Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.4 LAccepted-AOC BAIRGOCHH P O CHATHAT DIST DARJEELING W B | CHATHAT | DARJEELING | WEST BENGAL | 734434 | 1 | Accepted-AOC Due to credit and L-1 | |
| 2 | 2₹13.7 L+₹18,380 (1.36%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹13.7 L+₹21,521 (1.59%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹15.0 L+₹1.5 L (10.9%)Rejected-Finance | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹19.1 L+₹5.5 L (40.8%)Rejected-Finance 29 7 KACHERI ROAD NEAR DISTRICT HOSPITAL PRATAPGARH PRATAPGARH UTTAR PRADESH 230001 | PRATAPGARH | UTTAR PRADESH | 230001 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
WELCOME MAINT OF SMQS IN 4 AREA AND MAP PH II ACCN UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA
2023_MES_597435_1
8000-2050/E8
Open Tender
Civil Works - Others
Item Rate
335 days
AF Station Agra
Class E
cat a i
8 documents required · 8 mandatory
₹500
GE AF Adm Area Kheria Agra
₹40,000
Yes
23 Jun 2023
22 May 2023
19 Jun 2023
22 May 2023
17 Jun 2023
5 Jun 2023
22 May 2023 - 3 Jun 2023
Amount
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
M&L for rendering 15 mm thick in two layers of 10+5 mm in CM 1:4 mixed with Pidi Proof 101 LW(+) of Dr fixit or equivalant intergral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equilvalant in the ratio (1:4:7), (one part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture /Sqm in two coats and finish the surface even and smooth (without using extra cement) for external walls complete all as specified and directed. Note:- Pidi proof and super latex to be measured and paid separately as supply only.
M& L for rendering 15 mm thick in two layers of 10 + 5 mm in CM 1:6 mixed with Pidi Proof 101 LW(+) of Dr fixit (Pidilite) or equivalant intergral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equuilvalant in the ratio (1:4:7), (one part super latex, 4 part water and 7 parts of cement) @ 1.5 Kg of homogenious mixture /Sqm in two coats and finish the surface even and smooth (without using extra cement) for internal walls complete all as specified and directed. Note:- Pidi proof and super latex to be measured and paid separately as supply only.
Supply only Pidi proof 101 LW (+) of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
Supply only super latex 302 of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
M&L for dubbing out 10 mm thick average thickness in cement mortar 1:4 on irregular face of wall/ceiling cement complete all as specified and directed.
M&L for 5 mm thick rendering in CM (1:3 ) on ceiling finished even & smooth without using extra cement complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over a coat of clearcholle primer on new surfaces of walls including preparation of surface complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on new surface of brick (plastered or unplastered surface) or concrete surface complete all as specified. Note :- (i) Primer and emulsion to be carried out through air less spray machine (mechanial means). (ii) Second coat will be applied after first coat is completely dried i.e approximately 6-8 Hrs after applying of first coat.
M&L for preparation of old plastered or unplastered surface of wall including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying two coat of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying two coat of white wash complete all as specified and directed.
M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparing old painted surface of steel/iron of any description area not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparing old painted surface of steel/iron/CI pipes of any description area exceeding 10cm width or girth and applying one coat of black bituminous paint complete all as specified and directed.
M&L for complete removal of existing treatment and applying wall care putty 1 mm thick for smooth finish complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on prepared surface of brick (plastered or unplastered surface) or concrete surface complete all as specified. Note :- (i) Primer and emulsion to be carried out through air less spray machine (mechanial means). (ii) Second coat will be applied after first coat is completely dried i.e approximately 6-8 Hrs after applying of first coat.
M&L for cutting out cracks to 'V' section in existing beams/columns and preparing the surfaces as per manufacture's instruction and applying cementitious water proof crack repair mortar (CRACKSEAL) or equivalent make complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement including demolition of cement concrete as in floor complete all as specified and directed.
M&L for 75mm thick cement concrete type C-1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction including demolition of existing plinth protection complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300 x 200 x 6-7 mm/ 450 x 350 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
Renewing glazed/non skid ceramic tiles in patches area n exc. 5 Sqm including preparing the beds and laying of old or new tiles setting jointing and pointing etc to match with the existing surfaces complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately.
S&F Structural steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410-W (Gde E-250) complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded feathred edges colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour feathred edges PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
M&L for welding in repair n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed.
S&F 100mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F alumunium handle, cast type, anodised 125 mm long ISI marked complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair 15 mm dia chromium plated brass central hole wash basin mixer with accessories in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair CP/ S.S jet nozzle (jet spray) for pedestal pattern EWC with upto 1 m long flexible pipe, S.S triangular plate and CP brass nuts and washer etc. complete all as specified and directed.
S&F in repair drapery rod fancy type, made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish, plastic finial of 28-29 mm bore, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.
S&F in repair brass spindle suitable for bib tap/ pillar tap/ wall mixer/ basin mixer complete all as specified and directed.
S&F in repair rubber washer suitable for flushing cistern complete all as specified and directed.
S&F in repair PVC float valve suitable for flushing cistern complete all as specified and directed.
S&F in repair PVC semi rigid waste pipe 32 mm dia with socket minimum 700 mm long for WHB/ sink/ urinal complete all as specified and directed.
C P Singh and Co
M/s Pooran Singh and Company
M/s K S Builders
M/S SINGH ELECTRIC CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .