Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-Finance | ₹3.0 L | L1 | Accepted-Finance L1 |
| 2 | L2₹3.2 L+₹22,832.55 (7.70%)Accepted-Finance LOCATION HIMACHAL PRADESH HP | SIRMAUR | HIMACHAL PRADESH | 171226 | ₹3.2 L+₹22,832.55 (7.70%) | L2 | Accepted-Finance L2 |
| 3 | L3₹3.2 L+₹24,527.97 (8.27%)Accepted-Finance R O VPO SAMOR TEHSIL DHARAMPUR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | ₹3.2 L+₹24,527.97 (8.27%) | L3 | Accepted-Finance L3 |
| 4 | Not Admitted-Fee/PreQual/Technical C O MADAN MOHAN BUILDING TOTU SHIMLA 11 TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | - | - | Not Admitted-Fee/PreQual/Technical Others-Bid not submitted by the bidder physically on due date and time. |
| Sl No | Description | Qty | Unit | Rakesh Saklani L3 | KAUSHAL TRADING CO L1 | abhishek guleria L2 |
|---|---|---|---|---|---|---|
| 1.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge ( Bricks will be supplied by the college free of cost). | 6.79 | Square Metre | 490 ₹3,327.1 Lowest | 610 ₹4,141.9 | 600 ₹4,074 |
| 2.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. | 11.08 | Square Metre | 1,350 ₹14,958 | 1,100 ₹12,188 Lowest | 1,200 ₹13,296 |
| 3.00 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. ( hold fast lugs or dash fastener shall be paid for separately. a).Sal wood | 0.04 | Cubic Metre | 1,15,000 ₹4,830 | 1,15,000 ₹4,830 | 1,05,000 ₹4,410 Lowest |
| 4.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 1.89 | Square metre | 2,500 ₹4,725 Lowest | 2,800 ₹5,292 | 2,700 ₹5,103 |
| 5.00 | Providing and fixing ISI marked oxidised / chromium plated M.S. sliding door bolts with nuts and screws etc. complete :etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 300x16 mm (three hundred into sixteen milimetre) | 1 | Each | 220 ₹220 Lowest | 300 ₹300 | 300 ₹300 |
| 6.00 | Providing and fixing ISI marked oxidized / chromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 200x10 mm(two hundred into ten milimetre) | 2 | Each | 72 ₹144 Lowest | 90 ₹180 | 75 ₹150 |
| 7.00 | Providing and fixing ISI marked oxidized/ chromium plated M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a).125mm (one hundred twenty five milimetre) | 2 | Each | 40 ₹80 Lowest | 60 ₹120 | 50 ₹100 |
| 8.00 | MS tube (Square/ Rectangular) work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 314.51 | Kilogram | 125 ₹39,313.75 | 115 ₹36,168.65 Lowest | 125 ₹39,313.75 |
| 9.00 | Structural Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 469.8 | Kilogram | 110 ₹51,678 | 105 ₹49,329 Lowest | 115 ₹54,027 |
| 10.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.32 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindel/ JSW make) | 143.96 | Square Metre | 850 ₹1,22,366 | 705 ₹1,01,491.8 Lowest | 800 ₹1,15,168 |
Tender Value
₹2.3 L
EMD Value
₹4,600
Closing Date
16 Sept 2026, 10:00 amClosed
Executive Engineer (Const.)
Estate Organization, Dr YSP UHF, Nauni, Solan
Renovation of Girls Hostel at College of Horticulture and Forestry Neri, Hamirpur
2026_YSPU_142797_1
UHF/Const.-1/-1174.5 Dated 02.09.2026
Open Tender
Civil Works
Item Rate
90 days
Neri
Please refer Tender Document
5 documents required · 5 mandatory
₹700
Executive Engineer, Design
₹4,600
16 Sept 2026
5 Sept 2026
16 Sept 2026
5 Sept 2026
16 Sept 2026
5 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge ( Bricks will be supplied by the college free of cost). | 6.79 | Square Metre | 407.5 | ₹2,766.93 |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. | 11.08 | Square Metre | 747.65 | ₹8,283.96 |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. ( hold fast lugs or dash fastener shall be paid for separately. a).Sal wood | 0.04 | Cubic Metre | 95,763.05 | ₹4,022.05 |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 1.89 | Square metre | 1,695.5 | ₹3,204.5 |
| 5 | Providing and fixing ISI marked oxidised / chromium plated M.S. sliding door bolts with nuts and screws etc. complete :etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 300x16 mm (three hundred into sixteen milimetre) | 1 | Each | 173.1 | ₹173.1 |
| 6 | Providing and fixing ISI marked oxidized / chromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 200x10 mm(two hundred into ten milimetre) | 2 | Each | 56.5 | ₹113 |
| 7 | Providing and fixing ISI marked oxidized/ chromium plated M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a).125mm (one hundred twenty five milimetre) | 2 | Each | 32.4 | ₹64.8 |
| 8 | MS tube (Square/ Rectangular) work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 314.51 | Kilogram | 107.45 | ₹33,794.1 |
| 9 | Structural Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 469.8 | Kilogram | 107.45 | ₹50,480.01 |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.32 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindel/ JSW make) | 143.96 | Square Metre | 409.75 | ₹58,987.61 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_212100.xls
BOQ • 0.32 MB
Tendocu.pdf
Tender Documents • 5.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .