REPAIR TO CHHAJJA, ROOF PLASTERING SUNKEN FLOOR SANITARY SERVICES AND MISC REP IN MD OFFRS, JCOs AND ORs ACCOMMODATION AT CHHEOKI

Amount

Demolition of brick work built in cm or cement lime mortar complete all as specified and directed at site.

M&L for brick work with subclass B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto as above items No 2 but except Brick work

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L for rendering 15mm thick in CM 1:6 on internal surfaces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick in CM(1:3) on ceiling surfaces to be finished even and smooth without using extra cement complete as all specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for first or premium quality non skid, ceramic “coloured” tiles of premium or first quality 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for first or premium quality of Glazed ceramic coloured digital tiles 200 mm x 300 mm or 300 mm x 450 mm x 7 mm thick, in vertical surface skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L for first or premium quality non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed

M&L for first or premium quality vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of wall and ceiling boards ( fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified

S&F of anodised aluminium snap grid frame work for ceiling icnl building boards all as specified and directed

M&L 4 mm thick for non -asbestos fibre cement building boards fixed or laid/inserted timber /GI/aluminium frame work with screws all as specified and directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

S&F for fibre glass reinforced translucent corrugated sheeting, 2 mm thick, with two corrugation side lap fixed with coach screw and washer in roof, wall etc. complete all as specified.

Dismantling of wrought or mild steel work of any description and in any position complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, crane gantaries, rails and fastening and heavy braket framing (beam, tee, angle, chanel or flat section) including distance peices etc conforming to Fe 410 W Gde E-250 complete all as specified and directed.

S &F steel work as in posts , wind ties, similar work and stays for gutter including securing with bolts and all necessary drilling bolting or riveting etc. conforming to Fe 410-0 or FE 310-0 Complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M & L PCC for 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed.

Demolition of cement concrete of any desription and in any position not otherwise specifically provided for complete all as specified and directed. .

M&L for PCC 1:2:4 type B1, using (20 mm graded agg) ,40 mm thick as in roof to floors & pavings all as specified & directed

M & L for cement concrete type E2 1.5.10 using 40 mm graded aggregate as in lean concrete.

M & L for 15 mm thick rendering in cement mortar 1:3 on fair faces of brick or concrete surfaces finished ceven and soomth without using extra cement and using with 3% water proofing compound complete all as specified and directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate 1.2 Kg per Sqm incl cleaning surfaces complete and as directed by the Engr-in Charge

Supply only integral water proofing compound

Demolition of reinforced cement concrete as in roof,floors(other than groung floor) beams,stairecase, landing,chajjas and similar works suspended works

Demolition of brick tiles or terracing tiles, single layer on roofs all as specified

Demolition of mud/lime in roofs,any thickness,including plastering and leaping(whether full thuickness removed or only a part thereof)

M&L for reinforced cement concrete type B-1(20 mm graded aggregate) as in chajjas, fins ,facias, louvers,parapets and railings exc 60 cm in height, newels, balustrade and the likes all as specified and directed.

M&L for Dubbing out average 15mm thick in cement mortar 1:4 on irregular faces of walls,chhajjas etc ,complete all as specified and directedS

M&L for rendering 15 mm thick in CM 1:3 for repair to chajja, ceiling etc; surface finishes finished even and smooth without using extra cement all as specifie

M&L for brushing neat cement slurry with 3.0Kg of cement per Sqm complete all as specified and directed

M&L Cutting out cracks to V- section in existing roof or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1(by weight)complete all as specufied

M & L for water proofing treatment to RCC roof slab incl parapet comprising with the following course of treatment/specifications from bottom to top :- (a) Applying bituminous primer @ 100 grm per Sqm over plastered surfaces of roof incl parapet surfaces. (Make : Tank Mastic of STP Ltd or EMUFALTE of Texsa India Ltd/IWL India Ltd) (b) One layer of APP based polymeric membrane of approved manufacturer,3mm thick, weight not less than 3.60 kgs per sqm, reinforced with non woven polyester fabric or weight not less than 150 grm per sqm. Polymeric membrane shall taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note: (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions. (iii) The make of polymeric membrane shall be SUPER THERMOLY of STP Ltd or MOPLY FP of Texsa India Ltd./IWL India Ltd) (c) Applying two coats of bituminous aluminum paint on top of APP membrane.

Dismantling AC (Corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed

S & F 6 mm thick asbestos cement corrugated sheet in roof fixed with 'L' or 'J' type hook or crank bolts complete all as specified and directed.

-Ditto- all as per srl item No 45 above but except sheet complete all as specified and directed.

S&F AC two piece adjustable serrated ridge for corrugated sheets in roof coverings, fixed with 'L' or 'J' hook complete all as specified and as directed

M&L for mild steel TMT bars 6 to 8mm dia and over cut to length , bent to shape required including cranking bending etc and binding with mild steel wire (annealed ) not less than 0.90 mm dia as in reinforcement complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length , bent to shape required including cranking bending etc and binding with mild steel wire (annealed ) not less than 0.90 mm dia as in reinforcement complete all as specified and directed.

M&L for closing bolt holes etc, in old corrugated steel sheets or aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm GI bolts and nuts, all set in stiff white lead, bolt n exc,25mm in length all as specified and directed.

Demolition of stone slab and tiles of any description and thickness in floors, apron etc. laid ,bedded and pointed in any mortar .

M&L for machine cut kota stone slab flooring 18-20mm thick over cement 15mm thick 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting,dado and pillars laid over cement 15mm thick screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 all as specified.

M&L for fixed in repair 18/29 block boards, grade 1 quality interior grade, decorative type with decorative with decorative face veneer on one face fixed with screws to timnber frame work complete all as specified and directed.

M&L for fixed in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed

Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, chennels, plates etc. including welding, grinding, buffing, polishing and making curvature( whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of floor or the side of waste slab with suitable arrangement fixed in repair complete all as specified and directed

M&L for providing cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in roof kerbs or mud stopa, rounded or chamfered on edges incl form work complete all as specified and directed

M&L for cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels, upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses,parapets,and railings upto 60cm in height,coping kneelers,apex stones, bed plates, ,water troughs, and the like including weathering,slightly rounded or chamfered angles and throsting including form work as directed

M&L for pre- cast cement concrete type B1 , 1:2:4, using 20mm graded aggregate set in cement mortai 1:6 as in landings,cover slabs,(for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articles with plain facescomplete all as specified and directed

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifided and directed

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F in repair Aluminum anodized single leaf door with shutter of frame size 101.60x44.45x1.50mm. The shutters having vertical stiles of size 83.50x44.45x1.5mm top and bottom rail of size 114.30x44.45x1.5mm and middle/ lock rails of size 83.50x44.45x1.50mm .The glazing shall be done with 5.0mm thick glass as approved by GE and shall be fixed with glazing clip of size 18.20x16.60x1.0mm complete and the each shutter shall have the following provisions complete all as specified and directed:- (a)Handle 100mm dia disc type-02 Nos (b) Lock 6 levers -01 No (c) 200mm long tower bolt- 01 No (d)Floor spring heavy duty ISI marked of suitable size -01 No

S&F in Aluminum anodized sliding windows with aluminum track section of size 62x30x1.20mm and shutter section of size 40x18x1.20mm sliding with nylon roller glazing with 4mm thick laminated glass/ non transparent glass glazing handle cleats and locking arrangements incluiding Aluminium expended Grills thickness 5.50mm and Stainless steel wire mesh 1.48 mm aperture etc completre all as per specified and directed by Engineer-in-charge.

S&F in repair steel window box type prmer comrising ERW Hollow 'P' section of size 60 x 25mm of 1.25 wall thick frame angle rebated Skelton shutter made of ERW section 50 x 20mm of 1mm wall thickness and operated leaf side huge with two No's sash bars of "T" section 20 x 30 mm welded to frame of shutter and openable shutter prepared to receive sheet glass complete including cutting holes four prepared to receive sheet glass complete including cutting holes four Nos for each window and making good dismantling poriton in PCC (1:2:4) TYPE B-1 including following fittings welded to frame/shutter :- (a) Hold fast 150mm out of 25x6mm flat iron made to shape 04 Nos for each window (02 Nos on each side). (b) Handle of 'Z' Section 20mmx25mm, 100mm long 01 No for each leaf. (c) MS tower bolt 150mm long - 02 NOs for each leaf. (d) 'Z' section 20 x 25mm, 100 mm long stopper 01 No for each leaf. (e) Cleat 55mm long of Hollow square section 15mm x 15mm of 24 gauge wall thickness. Welded to hinge of 55mm size 01 No for each leaf. (f) MS box type hinges of 75mm size - 03 Nos for each leaf. (g) Fabrication & fixing complete. Note. Glass panes & painting shall be measured & paid separately.

dittoall as per item No-68 without sash bar to recieve wire gauge. Note:- Wire gauge & painting shall be measured and paid separately.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including p or s trap and provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc complete.

S&F in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed

S & F in repair PVC syphonic action type flushing cistern 10 lit capacity with complete internal kit including bracket fixed in repair (including flushing pipe complete) of make as specified.

S & F in repairs stop valve cast copper alloy screwed down for high pressure with crutch or butterfly handles screwed both ends for iron pipe and fixed for 15 mm bore pipe

M&L for broken glass coping using glass @ 14 Kg per sqm in top of wall in cm 1:3 completeincluding taking down all as specified and directed

S&F in repair standard stainless steel grating doom round 125mm size with waste hole(minimum wt 40 gms) complete all as specified and directed.

Taking down chowkats or frames with shutters (without takinf off shuttersfrom the frame not exc 1.5 sqm each all as specified and directed

Taking down chowkats or frames with shutters (without takinf off shuttersfrom the frame exc 1.5 sqm but not exc. 4.0Sqm each all as specified and directed

Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame not exc 1.5 sqm each all as specified and directed

Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but not exc 4.0 Sqm each all as specified and directed

Taking down shutters of any description not exc.1 sqm each all as specified and directed

Taking down shutters of any description exc.1 sqm not exc. 2 sqm each all as specified and directed

Resecuring or easing& adjusting without taking down of shutters exc. 1 Sqm but not exc 2 sqm each complete all as specified and directed

Resecuring or easing & adjusting without taking down of shutters not exc. I sqm each complete all as specified and directed

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC reinforced with MS square tube,supplying and fixing in opening as per specification and drawing complete all as specified and directed

S&F of factory made solid panel PVC door shutter 30mm thick (style) consinting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails& bottom rail on either side & as gap insert for top rail& bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to ythe style and rail with suitable PVC sheet,beading and joined together with solvent cement supplying and fixing in the frame at site as sper specification & drawing complete all as specified and directed

S&F IInd class hard wood as in plain solid, straight chowkats and frames,wrought,framed rebated on the solid,rounded, or chamfered,put together with glue pinned at joints

S&F of IInd class hard wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass, gauge,etc,(without sash bars) edges of framimng plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR part -I section 8,clause 8.24(a) complete all as specified and directed

S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick second class hard wood, plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated .

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on new wooden surfaces of any description overa coat of primer

S&F of framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings ,framework of water tanks and similar works conforming to Fe-290 gde E-165 complete all as specified and directed

S & F extruded aluminium alloy handles fabricated type anodized 150 mm size.

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge pin anodized type C-21 complete all as specified

M&L mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long .

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs rotational moulded, multilayer HDPE water storage tank of 500 ltrs capicity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,incl 20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball ( of minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc. complete all as specified and directed

S&F in repairs rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capicity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,incl 20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball ( of minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc. complete all as specified and directed

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia with new fittings complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia with new fittings complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 250 & n. exc 500 litres and from mouths of circulating pipes, etc complete all as specified and directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 & n. exc 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repairs Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) as fixed in repair

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm , fixed in repairs complete all as specified and directed. Make: Nirali/ Blue Star/ Jayna/ Nilkanth.

S&F of 25 mm dia MS PVC coated Drapery rod with bright polish of superior quality incl finols accessories etc fixed in repair complete all as specified and directed

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling and waste pipe complete all as specified and directed.

S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 450mm long with 2 Nos PTMT nuts, complete all as specified.

S&F in repair vitreous china counter top wash basin, white oval type of size including 32mm dia chromium plated waste coupling and waste pipe and including swan neck fancy type CP pillar cock complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Taking down PVC pipe of any size or pattern including all fitting head, shoe, band, swan neck etc all as specified & directe by Engineer-in-Charge.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110mm bore complete all as specified & directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid in trenchs or floor 110mm bore complete all as specified & directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified & directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid in trenchs or floor 75 mm bore complete all as specified & directed.

S&F PVC (SWR) bends any radius, 110mm bore complete all as specified & directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified & directed.

S&F PVC (SWR) Junnction single (T) equal or unequal 110mm dia.

M/S Jai Santoshi Const Co.

SUNIL ENTERPRISES

Vibha Enterprises