Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.7 LAccepted-Finance | L-1 | Accepted-Finance found in order | |
| 2 | L-2₹22.8 L+₹13,030 (0.57%)Accepted-Finance | L-2 | Accepted-Finance found in order | |
| 3 | L-3₹24.5 L+₹1.8 L (8.00%)Accepted-Finance 213 BAHARTI NAGAR SUBASH NAGAR JAMMU JAMMU JAMMU JAMMU KASHMIR 180007 | JAMMU | JAMMU AND KASHMIR | 180007 | L-3 | Accepted-Finance found in order |
Tender Value
Refer Docs
EMD Value
₹60,788
Closing Date
27 Oct 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER ELECT FTR HQ BSF JAMMU
Executive Engineer (Elect),FTR HQ BSF JAMMU
Renovation of street / security light at Bn HQ Mandir Mandi under SHQ BSF Rajouri
2023_BSF_776149_1
23/EE(E)/FTR-Jammu/2023-24
Open Tender
Electrical Works
Item Rate
180 days
BN HQ BSF MANDIR MANDI POONCH (J AND k)
AS PER TENDER DOCUMENT
14 documents required · 14 mandatory
₹0
₹60,788
13 Dec 2023
13 Oct 2023
1 Nov 2023
13 Oct 2023
27 Oct 2023
13 Oct 2023
13 Oct 2023 - 18 Oct 2023
Amount
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
a) 63 mm dia (OD- 63 mm & ID- 51 mm nominal)
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct open in wall with flat clamp/Sadles of suitable size complete as required.
a) 63 mm dia (OD- 63 mm & ID- 51 mm nominal)
Supplying and laying of following size medium class GI Pipe as per IS:1239 (I), ISI marked, for protection of UG cable, across the road / concrete floor including cutting, finishing, making good same etc as required.
a) 50 mm dia size
b) 40 mm dia size
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC Innersheathed, armoured power cable of working voltage 1100 volt, confirming to IS : 7098 (Part-1) 1988 of following size in the existing HDPE / GI pipe etc as required. (Make Havells /Polycab/ Finolex /CCI /Universal /RR Kable)
i) 3½X50 sq mm
ii) 3½X35 sq mm
iii) 3½X25 sq mm
iv) 2X25 sq mm
v) 2X16 sq mm
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC Innersheathed, armoured power cable of working voltage 1100 volt, confirming to IS : 7098 (Part-1) 1988 of following size in the exsiting masonary open duct / open in air /directly clamp on wall for connection purpose etc as required. (Make Havells /Polycab/ Finolex /CCI /Universal /RR Kable)
i) 3½X50 sq mm
ii) 3½X35 sq mm
iii) 3½X25 sq mm
iv) 2X25 sq mm
v) 2X16 sq mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
(i) 2 x 16 Sq.mm (22 mm)
ii) 2 X 25 sq. mm (22mm)
iii) 3½ X 25 sq. mm (22 mm)
iv) 3½ X 35 sq. mm (32 mm)
v) 3½ X 50 sq. mm (35 mm)
Supplying and erection of swaged type Steel tubular Pole, Cat. No.410-SP-11 (8.0 Mtr long, 83 Kg weight), ISI marked complete welding Anchor plate of size 30 cm x 30 cm 6 mm at bottom of the pole including providing suitable cap at the top to prevent the rain water, complete with black bitumen paint for a length of 1.65 mtr from bottom both internally and externally and remaining portion with one coat of Red Oxide paint etc as required. welded with MS base plate of size 300X300X6mm, continuosly welded pole bottom to top of size (4.5 m x 114.3 mm dia x 4.50 mm thickness), (1.75 m x 88.9 mm dia x 4.05 mm thickness) & (1.75 m x 76.1 mm dia x 3.25 thickness) as per drawing approved by engineer in charge.
The pole shall be installed in cement concrete foundation 1:3:6 (1: cement: 3 coarse sand and 6 graded stone aggregate 40 mm nominal size) with the help of base plate including excavation and refilling and making collar size 0.5 Mtr above the ground level, anchor bolts of 20 mm dia. by laying Iron bar mesh fabricated with 8 mm dia. complete as required. The cost shall include supplying and fixing of 50 mm dia, 1.50 mtr long two numbers double walled corrugated HDPE pipe having corrugation on the outer wall and plane surface inner wall (conforming to IS 14930 Part-I and Part-II) in pole foundation for cable entry to the pole etc complete as required.
Fabricating, supplying & installation of 40 mm dia (medium class) GI pipe bracket 1.0 mtr long for mounting of LED street light fitting directly on pole, duly welded by GI reducer of suitable size at required angle with 50 mm dia (medium class) GI pipe, 30 cms long complete with top cover of the pole with suitable size of nut & bolts, washer etc as rquired to prevent the rain water including providing and welding 6.3 mm thick MS plate to support the bracket etc. as required as per drawing approved the engineer in charge. (Make Jindal/TATA/Bansal) (At existing old poles & new poles)
Supplying and fixing of 02 Nos. iron clamps of size 25 mm X 3 mm flat iron in suitable shape & length with suitable size nut & bolts etc as required for existing street light GI pipe bracket on existing RCC/ PCC pole as per direction of engineer in charge. (Make Jindal/TATA/Bansal) (At Old Poles)
Supplying and erection of channeled shaped Flood Lighting Bracket (suitable for mounting of 01 Nos. flood lighting luminaire on existing 8 Meter long steel tubular pole) made out of 4.00 mm thick MS sheet of size (100 mm x 300 mm) with 4 mm thick suitable dia. MS flange duly welded with suitable dia, medium class, 200 mm long MS pipe with 02 Nos. suitable dia symmetrically located holes / slots with all accessories including providing and fixing matching G.I nuts-bolts and washers as required for fixing the bracket on the existing pole. . (At Old Boundary Poles)
Painting of 8.0 mtrs street light poles alongwith brackets with 2 coats of aluminium paint of approved shade including lettering /numbering with black paint on yellow back ground on poles etc as per direction of engineer in charge as required.
Supplying,Installtion, testing and commissioning of 01 No. 45 Watt LED Street light luminaire at existing street / security light pole, luminaire made up of pressure die cast aluminium housing, IP 66 Protection, minimum lumen per watt - 100 Lm/watt, Make- Havells Modal-ENDURA SUNDOWN or equivalent model of make Crompton/Syska/ Phillips, including providing and fixing suitable size nut and bolts with spring washer etc. complete as required.
Supplying, Installtion, testing and commissioning of 01 No. 50 Watt LED Flood light luminaire, 100 lumen/watt, make -Havells - Model- Quanto plus / equivalent model of (make Philips/syska/Crompton/C&S) suitable for 240 V, AC, 50 HZ, LED flood light luminaire made up of pressure die cast aluminium housing ,IP 66 Protection, including providing and fixing suitable size nut and bolts with spring washer etc. a complete as required.
Supplying and wiring of existing 8.0 mtr Street light pole with Three core 1.5 sqmm, PVC insulated and PVC round sheathed, copper conductor flexible industrial cable for voltage grade 1.1 KV, confirming to IS 694:2010 (make- Polycab/Havells/RR Kable/Finolex) from end termination box to existing 01 no. 60 watt LED light fitting including connections, inter connections, extra as per specification complete as required.
Supplying, installation, testing and commissioning of weather proof thermoplastic Loop / SMC junction box of size 250 x 200 x 105 mm with lid ( Syntex / Hensel make ) on the existing street light pole at suitable height with suitable size of clamps, nut & bolts and required quantity blanking holes suitable for 2 X 16 sq.mm PVC UG cable including providing and fixing 01 No. PVC / backelite connector strip 4 way, 63 Amp current rating (suitable for incoming and outgoing cable of 16 sq. mm connections) , 01 No. 10 KA 'C' curve 6 Amp SP MCB, drilling holes, connections, interconnections etc as required.
Fabricating, supplying, installation and testing of 415 V, 3 phase, 4 wire, 50 Hz A.C. outdoor type compartmentalized, totally enclosed and Double Door type, weather proof / vermin proof floor mounted feeder pillar of size 750 mm x 600 mm x 300 mm to accommodate the following mountings thereon. It shall be fabricated from 40 mm x 40 mm x 5 mm angle iron (where ever necessary ) frame work and 2 mm thick CRCA sheet complete with hinged doors (both side) having locking arrangement and providing detachable gland plate at the bottom of the panel, complete with 200 Amp 4 Nos strip Aluminium bus bar, 01 no. 160 Amps, 27 KA, 4P, MCCB incomer, 03 Nos. 63 Amp 4P Isolator, 03 nos. 63 amp DP Isolator outgoing (L&T/Havells/ABB/Siemens/C&S make), inter-connections with suitable size of copper conductor, earthling, testing and commissioning etc as required.
The panel shall be painted with one coat of approved quality of anticorrosive primer and two coat of synthetic enamel paint of approved brand & shade and supplied with suitable pedestal of 40mm x 40 mm x 5 mm angle iron frame with 600 mm long legs . The panel shall be mounted on suitable brick / cement concrete foundation 30 cms below ground level and 30 cms above ground including finishing etc complete as required. ( MFP)
Fabricating, supplying, installation and testing of 415 V, 3 phase, 4 wire, 50 Hz A.C. outdoor type compartmentalized, totally enclosed and Double Door type, weather proof / vermin proof floor mounted feeder pillar of size 500 mm x 500 mm x 300 mm to accommodate the following mountings thereon. It shall be fabricated from 40 mm x 40 mm x 5 mm angle iron (where ever necessary ) frame work and 2 mm thick CRCA sheet complete with hinged doors (both side) having locking arrangement and providing detachable gland plate at the bottom of the panel, complete with 200 Amp 4 Nos strip Aluminium bus bar, 01 no. 63 Amps, 4P, 25 KA, MCCB incomer, 04 nos. 32 amp DP Isolator outgoing (L&T/Havells/ABB/Siemens/C&S make), inter-connections with suitable size of copper conductor, earthling, testing and commissioning etc as required.
The panel shall be painted with one coat of approved quality of anticorrosive primer and two coat of synthetic enamel paint of approved brand & shade and supplied with suitable pedestal of 40mm x 40 mm x 5 mm angle iron frame with 600 mm long legs . The panel shall be mounted on suitable brick / cement concrete foundation 30 cms below ground level and 30 cms above ground including finishing etc complete as required. (SFP)
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
Providing & fixing 6 SWG dia GI wire on surface or recess for loop earthing as required
M/s NEPTUNE ENTERPRISES
M/S ROYAL ENGINEERS AND CONTRACTORS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .