,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint complete all as specified and directed.

Taking down old/existing Geysers from site including disconnection of all the water and electric connections and re-fixing in same or other locations as directed, reconnection of its electric and water connections complete all as specified & directed. (NOTE: The contractor shall deposit the taking out old/existing geysers to store yard of AGE E/M old cantt and recollect them for re-fixing at site.Quoted rates shall deemed to be included for the nut-bolts,washers,fasteners & transportation .

M/S Amar Enterprises

SEAHAWK ENTERPRISES PVT LTD

DEORA ELECTRIC WORKS

m/s meetu enterprises

M/s DHARAM VIR GHAI

M/s Singh Engineering Corporation

ORIENT ELECTRIC CO