Repair renovation of Qtr No 09 block W at PHC Qammerwari Srinagar

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposed of dismantling material as directed at site of work by the EIC.

Dismantling W. c including P- trap, flushing cistern long bend etc and disposal of unserviceable material within 50 mtr lead all complete.

Dismantling / removing of old damaged G I / C I / PVC pipes including taking out the pipes manually, including stacking of pipes within 50 mtrs lead (150mm dia)

Demolishing cement concrete manually/ by mechanical means including disposal Of material within 50mtr lead. 1:3:6 or richer mix.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

15mm cement plaster on rough side of single or half Brick wall / concrete wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

Dismantling of doors, windows, C/S windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc complete and stacking with in 50 mts lead.(of area of 3 sq metres and below) including all carriages and cost of material involved.

Providing and fixing of wardrobe 2’-0” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)

Providing and fixing of Kitchen Almirah’s 1’-3” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board & back covering with 6mm water proof ply board and finishing with dulmica including all locking arrangements and hydraulic hinges of approved brand as per the directions of site Engineer. (complete Job)

Providing and fixing of wardrobe/ Almirah shutters of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board and finishing with dulmica including all locking arrangements and hydraulic hinges of approved brand as per the directions of site Engineer. (complete Job)

Providing and fixing of 12mm thick imported wooden paneling (T&G) including cost of 12mm thick ply wood base, touch wood polishing and nails etc all complete.

Providing and applying touch wood polish of approved brand and manufacture with two or more coats on new wood work including all carriages and cost of material involved.

P/F of 40mm x 40mm size wooden cornice of approved design of silver wood fixed with nails all complete.

Providing and fixing of imported wall paper of approved make, design and pattern including preparing of base, fixing all complete as directed by EIC.

Providing and fixing ceramic glazed wall tiles (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:3 (1 cement :3 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing ceramic glazed floor tiles 300x300 mm or above (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on wooden surface. including all carriages and cost of material involved.

Providing and fixing of 50x50 mm/2 thick wooden cornice of approved design including nails and screws all complete.

Providing and fixing of 19mm thick ply board of approved brand and manufacture including nails and screws all compete.

Providing and fixing of PVC pipes/ fittings of approved brand (Prince type-B) including trenching and refilling all complete.

100mm dia pipe

100mm plain bend

100mm door bend

100m collar

100mm floor trap

Providing and fixing of PPR pipes/ fittings of approved brand (type-B) including trenching and refilling all complete.

15mm Pipe

15mm Union

Providing and fixing of following C P fittings of approved brand and make (Parko) or equivalent including all complete.

Angle valve

Bib Cock

C P Nipple

C P Grating

C P Cup

Towel Ring

PVC connection 450mm long

Looking Mirror 1’-6”x2’-0”

Mirror cabnet

Glass shelve

Towel Rod

Soap case (Mirror type)

Shower Arm

Health faucet

Wall Mixer

Basin Mixer

Head shower

Concealed stop cock top

Sink Mixer

Tumbler holder

Mirror light

Towel Rack

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing of stainless steel curtain rods of approved make including brackets of approved design, screws all complete.

Providing & Fixing of ceiling fan (1200mm dia) of approved make like (Havells, Orient, Crompton) including all necessary fittings all complete Job.

Providing & Fixing of exhaust fan (300mm dia) of approved make like (Havells, Orient, Crompton) including all necessary fittings all complete Job.

Providing and fixing of following brass hardware fittings of approved make and design including screws etc all complete.

Handle 125mm long (Fancy type)

Bal catcher

Providing and fixing 35mm thick wire gauze shutters of deodar wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Providing and fixing of 300mm long door lock L/drop type of approved make like link, Godrej or equivalent make including necessary screws etc all complete.

M/S NISSAR AHMAD SHAH

SH. YOUNIS AHMAD MIR