Repairs to certain road and road furniture of area AGE B/R-II under GE (East) Jalandhar Cantt

Amount

M&L for repair to pot holes any depth area not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed as specified for bituminous carpet 2.5 cm thick well rammed and sealed with binder using paving bitumen @ 6.8 Kg Per 10 Sqm blinded with 0.09 cum of stone chips and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole not exceeding 30mm complete all as specified and directed.

Material & Labour for premix bitumen macadam (consolidated thickness not more than 75mm) laid, rolled and compacted to required gradient and camber with paving bitumen VG-10 any penetration @ 4 % by weight of total mix complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete (VG-30) with 5.5% binder content by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Supply & fix in repairs road studs high density reflective lens ABS plastic body yellow/red colour 90x100x17mm fixed with steel nails and adhesive including taking out old road stud any type any description complete and as specified . Make : 3M-290 of 3M or equivalent of Greenlite / TATA BP SOLAR/ CAT PART NO DA 52 of Dark eye/SHAKTI

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Material & labour for providing precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:6 as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, benching etc throating setting in cement mortar, complete with joints to match complete all as specified and directed.

Material & Labour for providing and marking broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

Material & labour for preparation of old painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed.

SATISH AGGARWAL AND CO

SANDEEP JHANJI CONSTRUCTIONS