PROVISON OF LEDISATION (STREET LIGHT) AT SECUNDERABAD UNDER GE(UTILITY) SECUNDERABAD

Amount

Taking down street light fittings of any watt and type from existing position on pole/ wall/ tower, and segregate the serviceable light for depositing to store complete all as specified and directed

Taking out unserviceable junction boxes of any type or size for replacement from pole/wall and removing the same from site complete all as specified and directed

Taking out unserviceable service connection of any type or size for replacement from pole/wall/ OH conductor and removing the same from site completeall as specified and directed

Taking down old unserviceable post top lantern/bollard / Garden/ Gate light fitting of any watt and type from existing position complete for repair and replacement all as specified and as directed

Taking down street light bracket of any size from any kind of pole including clamps complete all as specified and directed.

Supply, fixing, connecting and testing energy saving, environmental friendly long life Varsatile pressure die cast aluminium alloy for housing (heat sink) with IP66 protection road way light fitting with high power LED as light source of capacity 60 watts with warranty option of 2 years with suitable driver and cable gland for maintaining ingress protection with Epoxy powder coated siemens grey finish after phosphochromate treatment, Tempered protective toughened glass,thermal shock and impact resistant fixed to the housing with SS screws , High efficiency long life LED chip in modules with lumen efficacy of >140 lm/W with PC lens and system lumen 6000. Powered by Built-in electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection. CCT 5700, CRI>70, THD<10%, PF>.95, IP66, IK07.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +50 DEG.C; Input Supply Voltage Range:140-270 V, Frequency : 50-60 HZ, Driver safety requirement standards :IS 15885-2-13, Test report to be submitted for Driver performance requirements as per IS 16104, for Photo bilogical safety norms as per : IS 16108, Certification as per LM 79 for Luminaire , LM 80 for LED Source, with all standard accessories etc, including connection by using 3 core 1.5 sqmm HV Round Cable complete all as specified and as directed. Make: Make Philips Model number BRP062 LED 65 CW SLA S1 PSU or Havells Cat No. ENDURAPEARLNEOSL60WLED757PASYTOPC or Wipro cat No. LR02-671-XXX-57-G2 or equivalent make as mentioned in makes list in PS

All as per item No.6 above, but 70/72 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: Make Philips Model number BRP062 LED 84 CW SLA S1 PSU or Havells Cat No. ENDURACITYLINERNEOSL70WLED757PASYBOTG, SURYA CAT NO: SLEUL72W IP66 PLX XL or Wipro cat No. LR02-781-XXX-57-G2 or equivalent make as mentioned in makes list in PS

All as per item No.06 above, but 90 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make Philips Model number BRP409 LED 115 CW SLC FG PSU GR V2 or Havells Cat No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO, SURYA CAT NO: SLEUL90W IP66 PLX XL or Wipro cat No. LR02-102-XXX-57-G2 or equivalent make as mentioned in makes list in PS

All as per item No. 06 above but Flood light of high power LED as light source of capacity 100 watts. Make: Make : Havells Model Number JETAIRISFLS 100WLED757APWBLT G, SURYA CAT NO SLEFL100 W IP66 LUMOS MAX or Wipro cat No. LF20-122-060-57-G2 OR CG MODEL No : CFS-504-100-30-60D-SL-GL-NSG or equivalent make as mentioned in makes list in PS

All as per item No. 06 above but Flood light of high power LED as light source of capacity 120 watts.. Make: Make : Havells Model Number JETAIRISFLS 120WLED757APWBLT G, SURYA CAT NO SLEFL120 W IP66 LUMOS MAX or Wipro cat No. LF20-132-060-57-G2 OR CG MODEL nO LFLN-120-CDL/60-M or equivalent make as mentioned in makes list in PS

All as per item No. 06 above but Flood light of high power LED as light source of capacity 150 watts.. Make: Make : Bajaj Cat No.BARFEG 150W LED or Havells Cat No. JETAIRISFLS150WLED757PSYMLTG, SURYA CAT NO SLEFL150 W IP66 LUMOS MAX or Wipro cat No. LF20-192-060-57-G2 OR CG MODEL nO LFLN-150-CDL/60-M or equivalent make as mentioned in makes list in PS

All as per item No. 06 above but Flood light of high power LED as light source of capacity 200 watts.. Make: Make : Havells Model Number JETA VALOURFL200WLED757PINTWBLT G, SURYA CAT NO SLEFL200 WATT IP66 LUMOS II or Wipro cat No. LF20-272-060-57-G2 OR CG MODEL nO LFLN-200-CDL/60-M or equivalent make as mentioned in makes list in PS

Notes for item Nos 06 TO 12 :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection (In-built) of the drive shall not be less than 10 KV (iv) Connection of lights to be given by using 3 core 1.5 Sq m copper wire . quoted rated inclusive of up to 3 m wire against each light . (v) Street lights and flood lights up to 120 watt are to be fitted on pole of height 9 to 11 m. Quoted rates inclusive of all arrangement required for trhe same. (vi) flood lights 150 watts and above are to be fitted on High mast pole of height 12.5 to 20 m m. Quoted rates inclusive of all arrangement required for the same

Supply, fixing, connecting and testing post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity 1X15/20 watts, fixed on the top of gate piller complete all as specified and directed. Make:- CG MODEL NO LPTH 20 CDL / Havells Cat No. RUBYMINIPT15WLED757PSYMTOPC or Wipro cat No.LP07-2511-XXX-57-CL or equivalent make as mentioned in makes list in PS

Supply, fixing, connecting and testing post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity 1X35/36/ 40 watts, fixed on the top of gate piller complete all as specified and directed. Make:- PHILIPS Cat Part No BGP300 LED28 757PSU PC IN S1 or CG MODEL NO LPTO 40 CDL/ Surya model nO : SLEPT 36 W - ETPP / Havells Cat No. RUBYPT35WLED757PSYMTOPC or Wipro cat No.LP07-431-XXX-57-CL or equivalent make as mentioned in makes list in PS

Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit exclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, 3 sets of clamps of suitable size for supporting on pole etc complete all as specified. Note: The above mentioned wire to be used for connection of lights from Junction box. Quoted rates inclusive of clamps of suitable size required for the same .

S & F Hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts, 32 Amps made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs and glands, fixied on pole by means of 2 sets of clamps made out of MS flat iron of size 25 mm x 3 mm icomplete all as specified and as directed. Make: Hensel/Syntex/C&S

Supply and replace GI pipe fixed on the top of gate piller by 50 mm dia medium grade GI pipe of length 30 cm( 20 CM inside the piller and 10cm above the piller ncluding necessary cement work and making hole on GI pipe if required complete all as directed. Note: Quoted rate inclusive of making good of dosturbed suface including necessary painting to match with the adjoining surface.

S&F Fabrication and installation of GI pipe bracket on any kind of pole made of midium Grade tubing of size 40 mm dia, duly bended by hot forgoing after filling of sand, length 1.20 mtr including providing two pair of MS flat strip clamps 40 mm x 4 mm with GI bolts nuts and washer complete all as specified and directed

Supply and fixing lantren of dia 60 CM for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole / SP -55 11 m steel pole , made of MS pip medium grade dia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nos including two coat of aliminium painting over a coat of redoxide primer complete all as directed

Supply and laying on pole for street light timer connection 1100 Volts Grade Heavy Duty Electric Cable with XLPE insulated Aluminium Conductor served with an inner Sheathing of PVC Tape armoured with Galva-nised Steel Strip/wire armoured and overall PVC sheathed, Nominal Cross-Sectional Area as under incl connecting by using cable lugs and Testing, complete all as specified and as directed of breaking capacity 10 KA complete including necessary clamp as required for fixing on pole / walll complete all as directed including taking down old one . NOTE: rate quoted by the contractor is inclusive of cable connection on both end including necessary lugs required at one end only

(a) 2 core, 10 sqmm cross sectional area

(b) 4 core, 10 sqmm cross sectional area

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 6.0 Sqmm for connection of light complete all as specified and directed

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of light complete all as specified and directed

M/L for cross arms, bracing, supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including disconnecting/taking out old existing unsv cross arms and to be used for fixing of flood lights complete all as specified and directed.

Dwarka Pershad Radhey Ramanlal

Sri Associates

omsai thermax engineers

Maruthi international

SHRI GANESH ENTERPRISES

STANDARD AGENCIES

M Laxmana Rao and Sons

M/s RAMA LAKSHMI CONSTRUCTIONS