Conversion of old E-3 Sub Station into ICE Workshop at GSL yard

Amount

Demolishing cement concrete manually/ by mechanical means including disposal/stacking the same as per instructions of Engineer - in - charge and concrete of richer mix,including disposal of same as per the instructions

Supplying and filling of earth (including royalty)by mechanical transport also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.

Dismantling doors and taking away / Disposal the same by manual and mechanical means, including loading, transporting, unloading to approved municipal dumping ground outside GSL Yard or as approved by Engineer-in-charge, including

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical ans,including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Rubble soling /Rubble packing with hard laterite stone including watering, ramming and consolidating, compacting, etc. in trenches, foundations, floor, road etc. all labour, materials complete.

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size excluding the cost of centering and shuttering including compacting, curing etc all labour and materials complete.

Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).in columns,lintels,beams,chajjas,walls ,etc. excluding cost of centering, shuttering, finishing,reinforcement and including all labour, materials, tools, scaffoldings. curing etc complete.

Steel reinforcement for R.C.C. work with Thermo-Mechanically Treated bars of grade Fe-500,including straightening, cutting, bending, placing in position and binding all complete.

Centering and shuttering including strutting, propping etc. and removal of form for all heights all babour, materials, tools, scaffoldings etc complete.

Providing and laying in position cement concrete of 1:2:4 for floor (1 Cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size including the cost of centering and shuttering including compacting,curing etc all labour and materials complete.

Neat Cement Punning to the concrete surface with tread markings as instructed by OIC

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in all sizes in superstructure all labour, materils, tools, scaffoldings, curing etc complete.

15 mm cement plaster on the rough side of wall of mix 1:4 (1 cement: 4 fine sand) all labour, materials, scafoldings, curing etc complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth all labour, materials, etc complete.

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 and a top layer 6mm thick cement plaster (1:3),sponge finish, all labour, materials, tools, scaffoldings, curing etc complete.

Providing and fixing powder coated anodized aluminium shutters with frames as per direction of the Engineer-in-charge for fixed partitions using 16 gauge sections with Plain glass,particle board,powder coating with pure polyester powder of shade of approved colour on the aluminium section including all taxes, transportation, scaffolding and handling, labour, materials, etc. complete

Providing and fixing powder coated anodized aluminium shutters with frames as per direction of the Engineer-in-charge for single or double leaf door shutters using 16 gauge sections with Plain glass,particle board,powder coating with pure polyester powder of shade of approved colour on the aluminium section, handles, lock, tower bolts, latch, door stoper etc. including all taxes, transportation, scaffolding and handling, labour, materials, etc. complete

Providing and fixing in position rolling shutter suitable for manual operation of approved quality/make 19gauge, 80mm wide GI laths of convex/flat corrugations with pressed side guides of one piece construction and pressed bottom rail,extra strong door suspension shafts made out of heavy pipe loaded with high tension coil type spring made out of strong spring wire,hood cover ,locking arrangements,pulling hooks,handles with cover of 18gauge GI sheet, operated by bevel gear box and crank handle pully,etc., painting with two coats oil paint over a coat of red oxide zinc chromite primer,finishing the edges with plaster putty etc,preparing and clearing the surface including all labour and materials etc. complete.(measurements for the rolling shutters will be based on the clear dimentions of the opening for which the shutter is used) inclu dismantling and taking out the existing shutter

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat,2 coat oil painting of approved make all complete:

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth)

Providing and fixing PVC down take pipe 110mm for new shed including all labour and material complete.

Providing and laying 250mm dia RCC hume pipe including all labour and material complete.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness including holdfast/annchor fastener/srews.The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame anchor fastener,sqrews etc all balour and materials complete..

Providing and fixing Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames with hinges,aldrop,tower bolts,latch,handles etc all labour and materials complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 1",having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling,or conceled in wall & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 3/4",having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling,or conceled in wall & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing ball valve 1"including all labour materials complete.

Providing and fixing ball valve 3/4"inculding all labour materials complete.

Providing and fixing brass Bib cock/push cock/stop cock/urinal cock 1/2" including all labour and material complete.

Providing and fixing 4" PVC line for sewer including all labour and material complete.

Providing and fixing 2" PVC line for wash basin, urinal including all labour and material complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar1:3 (1 cement : 3 coarse sand), finished smooth with a floating coatof neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular)bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber :For 500x700 mm sizeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing Exhaust fan 8" with flap type including all labour and material complete.

deepak engineers and Contractors

GOA AEROMARINE AND ENGINEERING SERVICES PVT LTD