Procurement of General Boiler spares and tube shield for Boiler-BTPS 1X500 MW Unit-DVC

HALF ROUND TUBE SHIELD FOR WW SCREEN TUBE OD:63.5MM- TUBE SHIELD :R=32MM, L=1500MM,T=3.0MM, MATERIAL: SS304

HALF ROUND TUBE SHIELD FOR LTSH TUBE OD:47.63MM- TUBE SHIELD:R=24.5MM, L=1500MM,T=3.0MM, MATERIAL: SS304

Half Round Shield For LTSH,Type- III for Tube- 47.63 X 5.6 MM, SS304

Half Round Shield For LTSH,Type- IV for Tube- 47.63 X 5.6 MM, SS304

Half round tube shield for BP screen tube bend near roof, R-26mm, L-280mm,thickness-3mm, Mat:SS304 (for BP screen tube dia. of 51mm)

Half round tube shield for WW screen tube bend near outlet header, R-32mm, L-280mm,Thickness-3mm, Mat: SS-304 (for WW screen tube dia. of 63.5mm)

Locking clamp for Economiser coil, Mat: SS304

Locking clamp for LTSH coil, Mat-SS304

Cassette baffle Economiser coil (lower),Mat:SS304

Cassette baffle Economiser coil (upper), Mat: SS304

Cassette baffle LTSH coil (lower),Mat:SS304

Cassette baffle LTSH coil (upper),Mat:SS304

Clip for tube shield of tube dia 47.63mm, Mat:SS304

Clip for tube shield of tube dia 51mm, Mat:SS304

Clip for tube shield of tube dia 54mm, Mat:SS304

Clip for tube shield of tube dia 63.5mm, Mat:SS304

FIN FOR SCW SIZE : 96.2 MM X 6MM (Material:IS2062GrA)

FIN FOR SCW SIZE: 102.4 MM X 6 MM (Material:IS2062GrA)

FIN FOR SCW SIZE : 64.1 MM X 6MM (Material:IS2062GrA)

FIN FOR SCW SIZE : 89.8MM X 6MM (Material:IS2062GrA)

FIN FOR WATER WALL: 12.7MM X 6MM (Material:IS2062GrA)

Tube cap for tube OD 51, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 38.1mm, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 47.63mm, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 54mm, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 63.5mm, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 44.5, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Tube cap for tube OD 57mm, Length 50mm, Thickness 1.5mm, Material-LLDP(Linear low density polyethylene)

Scallop Bar, L-1517.6mm, Pitch-152.4mm,Radius of groove-33mm, Total no. of grooves-10nos., Thickness-6mm, Width-100mm, Mat: IS2062GrA

Scallop Bar, L-1250.6mm, Pitch-139.7mm,Radius of groove-26.5mm, Total no. of grooves-9nos., Thickness-6mm, Width-100mm, Mat: IS2062GrA

Scallop Bar, L-1249mm, Pitch-127 mm,Radius of groove-33mm, Total no. of grooves-10 nos., Thickness-6mm, Width-100mm, Mat: IS2062GrA

Scallop Bar, L-1777.5mm, Pitch-63.5 mm, Radius of groove-26.5mm, Total no. of grooves-28 nos., Thickness-6mm, Width-100mm, Mat: IS2062GrA

Scallop Bar, L-1523.5mm, Pitch-63.5 mm, Radius of groove-26.5mm, Total no. of grooves-24 nos., Thickness-6mm, Width-100mm, Mat: IS2062GrA

U clamp of LTSH coil, Mat: SS304

SS plate, Mat: SS304, Size: 1000mmx50mmx6mm

Woven Wire Mesh, Mat-SS, AISI-304, Aperture-3mm, Wire Dia-1.2mm, Approx Open Area-51%

SS rod, Dia. 10mm, Mat- SS 304

M.S SEAMLESS PIPE WITH PLAIN ENDS CONFORMING TO ASTM A-106 GRADE-B RANDOM LENGTHS 4 TO 7 METER NOMINAL DIA:3", SCHEDULE 40,OD :88.9 MM, THICKNESS :5.49MM

NON-METALLIC ASBESTOS CLOTH (WEBBING TAPE) SIZE : 50 MM WIDE X 3 MM THICK

J BOLT WITH DOUBLE NUT FOR DRUM INTERNAL,MATERIAL EN/24

eye bolt with nut and washer for boiler drum, Material-EN-19

HALF ROUND TUBE SHIELD FOR LTSH TUBE OD:47.63MM- TUBE SHIELD FOR OFFSET BEND OF LTSH TERMINAL TUBE:R=24MM, L=350MM,T=3.0MM, MATERIAL: SS304

Ready cut gasket for coal nozzle (840X640X3)

Ready cut gasket for coal nozzle (780X700X3)

Half round tube shield for Eco. tube having outer dia : 38.1 mm, Shield Thickness 3mm and its 2 No. locking clamp (Mat.: SS-304). R=19.5 mm, L1=1000 mm

MAHAVIR ENGINEERING WORKS

SHRI ANAND UDYOG

A.T.A. INDUSTRIES

P.D. ENTERPRISE

B.N. INDUSTRIAL WORKS

SHRI ANAND UDYOG

A.T.A. INDUSTRIES

V.N.INTERNATIONAL

B.N. INDUSTRIAL WORKS