PROVISION OF FALSE CEILING IN CGOM DINING HALL UNDER AGE B R I KAVARATTI OF GE NAVY LAKSHADWEEP

Amount

Supply and Fix for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleevs and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx x 900 mm cente to centre with GI cleat and steel expansion fasteners with and incl ceiling section not exc 1.2 m length of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40x3mm size 60mm long and expension hold fasteners 12.5mm dia 40mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of new surface of ceiling by applying 3mm thick wall care putty over one coat of alkali resistant primer and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of new untreated surface of wall by applying three coats thick wall care putty over one coat of alkali resistant primer and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plastered surface of wall by applying to three coats thick wall care putty over one coat of primer and making the surface smooth and applying two coat of texture interior plastic paint complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation old decorated painted surfaces of walls and applying one coat distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.

Material and Labour for complete removal of exisiting treatment on wall surfaces and applying damp proof coating in three layer treatement by applying first coat of Dr. fixit Dampguard classic followed by a coat of Dr. fixit Dampguard classic putty prepared by mixing 1 part of Damguard classic with 1 part of white cement (OPC) mixed so as to obtain consistency of a putty and finally applying second coat of Dr. fixit Dampguard classic, complete all as per manufacturers instructions, the treated surfaces shall be finished smooth and followed by two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-Charge. Note: Rate quoted is deemed to include for providing 104 Dampguard classic of Make Dr. Fixit completely in three layers including layer of putty, as per manufactures instruction upto the satisfaction of Engineer-in-Charge inorder to obtain desired finish and for arresting dampness completely.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, floors, ceiling rose to match with existing complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or carrying to the store (to be measures only when found serviceable) complete all as specified and as directed by Engineer-in-Charge.

Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade. FRLS of size 1.5 Sqmm drawn in and including concealed PVC rigid conduite of size not less than 20mm dia with modular metal flush box concealed and modular white plates with frame of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected common earth dolly as specified for one light point controlled by one switch for light/Fan complete all as specified and as directed by Engineer-in-Charge. Note : (i) Rate quoted should include cost of modular metal flux box concealed and making good walls (ii) Rate include the modular white cover plate with frame. (iii) Necessary blank plate as required at site.

All as per item No 13 here in before but one 3 pin 5 amps switch sockets on same board complete all as specified and as directed by Engineer-in-Charge.

All as per item No 13 here in before but one 3 pin 5 amps switch sockets on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No 13 here in before but with cable size 2.5 Sqmm and 2.5 Sqmm as earthwire for 3/5 pin socket out let independent, 15/16 Amps complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix modular switch 1 way, 6A, 1 module complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix modular socket, 6A- 2/3 pin combined 2 moduole complete all as specified and directed.

Supply and Fix modular switch Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix modular socket, 6/16A- 2/3 pin combined 2 moduole complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix modular fan regulator 120 watt, 2 module, hum free complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix ceiling rose three terminals polycarbonate isolated body complete all as specified and as directed by Engineer-in-Charge.

Supply and fix false ceiling light Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling 120 lumen output of size 2 feet x 2 feet recessed mounted full open type to deliver extra ordinary lumens through its pure form and glare-less light complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No STRATO 2X2PLR36WLED840MOD or its equivalent in Philips / wipro / Bajaj

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor including all connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fix exhaust fan, complete with three blade, louvers, accessories 230V, 300mm sweep, including cutting the existing wall and making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and Labour taking down old unseviceable TPN DB/SPN DB from existing position including all connection complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix SPN DB 4 way double door type 415 V with 200A bus bar and seperate link for common link for neutral and earth including all connection complete all as specified and as directed by Engineer-in-Charge. Note : Blank spaces of DB shall be covered with blank plate.

Supply and Fix RCCB SPN 30 Amp, 240 V, 400 mA earth leakage current complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix MCB SP 5 to 40 Amp, 240 V, B series complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed by Engineer-in-Charge.

Material and Labour Submain wiring with Two runs of 2.5 sqmm size multi stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 2.5 sqmm size multi stranded copper conductor PVC insulated and unsheathed for continious earth wire including all connections complete all as specified and as directed by Engineer-in-Charge.

Anaswara Constructions

VACON INFRASTRUCTURES

STANDARD ENGINEERING