REPAIR AND MAINTENANCE TO LIFTS INSTALLED AT VARIOUS LOCATIONS UNDER GE U P AND M DELHI CANTT 10

Amount

Supply & fixing full length IR door beem sensor, 12 V/0.2 A with 20 number of diodes, pattern of 96 cris-cross beams meeting the requirements of EN 81-20 with IP-65 rating and housed in slim aluminium profile suitable for Johnson make lift complete all as specified and directed.Make-TL Jones Part No.E-10-18RE or equivlents of WECO and Memco.

Supply, installing, testing and commissioning V3F electric door drive single phase with input voltage 220-415 AC and output power 400 Watts and frequency of 50/60 Hz for number of floors>08 alongwith all connected accessories for door drive as per sample on load complete all as specified and directed. Make : As approved by OEM.

Supply & fixing flatTravelling cable 12 core of size 0.75 sqmm (as per sample) suitable for Johnson/Otis/Thyssen make lift with complete all as specified and directed.

Supply & fixing CI OSG pit pully as per OEM suitable for 8/13 passenger lifts complete all as specified and directed.

Supply & fixing steel Buffer spring of length 8 to 10 inch with polished surface treatment of material grade SS316 as per sample suitable for 8/13 passenger lifts of Johnson make complete all as specified and directed.

M & L for painting on steel surfaces of any description over, 10 cm in width or girth with two coat of synthetic enamel paint by spray painting including preparation of old steel surface complete all as specified and directed.

M & L for painting of motor with gear assembly complete including ISMB (capacity 4 KW to 12 KW) installed in machine room of lift installation with two coats synthetic enamel sky blue paint also where black paint is required and write the SM No on motor with superior quality of synthetic enamel white paint after scratching the old paint and preparing smooth surface suitable for painting complete all as specified and directed Engineer-in-Charge.

M & L for fixing stainless steel hand rails of 40 mm external dia 1.2 mm thick stainless steel, medium grade with screwing for passenger/goods lifts complete all as specified and directed Engineer-in-Charge.

M & L for aluminium chequered flooring 3mm thick fixing with acssesories inside the car cabin of 8/13 passenger lifts etc complete all as specified and directed. Make-NSW,Jindal,Hindalco and Vargo.

Supply & fixing MS landing door frame size 2000 x 800 mm for 8 passenger lifts and 2000 x 900 mm for 13 passenger lifts complete all as specified and directed.

Supply & fixing in replacement of steel main hoist rope of size 6 strands x 19 of nominal dia 13mm (in 13 passenger lift) G+8 storey ( 9 storeys ) heavy duty complete all as specified and directed by Engr-in-charge. Make : Usha Martin,Mahadev Elevator,Bharat wire rope Ltd and Shree steel wire & rope.

Supply & fixing in replacement of steel main hoist rope of size 6 strands x 19 of nominal dia 10 mm (in 08 passenger lift) G+8 storey ( 9 storeys ) heavy duty complete all as specified and directed. Make : Usha Martin,Mahadev Elevator,Bharat wire rope Ltd and Shree steel wire & rope.

Supply installing testing and commissioning in replacement alongwith all connected accessories of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD540 x 4 x 10 mm bore size 90 mm ,key size 20 x 7 Bore length -150 mm ,width size 115 mm with main hoist rope of size 10 mm dia heavy duty (in 08 passenger lift) G+8 storey ( 9 storeys ) as per site requirement welding/brazing etc and testing on load complete all as specified and directed.. Make- Otis/Thyssen Krupp/Kone/Johnson Note :- Rate quoted by the contractor are deemed to be inclusive of replacement of minor spares,such as nuts,bolts.cotter pin etc.

Supply installing testing and commissioning in replacement alongwith all connected accessoriest of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD540 x 4 x 13 mm, bore size 90 mm ,key size 20 x 7 Bore length -150 mm ,width size 115 mm with main hoist rope of size 13 mm dia heavy duty (in 13 passenger lift) G+8 storey ( 9 storeys ) as per site requirement welding/brazing etc and testing on load complete all as specified and directed. Make- Otis/Thyssen Krupp/Kone/Johnson Note :- Rate quoted by the contractor are deemed to be inclusive of replacement of minor spares,such as nuts,bolts.cotter pin etc.

Supply and Fix in replacement of MS suspension rod including bull dog clamp and anchoring plate assembly complete as per existing size for Johson make 8/13 passenger lift complete all as specified and directed.

Supply & fixing in replacement of stainless steel OSG rope of size 6 strands x 19 of nominal dia 06 mm complete all as specified and directed. Make : Usha Martin,Mahadev Elevator,Bharat wire rope Ltd and Shree steel wire & rope.

Supply and fix MS Thimble Rod as per existing size provided by OEM for Johson make lift for 10 mm rope (car side & cwt side) complete all as specified and directed.

Supply, fabricating , fixing structural mild steel channel angle iron, flat iron,MS Sheet of suitable gauge as per site requirement,MS Bar (Round ,Squre and flate MS perforated sheet / jalli and brackets etc for fabrications of machine gaurding,pit pully guarding, flywheel guarding, counter weight screen , clamps, bolts, and back plates including nuts, bolts and washers, welding.forming, bending, cold , or hot drilling holes for bolts,screws, in any shape or size as indicated or directed and inclusive of one coat of red oxide primer,one under coat and one coat of finishing coat of synthetic enamel paint complete all as per existing sample fitted at site complete all as specified and directed.

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commissioning of complete Landing door, SS hairline finish metal sheet 18 gauge approx 1.2 mm thickness SS sheet standard 304 scratch resistance including complete door header assy(i.e door hanger roller) and landing sill suitable for 08/13 Passenger lift Make:- Johnson width of centre opening 800/900 mm,height of opening 2000mm,2way center opening with all fittings complete for 2 hours fire rating as per site requirement complete all as specified and directed. Note:- (i) Rate quoted by contractor are deemed to be inclusive of complete replacement of minor spares gate lock,door rollers,skates,door shoe,door rope etc and any civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surface complete all as specified and directed. ii) Any damage done to the door sensor while taking down shall be replaced free of cost by the contractor of same make & model.

Dismantling/ taking down, existing car door without causing any damaged to door sensor and supply, fixing, testing and commissioning of complete car door, suitable to existing lift SS honeycomb finish metal sheet 18 gauge (approx 1.25 mm thickness) SS sheet standard 304 and scratch resistant and complete door operator assembly system (i.e. door motor, door drive air card) and car sill for smooth opening of car doors suitable for 08/13 passenger lifts Johnson Make lift , width of centre opening 800 mm height of opening 2000 mm, 2 way centre opening all fittings complete for 2 hours fire rating, Gate lock, door shoe and refixing of taken down door sensor as per site requirement complete all as specified and directed. (Note :-Any damage done to the door sensor while taking down shall be replaced free of cost by the contractor of same make & model).

(a) Automatic call register and execution system.

(b) Automatic attendant system

(c) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds

(d) Overload/low Voltage/single phase protections

(e) Make of drive : Yaskawa/Emersion/Fuji

(f) Automatic phase reversal system

(g) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete.

(h) Cooling fan for air circulation in controller.

(j) Including COP,read swtich,limit switch and decoder etc with wiring.

(k) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks.

(l) Arrangement of Fire main switch at ground floor with wiring complete.

(i) The Controller shall be compatible to run the lift G + Eight upper floors (total Nine Landings ) having cooling fan, and sufficient space for VVVF drive.

(ii)Main VVVF drive should be provide with calibration pad and proper mounting in controller along with any other connection as required.

(iii) Any other arrangement/alteration for smooth functioning of lifts should be done by contractor without any other extra cost.

(iv) The control wiring shall be secured and confirmed to standard wiring practice and it should be proper fixing on wall/in duct cover with clamping, saddling etc complete

(v) The controller shall be able to connect ,transfer and interrupt power supply and protect the motor against over load.

(vi) During the execution of work any civil /cement work required shall be done by contractor at his own arrangement/cost.

Taking down old unserviceable gear box by disconnecting coupling,removing nut bolts washer etc & Supply and fixing,installation, testing and commissioning gear box with worm & worm wheel of make Greaves Gears, Model No. U600 SLA of gear ratio 40:1 complete and coupling motor and gear box by refixing coupler and check for aligments of motor & gear shafts complete all as specified and directed.

Supply & fixing aluminium landing door sill of size 1700 mm x 50 mm x 30 mm thick as per sample suitable for Johson make 8/13 passenger lifts complete all as specified and directed.

Supply & fixing aluminium Car door sill of size 1700 mm x 50 mm x 30 mm thick as per sample suitable for Johson make 8/13 passenger lifts complete all as specified and directed.

Supply & fixing MS CIS Panel as per sample suitable 18 SWG guage for 8/13 passenger existing Johson make lifts complete all as specified and directed.

Supply & fixing MS Car fan guarding (jali) duly powder coated as per sample suitable for 8/13 passenger existing lifts complete all as specified and directed.

Supply & fixing MS Top of Car inspection (TOCI) Box with NE300 Controller duly painted for existing Johson make lifts with control of limit switchs ,up and down movement alongwith all control wiring complete all as specified and directed.

Supply & fixing MS Car top light Box with suitable cover for bulb / lamp alongwith all (flexible wire) sheathed appx 2 to 3 mtrs wiring connection for existing lifts complete all as specified and directed.

Supply & fixing maintenance free Battery 12V,7AH of 24 months warranty for ARD as per sample suitable for 8 passenger lift for existing lifts complete all as specified and directed.Make-Exide, luminius,Amaron Note :- Battery mfg date shall not be more than two months old from date of installation at site.

Supply & fixing maintenance free Battery 12V,17/18AH of 24 months warranty for ARD as per sample suitable for 13 passenger lift for existing lifts complete all as specified and directed.Make-Exide, luminius,Amaron Note :- Battery mfg date shall not be more than two months old from date of installation at site.

Taking down and supply and fixing, testing and commissioning ARD (Automatic of newRescue Device) with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12V,07 AH - 04 Nos as per site position for the 08 passenger lift complete all as specified and directed. Make :- ThyssenKrupp/OTIS/Johnson/Mitsubishi/Kone/LT Elevator and as per OEM's recommendation with the approval of Accepting Officer.

Taking down and supply and fixing, testing and commissioning of new ARD (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12V,17 AH - 04 Nos as per site position for the 13 passenger lift complete all as specified and directed. Make :- ThyssenKrupp/OTIS/Johnson/Mitsubishi/Kone/LT Elevator and as per OEM's recommendation with the approval of Accepting Officer.

Supply, fixing and commissioning of wiring work from ARD to control panel with multistranded copper conductor cable of size 10 sqmm 4 core PVC insulated, unsheathed 1100 volts grade in proper colour coding including all necessary connected items such as Al thimbles, saddles nut bolts & washers etc complete all as specified and directed. Make of cable : Havells/Polycab/Plaza.

Taking down and supply & fixing cabin LED light 5/6 watt round type 12mm dia for lifts complete all as specified and directed.Make - Philips,Model No.919215850449 or equvalents of Bajaj/Havells.

Supply ,installing, testing and commissioning in replacement of Main drive 7.5 KW, 380/480 Volts, 50 Hz alongwith all connected accessories as per sample for Johnson lift of 8 Passengers. Make Emerson Control Techniques Unidrive / Yaskawa/Siemens/Fuji

Supply ,installing, testing and commissioning in replacement of Main drive 11 KW, 380/480 Volts, 50 Hz alongwith all connected accessories as per sample for Johnson lift of 13 Passengers. Make Emerson Control Techniques Unidrive / Yaskawa/Siemens/Fuji

M & L for machine cut kota stone of size 900 mmx75 mm and 800 mm x 75 mm, 20-25mm thick polished as in door strip over door sill, laid and jointed with chemical adhesive and edges shall be finished, moulded in full depth both side, finished and match on floor with white cement complete all a specifed and directed.

M & L for machine marble stone of any length and 75 mm width, 18-20 mm thick with polished as in door strip over door sill, laid and jointed with chemical adhesive and edges shall be finished, moulded in full depth both side, finished and match on floor with white cement complete all a specifed and directed.

Note for item No 01 to 37:- (i) The entire work shall be done through OEM's i.e any one of M/s Kone India/Schindler India Pvt Ltd/Kinetic Hyundai Elevator & Movement Technologies Ltd/Hitachi Lifts India Pvt Ltd/Mitsubishi Elevator India Pvt Ltd/OTIS Elevator Co. India Ltd/Fujitech India Pvt Ltd/ Johnson Lifts Pvt Ltd/Thyssenkrupp Elevator India Pvt Ltd/LT Elevators. (ii) The tenderer has to submit intent of MoU as per proforma given at Srl Page No 131 as Appx ‘A’ from any one of the OEM’s i.e any one of M/s Kone India/Schindler India Pvt Ltd/Kinetic Hyundai Elevator & Movement Technologies Ltd/Hitachi Lifts India Pvt Ltd/Mitsubishi Elevator India Pvt Ltd/OTIS Elevator Co. India Ltd/Fujitech India Pvt Ltd/ Johnson Lifts Pvt Ltd/Thyssenkrupp Elevator India Pvt Ltd/Omega Elevators/Escon Elevators Pvt Ltd/LT Elevators Pvt Ltd/IES Elevators for this effect at the time of bid submission. If it is found bonafide, then only the cover 2 will be opened for bonafide tender. The bid submitted without intent of MOU shall be rejected. (iii) Rates for all T&P required are deemed to be included in the quoted rates. (iv) Any damage done to the sensors/ drivers etc during dismantling will be replaced by the contractor at his own cost. (v) The contractor will have to submit MoU as per proforma given at Srl Page No 132 Appx ‘B ‘ from any one of OEM within seven days of acceptance of tender, failing which the contract will be liable to be cancelled and further action to be taken as per policy in vogue. (vi) For the entire work any particular lift shall not be shut down for more than 02 days for replacement of repair items. In case the lift is shut down for more than 02 days, a penalty of Rs 2000/- per day will be levied for each lift. A register for taking shut down will be maintained by Engr-in-charge. Only after approval by Engr-in-charge, lift will be shut down. After completion, endorsement of JE E/M in the register is must.

M/s Birja Nand

M/s Dhapola Elevator and Engineering