Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.1 LAccepted-AOC 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹17.3 L+₹1.1 L (7.14%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹17.4 L+₹1.3 L (8.04%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹18.9 L+₹2.8 L (17.3%)Rejected-Finance 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | L4 | Rejected-Finance Other than Lowest |
Tender Value
₹23.5 L
EMD Value
₹47,000
Closing Date
29 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
GE NASIRABD 305601 (RAJ)
PROVN OF 10 TOILET CUM BATHROOM ALONHWITH COMPLETE KIT INVENTORY AT ARMED REGT AT NASIRABAD
2022_MES_566139_1
8309/E8
Open Tender
Civil Works
Item Rate
183 days
NASIRABAD
AS PER NIT
6 documents required · 6 mandatory
₹500
GE NASIRABAD
₹47,000
Yes
21 Apr 2023
30 Nov 2022
31 Dec 2022
30 Nov 2022
29 Dec 2022
16 Dec 2022
30 Nov 2022 - 5 Dec 2022
Amount
Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed.
Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc and getting out in any type of soil complete all as specified and directed.
Removel of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above from the starting point complete all as specified and directed.
Returning, filling in including spreading levelling watering and well ramming in layer not exc. 25 cm thick complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, with 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.
M & L for broken stone boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 75mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in subbase to floor , complete all as specified and directed.
M & L for Non-skid Ceramic coloured tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), over 25 mm thick PCC type 1:2:4 type B-0 using 12.5mm graded stone, complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick, area of tile exc 0.11 sqm but n.exc 0.18 sqm, on vertical surfaces of wall such as skirting/ dados ect set and jonted in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonry walls in CM 1:4 complete all as specified and directed.
M&L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.
M&L brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M & L for rendering 15mm thick in cement plaster 1:6 on brick masonry (internal) surfaces finished even and smooth (without using exta cement), complete all as specified and directed.
M & L for rendering 15mm thick in CM 1:4 (mixed with water proofing compound) on brick masonry (external) surfaces finished even and smooth (without using exta cement), complete all as specified and directed.(WPC will be measured and paid separately).
M&L for rendering 5 mm thick in cement plaster 1:3 as in ceiling surfaces finished even and smooth (without using exta cement) complete all as specified & directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on wall surfaces, complete all as specified and directed.
M & L for preparation of newly plastered surfaces of walls & applying three coat of white wash complete all as specified and directed.
M & L for preparation of newly plastered surfaces of Ceiling & applying three coat of white wash complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C-1 as in plinth protection finished fair and even without using extra cement n exc 2m in length and joints filled with bitumen mastic (1:1) complete all as specified and directed.
M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
All as per serial item No. 20.00 here-in-before but 8mm dia.
All as per serial item No. 20.00 here-in-before but 6 to 10mm dia in stirrups, spacers and binders.
M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge
M & L for M-25 grade (design mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for RCC M-25 (design mix) using 20mm graded aggregates as in Roof beams, lintel beams/bands, cantilevers, bressummers, lintels over 1.5m span, chajjas etc complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to sides and soffits of floor or roof beams, soffits of lintel beams/ bands, chajjas, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for RCC M-25 (design mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed.
S&F steel ventilators, top hunged type glazed and gauzed including guard bar with hinges, peg stay, steel handle, with flyproof,dovetailed or welded complete all as specified and directed.
S & F Steel windows with side hung shutters glazed and gauzed including guard bar including projecting type hinges with steel handle, and steel peg stay, with glazing bars and flyproof,dovetailed or welded complete all as specified and as directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed.
M&L for preparing the steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 176 of SSR Part - II 2020 complete all as specified and directed.
S&F for aluminium anodised barrel tower bolt 150mm long of extruded section complete all as specified and directed.
S&F for aluminium anodised handle 150mm long fabricated type complete all as specified and directed.
S&F aluminium butt hinges ISI marked of size 100mm complete all as specified and directed.
S&F PVC floor/nahani trap with grating 75mm dia fixed with lead joint complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors of bore 110mm.complete all as specified
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors of bore 75mm.complete all as specified
S&F PVC (SWR) 110 mm bore bends (any radius) fixed with cement joint complete all as specified
S&F PVC (SWR) 75 mm bore bends (any radius) fixed with cement joint. complete all as specified
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F water tubing 15mm bore, medium weight ISI marked galvanised with all fittings & fixed to walls, ceiling or laid in floors complete all as specified and directed.
S&F water tubing 20mm bore, medium weight ISI marked galvanised with all fittings & fixed to walls, ceiling or laid in floors complete all as specified and directed.
Cutting chases in brick walls, pining in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed
M&L for 20mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed
M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, WHB platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete specified and directed.
Rounding to edges of stone slab one edge, such as steps, WHB platform and other similar situations and rubbing and polishing complete all as specified and directed
S&F vitreous china white wash basins, including waste pipe, brackets, and connecting pipe Table top basin Kerovit Mazer KB1086 or equivalent complete all as specified and directed.
S&F in repairs vitreous china urnials half stall type incl connecting pipe, spreader, flushing valve and flush/waste pipe fixed to wall complete all as specified and directed . Make : Parryware C0580/C8123 or Jaguar URS WHT 132530
S&F curved shaped 8mm thick frosted glass urinal partition of size 900x 450mm incl necessary SS clamp and bottom support to fixed on wall and floor complete all as specified and directed. Make Jaguar JSE-CHR-810UC 450X
S&F health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed. Make Jaquar ALD CHR-573 or parryware T9941A1
S&F cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed. Make:- Parryware T3201A1 or equivalent make and model as approved by AO.
Supply and fixing in CP brass shower rose (4'' overhead ABS) with 225mm CP brass arm and flange complete all as specified. Make :- Prayag Cat No. BOS-87
S&F in Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.
S & F vitreous china wash down water closet pan EWC (pedestal pattern) white incl fixing bolts & seat cover etc but excluding flushing cistern and flush pipe complete all as specified and directed
Supply and fixing in repairs Squatting pattern Water closet, Orissa pattern of vitreous china Size 580x440mm wide with integral foor rest etc complete all as specified and directed.
S&F PVC valve less syphonic action type, low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float and handle & flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F 15mm bore, stop cock / angle valve, cast copper alloy, fancy type chromium plated with long shank & cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and directed.
S&F in repair, 15mm bore Brass CP mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified.
BLANK
S&F 15mm bore , 450mm long PVC connection with PTMT nuts complete all as specified and directed.
S&F Chromium plated fancy type bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
S&F tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.
S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S&F ball valves PTMT with high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25mm bore (min weight 210 gms) complete all as specified and directed.
Supply only liquid water proofing compond. Make : Fosloc Conplast/Sikaor equivalent make as approved by AO.
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
M&L for 100mm thick Plain cment concrete C2, 1:3:6 (using 40mm graded stone aggregate as sub base of floors or foundations complete all as specified.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M & L for cement concrete (type B0, 1:2:4, 12.5 mm graded aggregate) in copings, kneelers, apex stones, bed plates, water troughts and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed Note :- WPC will be measured and paid separately.
M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 2.60 Kg/ Sqm applied with bonding material using belown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.
M&L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.
BALNK
BLANK
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all specified and directed
M & L for PCC 1:2:4 Type B2 using 40 mm graded aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all specified and directed
S&F salt glazed stone ware drain pipes of 150mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.
M & L for concrete bed to drain pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all specified and directed
M & L for precast cement concrete (type B-1, 1:2:4, 20 mm graded aggregate) in landings, cover slabs (for manholes etc.) complete all as specified and directed.
Supply & laying FRP septic tank package type waste water treatment system (PWTS) 1490 mm dia and 1615 mm height including necessary inlet & outlet pipe designed to carry sewage and salvage water, With UPFLOW FILTER INLCUDING MEDIA complete all specified and directed . Make :- Model No. PWTS-AM-180-01 of Sintex or equivalent.
M & L for soakage wells including excavation in any type of soil, foundation in PCC (1:4:8), walls of honey combed fly ash brick masonry with top ring of RCC 1:1.5:3 type A-1 concrete including intercepting chamber and screen chamber made of fly ash brick masonry in CM (1:6), RCC cover slab in1:1.5:3 type A-1 & SFRC MH cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia & 3.0m effective depth all as per drg No. CEBZ/TD/78/2011 sh No 1/2 & 2/2 complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-
One light/ exhaust fan point controlled by one, one way switch.
All as per item No. 93 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed.
S&F switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed.
S&F switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed.
S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all as specified and directed.
S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed.
S&F LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Havells Cat part No PHOTONULTRA2.01212T8SSTL20WLED 865SPC (for tube) REGALBATTENT8UPTO1X22WDSBSWH (for batten)Bajaj Cat Part No BLRB 18W CWc for tube , BLRB - DB 118 for batten, or equivalent model of Philips/Crompton
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Bajaj/Havells/CG
S&F of lamp holder PVC/Polycarbonate type with back plate complete all as specified and directed.
S&F of LED lamp 9/11 watt complete all as specified and directed. Make Bajaj/Havells/CG
S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Bajaj/Havells/CG
Supply, fixing testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of Surya/Control& Switchgear/Bajaj
Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts for fixing of street light complete all as specified and directed by Engr-in-Charge.
S&F exhaust fans AC single phase 230V of size 300mm sweep with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. Make: Havells/Bajaj/Crompton.
S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed.
S & F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.
S & F MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core.
Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection .
Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.
M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.
Supply and fixing tubes medium grade GI tubing 20 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection .
Supply, installation, testing and commissioning of 500 LPD solar Hot water System (Flat plate collector) based on indirect transfer heat with electrical back up and including all other standard accessories as specified in section 26 of SSR Part-i, complete all as directed. Make: Solechrome/Rashmi or equvalent approved make. Note: (i) The Solar water heater shall be installed/mounted as per manufacturer's recommendation. Steel structure required for mounting included in the quoted rate. (ii) The cost of interconnecting pipes from outlet of roof top cold water tank to solar water heater including all other standard arrangement and standard fixing accessories deemed to be included in the quoted rate.
M&L for drilling and tapping cast iron water mains (in position) for branch connections of internal dia 20 mm, complete all as directed.
S&F 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S&F mild steel rolled sections as in main and cross beams, for dtaging of water tank fixed with angle cleats or other connecting plates etc. conforming to Grade E-250 quality `A’ all as specified and directed.
M/S JAGDISH PRASAD AIRUN
M/s S. K. Construction Co.
M/s AKASH CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .