Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.9 LAdmitted-Finance | -31.77% | ₹2.9 L | L1 | Admitted-Finance |
| 2 | L2₹3.0 LAdmitted-Finance | -27.91% | ₹3.0 L | L2 | Admitted-Finance |
| 3 | L3₹3.1 LAdmitted-Finance | -25.59% | ₹3.1 L | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical Non-responsive |
Updated dates
Tender Value
₹4.2 L
EMD Value
₹8,400
Closing Date
29 Jan 2026, 3:00 pmClosed
Executive Engineer RNb Dalgate DIvision Sgr
Executive Engineer RNb Dalgate DIvision Sgr
Major Repairs at Boys High School Sonwar Srinagar
2026_PWDJK_300838_2
Nit-77e-tend/2025-26/11620-28 dtd.16-01-2026
Open Tender
Civil Works
60 days
Sonwar Srinagar
as Per Nit
2 documents required · 2 mandatory
₹200
Executive Engineer RNb Dalgate DIvision Sgr
₹8,400
2 Feb 2026
16 Jan 2026
30 Jan 2026
17 Jan 2026
29 Jan 2026
17 Jan 2026
Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area below 40 sqcm.
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto all levels. Thermo mechanically treated bars of grade. Fe-500D or more complete.
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Brick work in clay fly ash (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level and curing complete in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second kail wood.
Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood.
Providing and fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 kg/sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
Providing and fixing bright finished brass handles with screws etc. complete :
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :
15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 ( 1 cement : 4 fine sand)
Dismantling roofing including ridges, hips valleys and gutters etc and stacking the material within 50 meters lead of GS sheet.
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood.
Providing and fixing precoated galvalume sheets 0.50mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings, Valleys and ridges of colour coated galvalume plain sheets using self drilling and self tapping fastenersof reputed make complete and as directed. The contractor shall give a minimum of 10 year guarantee for sheets against deterioration, disintegration loss of luster, variation in colour, etc and leakage across laps, fasteners etc. all types of steel sheets shall be load tested to satisfy 1:10 time the design wind load and coating thickness to the satisfaction of EIC. Fasteners shall also be load tested the contractor is to submit design and shop drawing for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads lifts and carriages etc upto site of work complete) High rib colour coated.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm.
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Agaria White.
Extra for pre finished nosing to treads of steps of marble stone
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931.
Providing and fixing Basin mixer double spout single lever jaguar type.
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.
Providing and fixing CP brass soap case heavy.
Providing and fixing CP brass waste for wash basin 32mm dia.
Providing and fixing PVC connection for cistern / wash basin / Geyser / urinal etc 450 to 6mm long.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore.
Providing and fixing 3 layer PPR pipes stablised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PPR plain and brass threaded PPR fittings including cost of cutting, cleaning and testing of joints complete internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
a) PN-16 pipe, 25mm OD (SDR-7.4)
b) Al drop 300mm.
Providing and fixing 15mm nominal bore C.P brass angle valve for mixer and geyser points of approved make conforming to IS: 8931
Providing and fixing of PVC pipes and pipe fittings approved (B Type) including bends, elbows, Traps included (as per Engineer in charge)
Providing and fixing sink mixer in kitchen wall with all necessary fittings complete job.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm
Providing and fixing of PVC false ceiling of 5mm with necessary fitting including aluminium frame complete job.
Providing and fixing of 10mm plyboard included frame work complete job.
Engagement of carpenter and labour for easing of Doors and windows and minor repairs wherever required including cleaning / removing of old glass panes including disposal of unserviceable material as directed by the EIC.
a) Carpenter.
b) Labour.
Engagement of plumbers, black smith and helpers for removing old / damaged sanitary items, damaged pipes aluminium doors / partitions etc cincluding stacking of serviceable material and disposing of unserviceable material as directed by the EIC.
a) Plumber.
b) Helper.
Carriage of materials from source to site of work by mechanical means.
a) Sand for an avg. lead of 20 Kms.
b) Aggregate for an avg. lead of 20 Kms.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.50 MB
BOQ_975892.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid