PROVN OF TREATMENT SHED FOR LARGE ANIMALS AT 45 MILITARY VETERINARY HOSPITAL AND ADDITIONAL AND ALTERATION TO COOK HOUSE AT SAINIK MESS AT NDA KHADAKWASLA

Amount

M & L for surface dressing n exc 15cm deep of soft / loose soil, incl removing of shrub,grass vegitation etc complete all as specified and directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil

Excavating in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth and getting out

M&L for plain Cement concrete in foundations, filling and mass-concrete type D2 (1:4:8) (40 mm graded stone aggregate)

M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) using 20 mm graded aggregates in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for reinforced cement concrete (nominal mix) type B1 (1:2:4) (Using 20 mm graded stone aggregates) in Columns, pillars, piers, posts and struts

M&L for RCC (Nominl mix) type B-1, (1:2:4) (Using 20 mm graded stone aggregate) as in beams, lintel etc complete all as specified.

M&L for RCC (Nominl mix) type B-1, (1:2:4) (20 mm graded stone aggregate) as in Chajjas and the like etc completed all as directed.

M&L for RCC (Nominl mix) type B-1, (1:2:4) (Using 20 mm graded stone aggregate) as in slab/RCC band/coping over walls, canopies, deck slabs and in shelves and the like etc completed

M&L for mild steel TMT bars 10 mm dia and over, cut to length and bent to shape as required (to be used for stiffness to chain link) including cranking etc..Conforming to Fe 410w (Gde E-250)quality 'A' or Fe 290 (Gde E-125).

Ditto all as per item No. 10 above but 6 to 8 mm dia for stirrups complete all as directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter.

M&L for formwork to rough finished surfaces of concrete sides of columns, posts, struts, piers, pillars and stanchions as specified and directed.

M&L for formwork to flat fair finished surfaces of concrete sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves chajjas including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified.

Ditto all as per item No. 16 above but for 100 mm thick wall set in cement mortat (1:4) complete all as directed

M&L for rendering 15mm thick for concrete or pcc wall surface in cm (1:4) to be finished even and smooth without using extra cement all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) to be finished even and smooth without using extra cement complete all as specified and directed

M&L for preparing new plastered surfaces of walls applying two coats of distemper oil boundover a coat of primer complete all as specified and directed

M&L for preparing new surfaces plastered of wall & applying two coat of cement paint over a coat of alkaly resistant primer complete all as specified and directed

S&F MS rolled /box sections as in main and cross beams ,columns ,purlins, brackets where connected to common rafters ,fixed with angle cleats or other connecting plates, Fe 410 W ,GRADE E- 250/ box sections complete all as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed

M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge etc to wall, fixed with self tapping screws as specified and directed

M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling including snap grid made of aluminium/G.I./M.S. as per specification and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying 2 coats of Synthetic Enamel paint over a coat of red oxide complete all as directed.

M&L for powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Powder Coating t (minimum thickness of powder coating 50 micron)

M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for anodised aluminium (powder coated) door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for 5.5 mm thick Sheet glass, obscured or frosted and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination fixedin aluminum frame work all as directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering brought from outside MD land.

M&L for hard core using broken stone or boulders of gauge exc 63mm but not exc 100 mm , deposited, spread and levelled in layers n.exc 15cms , watered and rolled/rammed to a true surface .

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded aggregates as in sub base complete all as specified and directed

M&L for providing 100 mm thick plain cement concrete type B2 flooring using 40 mm graded coarse aggregates as in hardstanding finished even and smooth with without using extra cement and brooming with tremix compaction complete incl necessary formwork and complete all as directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ having thickness of concrete 100mm complete all as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed

Ditto all as per item No. 37 above but for skirting /riser all as directed including 10mm thick rendering in cement mortat (1:4) complete all as directed

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed

M&L for 20mm thick Granite (of any type) tiles machine cut in cooking platform skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of tiles including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised of having 30mm width of shutter /flaps complete all as directed

S&F second class hard wood (sal wood) Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and including fixed hold fasts (split at one end)

M&L for 30mm thick Flush shutters,of one face is covered with deco rative face veneer with lipping/frame to match solid core construction, with block board core and plywood face panels, commercial type on one sides one face is covered with deco rative face veneer with lipping/frame to match Make: M/s Kalpataru/M/s Green Leaf /M/s A- 1 Teak Products Indore

S&F 40mm dia, cupboard knobs of brass polished fixed with nut, screw and washer of mild steel, bright finished

S&F 100 mm in size Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as directed

M&L for rubber/Leather sheet 12mm thick with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive

M&L for 75 mm thick PCC (1:3:6) type C-1 as in plith protection & finishing the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed

M&L for MS work as in wind ties for roof and flat iron patti for fixing of chain link fencing complete all as directed

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor

S&F in repair for 75mm bore PVC (SWR) bends with access door complete all as directed.

S&F in repair for 110mm bore dia PVC (SWR) bends with access door complete all as directed.

M&L for vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as directed.

S&F 15mm bore of pipe fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed .

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F stop valves 15mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

M&L for 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as directed

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed

M&L for tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15mm bore of pipes

S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted three layered, ISI marked fixed in position all as specified in SSR Part I complete all as directed

S&F ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil all as directed

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

S&F harrison curtain rails (25mm dia), powder coated fancy type anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F fancy type powder coated MS bracket for curtan rod suitable for fixing curtain rod at middle portion & at one side of wall portion.

M&L for stainless steel work including fabrication ,welding in horse collapsible trevices having 304 SS pipes complete all as specified and directed

Supply and laying in trenhes/on ground GI tubing "Medium grade" of 20 mm bore size with all fittings complete. (Excavation of earth work shall be measured and paid seperately.

Cutting screwing existing steel tube insertion 20 x 20 x 15 mm Tee, shot nipple, union for branch connections of the internal dia 20 mm alterations or additions if necessary done in without taking down.

S&F of GM gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipes

Cutting into existing manholes for connecting new drains internal dia of pipe 100mm making good to pipe & rendering cutting out existing benching for forming branch channel (1/2 round or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished .

M&L for providing reinforced cement concrete pipes 150mm dia class NP 2 with collars laid and jointed with cement jointed complete all as directed

M&L for providing plain cement concrete (1:2:4) type B1 (Using 20mm grade stone agg) as in surfaces channels & drains

M&L for providing precast RCC (1:2:4) type B1 (Using 20mm grade stone aggregate as in cover slabs for manholes set in CM (1:6) complete all as directed (Note : Reinforcement shall be measured & paid separately)

S&F for providing mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required includig cranking, bending etc & binding with ms wires (annealed) n. exe 0.9mm dia complete all as directed.

M&L for providing bed to drain pipes 150mm dia in cement concrete (1:3:6) type C2 (Using 40mm graded stone aggregate) including packing under & haunching against the sides of pipes after they are laid & tested.

M&L for Preparing new plastered surfaces of walls applying three coats of white wash all as specified and directed

M & L for 4.0 mm thick Asbestos cement plain building boards, fixed in false ceiling including anodised aluminium snap grid frame work for false ceiling , the aluminium sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285. The snap grid consist of anodized aluminium main/cross tee of size as indicated. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer’s instruction. The main and cross tees shall be jointed at junction/crossings with anodized aluminium angle bracket of size as indicated, if not indicated it shall be 15mmxl5mmx 1.5mm, weighing 0.12 Kg per running metre, fixed with sutiable mild steel, bolts nuts and washers, all as per manufacturer’s instructions. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40mmx 25mmx2mm, weighing 0.36 Kg per running metre. Size of the snap grid shall be as indicated.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as directed

Ditto all as per item No. 82 above but without glazing bars

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded aggregates as in sub base all as specified and directed

S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L for 35 mm thick Factory made II nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) supplied and fitted to chowkats.

M&L for 100mm butt hinges cold rolled mild steel medium weight and fixed

S&F 150mm Aluminium handles, cast type, anodised

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections all as specified and directed

S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as directed

M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer.

M&L Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore of pipes including taking up or down existing steel tubing and connections.

Demolition of Brickwork or block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed

M & L for providing reinforced cement concrete pipes 200mm dia class NP 2 with collars laid and jointed with cement jointed all as directed

M & L for providing bed to drain pipes 200mm dia in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate including packing under & haunching against the sides of pipes after they are laid & tested.all as directed

M&L for laying of reinforced concrete pipe, dia of 100 mm 2 nos half round for bottom and top and before laying excaved area shall be levelling all as specified and directed . Note: One half round Top and One half round bottom together will be considered as one running meter. Make as per sample approved

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly complete all as specified and directed. One light/Fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item No. 100 above but one 3 pin socket outlet, 5/6 Amps, independent

Ditto all as per item No. 100 above but one 3 pin socket outlet, 5/6 Amps on the same board with other switches

Ditto all as per item No. 100 above but one 3 pin socket outlet , 15/16 amps on independent board with cable 2.5 Sqmm and 2.5 sqmm as earth wire

S & F switch piano flush type 5 Amps SP one way complete all as specified. (Make:-Anchor/Vinay)

M&L for switch socket Combination 16A, 3 pin, flush type

M&L for switch socket combination 2 in 1, 5A flush type

M&L in electronic step type ceiling fan regulator Conform IS 4615-1968 120W, flush type.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

S&F LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency,integrated aluminum heat sink suited for installation in existing T8 tube light with G13 lamp holders complete all as specified. Make: Bajaj/Havells/ Philips/Crompton/Luker

S&F 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified . Make: Bajaj/Havells/Philips/ Crompton / Luker

S&F recess mounted 2' x 2' LED Panel lights 36 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Make:Havells Cat Part: VENUSNEOHE2X2PLR18-42WLED857MOD equivalent in Luker/ Philips Note: The quoted price shall include the cost of Light and its driver.

S&F LED security light fiitting 20 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed. Make:lLukar Cat Part:LSTE30(Sleek series) or equivalent in Havells / Crompton

S&F of ceiling fan of sweep 1200mm, 240 volts of not less than 5 star BEE rating milk white coloured connecting up with twin core 1.0 sqmm cable from ceiling rose including required length of hanging rod with fan hook duly fixed to ceiling with suitable fastner complete all as specified. Make Crompton, Orient or Havells Make : Old fan should be deposied in MES Store

S&F of high speed wall mounted fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories complete all as specified and directed. Make:Crompton or equivalent in Havells/Orient Make : Old fan should be deposied in MES Store

S&F energy efficient BEE five star rated storage type water heater vertical mounted of capacity 25 Ltrs

S&F in replacement sheet metal enclosures single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 06 Sqmm cable with 01run of 4 Sqmm earth wire along with casing caping shall be measured as one RM)

S&F MCB DB 08 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete as reqd at site

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

S&F in replacement of C Curve MCB DP 6-40 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed.

M&L for laying XLPE underground cable 10 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade Make:RPG(Asian)/ Polycab/ CCI/Havells / Finolex

M&L for concealed point wiring in and including new PVC conduit with the help of multi stranded unsheathed FRLS copper cable 1.5 Sqmm 650/1100v conforming IS: 3419-1988 adhereing to colour code including earth wire of the size 1.5 Sqmm green coloured of any length from the distribution board as indicated and shall confirm to IS 14772-2000 and unbreakable terminal boxes for modular switch sockets as required at site for the following:- One light/fan point controlled by one switch one way.

Ditto all as per item No. 123 above but One 3 pin socket outlet 5/6 Amps on the same board with other switches.

Ditto all as per item No. 123 above but One 3 pin socket outlet, 5 Amps on independent board.

Ditto all as per item No. 123 above but One 3 pin socket outlet, 15 Amps on independent board with cable 4 Sqmm and 4 Sqmm as earth wire

S&F replacement modular switch piano type 6 Amps one way one module

S&F replacement modular switch piano type 16 Amps one way one module

S&F in replacement modular socket, 6A-2/3 pin 2 module

S&F in replacement modular socket, 6/16A-2/3 pin 2 module

S&F 1x18/20, 230v surface and wall mounted LED battern, T8 luminaries with one 18/20 watt LED retrofit T8 polycarbonate tube and including connecting up wuth twin core twisted flexble copper conductor cable from eciling rose complete all as specified. Make: Crompton Greaves/Bajaj/Orient/ Usha/Khaitan

M&L for fixing the metal body heavy duty exhaust fan of sweep 300 mm, single phase 240 v, 1400 RPM inculding aluminium louvers and necessary fastner fixing accessories to fix any type of wall by making hole of suitable size complete all specified to the entire satisfaction Make: Crompton Greaves/Bajaj/Orient/ Usha/Khaitan

ELIEYAS TRADERS

Sarkar Enterprises

agarwal and company

Sayili Enterprises