80883 Specail Repairs of Bldg No T-13 (NAU) and certain sanctioned works under GE Haddo Port Blair

Amount

Demolition of cement concrete block masonry of any description built in cement mortar including all quoins arches, pillers, etc all as specified and as directed by Engineer-in-Charge.

M&L for pre-cast cement concrete block masonry with solid blocks, exc 10cm in width using PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) and set in cement mortar 1:6 complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces cement plaster 1:6 finished even and fair without using extra cement.

M&L rendering 15mm thick in CM 1:4 over concrete surfaces finished even and smooth without using extra cement duly mixing water proofing compound (water proofing compound shall be measured and paid separetaly)

Supply only integral water proofing compound.

M&L for preparation of new plastered surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat of primer.

M&L for providing 2 to 3mm thick wall care putty on newly / old plastered surfaces of walls and ceiling/ complete removal of exisiting finish on wall and ceiling and applying and two coats of distemper oil emulsion paint over a coat of primer

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Material and labour for designer multi stepped suspended false ceiling with 12.5 mm thick gypsum board, consisting of intermediate channel of 45 x 15 x 0.9 mm thick for ceiling (frame work shall be suspended from soffits of roof with rawl plugs) finally joints shall be filled with jointing compound and paper tape and surface finished smooth including applying two coats of acrylic distemper over a coat of primer all as directed.

S&F for PVC pipe 100mm dia as in Low density poly ethylene pipes ( LDPE) of pressure rating 6Kgf/cm2 laid in trenches as in weep holes

Taking down chowkats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description.

All as per item No 11 above but area exc 1.5 sqm but n.exc 4 sqm each

S& F Factory Made Solid PVC Moulded shutter with 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core.

S & F Solid PVC Door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube , suppling & fixing in opening as per manufacturers specifications.

M & L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified.

S & F glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.24(a), in II nd class hard wood, thickness of shutter 35 mm(rate including anti termite treatment).

M & L 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density wood particle board with commercial face veneers, supplied and fittted to chowkats thickness of shutter 40 mm thick(rate including anti termite treatment).

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed.

S & F aluminium anodised, barrel tower bolt of extruded section, 150 mm long.

S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 75mm size.

S & F MS butt hinges, cold rolled, medium weight, 100mm size.

S & F extruded aluminium handles, size of handle in 150mm.

S & F extruded aluminium handles, size of handle in 100mm.

S & F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm.

S&F aluminium alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet, cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long.

S&F aluminium alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet, cast extruded section & fixing bolts & sliding bolts of extruded section 150mm long.

S & F door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed aluminium (Die cast ) body.

M&L flat iron as in hold fast and similar work conforming to Fe-290 Gde-E-165.

M&L providing cement concrete 1:2:4 type B0 (used 12.5mm graded aggregate) in hold fast rounded or chamfered on edges complete all as specified and directed.

M & L preparing of new surfaces of wood and wood based material and applying two coats of synthetic enamel paint over a coat of pink wood primer all as specified.

S&F Joist, channel, angle or tee sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (Fe-410-W Gde E-250 Quality A)

Dismantling timber scantlings 40 Sq cm and over in section in any position unframed work.

Dismantling plain/corrugated steel sheets in roof covering including ridges complete.

Supply and Fix pre-painted galvalume aluminium zinc coating Galvalume based steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm and thickness not less than 0.50mm (Galvalume based PPGL trapezoidal profile sheets) fixed with aluminium self staging screws of size 50/75mm with integral EPDM washer and aluminium washer of suitable size in roof covering all as specified. Note: Overlap shall be provided as specified by the manufacturer.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, eaves/cladding to wall, fixed with self tapping screws as specified.

M&L for aluminium wind ties of any size fixed with self tapping screws in roof covering.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.

S&F for Anodised aluminium frame & shutters for doors, windows, ventilators, partition with particle board with one or more rebates including joining cleat and cleat angle etc for fixing complete shall be specified (floor spring, glass, particle board, gauge will be measured and paid seperately)

S&F aluminium grill on U channel fixed to window frames

Supply only sheet glass, 4.8 mm thick ordinary quality in required size,

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises

M&L for Joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 10mm thick screed bed in CM 1:4.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) complete all as specified.

M&L glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles

Taking down GI tubing 15mm dia, including connections on walls / roofs/ ceiling all as specified and as directed.

All as per Item No.45 above but 20mm bore.

S&F 3 layer PP-R Polypropylene random copolymer pipes SDR 7.4 UV stablised and obial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. (a) Outer dia of pipe 25 mm

All as per item No. 47 but outer dia of pipe 32 mm

S&F 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe as in repairs.

S&F 25mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe as in repairs.

M&L for Telephonic black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including screed bed in cement mortar 1:4, 20 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy. Make-Jaquar Cat. No. Con-053KN

Supply and fix in repairs CP bib cock 15mm dia with crutch handle as approved fancy type short body (Make-Jaquar Con-047KN) complete all as specified and directed.

S & F in repairs CP overhead shower dia 105 mm round with revolving joints (with body rotation) & 115 mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709 as approved.

S & F in repair Toilet paper holder Make : Jaquar Code (ACN-1153N) complete all as specified and directed.

S & F in repair CP Towel ring round Make : Jaquar (AQN-7721) complete all as specified and as directed.

S & F in repair CP Single Towel Rail 600 mm long Make :Jaquar (AQN 7711) complete all as specified and directed.

S & F in repair Soap dish Make :Jaquar Code (AQN-7731) complete all as specified and as directed.

S & F CP brass 15 mm health faucets with 1 mtr tube & hook with metalic expandable tube 15 mm complete set Make : Zim Cat No. 1624A

S&F in repairs PVC coated curtain rod decorative 20mm dia.

S&F in repairs powder coated brackets fancy type for curtain rods.

S&F in repairs PVC (SWR) (type"B") pipes110mm bore single socketed in any length with rubber ring joints fixed to walls including fitting with PVC Clamp as per manufacturer's instructions.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) junction single(single T) complete all as specified and as directed .

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed .

M&L PCC Cement concrete in surface channels and drains Type D-2, 1:4:8 using 40mm graded stone aggregate all as specified and as directed by Engineer-in-Charge.

Forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

S&F in repairs PVC (SWR) (type"B") pipes 160mm bore single socketed in any length with rubber ring joints laid in trenches.

Supply and fix in repairs vitreous china wash down water closet pane (pedestal pattern white) standared size with 'S' or 'P' approved brand complete. (Make- Somany Cat Pt No. 120119)

Supply and fix in repairs vitreous china WHB white flat back size 500 x 350 x 120 mm rectangular shape approved brand excluding taps waste chain complete all as specified. (Make- Somany Cat No. 110428)

Supply and fix in repair PVC Flushing cistern 10 ltr capacity high or low level including waste pipe bracket etc complete all as specfied and as directed.

Supply and fix in repair pillar cock long neck with aerator 15mm dia as approved (Make-Jaquar CON-021KN) complete all as specified and as directed.

Supply and fix in repair 2 way CP bib cock 15mm dia as approved (Make-Jaquar CON-041KN) complete all as specified and as directed.

S&F in repairs concealed stop Cock with wall flange incl all fittings complete all as specified and as directed.Make : Jaquar Cat No. CON - 083 KN or its Equivalent.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering.

S&F 18/19mm thick Prelaminated particle board, interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws.

Demolition of cement concrete in any position of any description not otherwise specifically provided for.

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water etc.

M&L for 40mm thick cement concrete Type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in floor finished even & smooth all as specified and as directed by Engineer-in-Charge

S&F in repair 600x600mmx4mm thick 'E' board class as in false ceiling as per manufacturer's instruction complete all as specified and directed.

S&F Anodised aluminium snap grid 605X605 frame work for false ceiling all as specified

S&F 200 mm long aluminium anodised sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified

Taking down old plaster on walls/ceiling by chipping, chiseling upto depth of 20 mm thick average and removing the debris from the site and cleaning the surface with clean water etc. complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:4 with WPC over 10mm thick in CM 1:6 of fair faces of brick work or concrete surfaces finished even and fair without using extra cement. NOTE: WPC will be measured and paid separately

M&L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over a coat of primer.

M&L PCC 1:4:8 type D2 using 40mm aggregate for packing under and haunching against the side of sewage soil/waste pipes.

M&L for 75 mm thick Cement concrete type B2, 1:2:4 (40mm graded aggregate) as in sub base.

M & L for laser cut ceramic coloured tiles of size 400 x 400 x 7mm thick as in floors / skirting of size as directed by engr in charge, set & jointed in neat cement slurry & pointed in coloured cement to match including screed bed or bedding layer of cement mortar 20mm thick in CM 1:4 for laying floor finishes.

M&L for Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 20mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified Make : jonson, kajaria, Orient,Somany.

All as per item No. 18 but on vertical surfaces such as skirting, dados and riser etc including a layer of screed bed 10mm thick 1:3 all as specified.

S&F for 32mm dia waste coupling complete all as specified and directed.(Make-Johnson Cat Pt No. T0062C) Or equivalent

Supply and fixed in repair CP grating 100 mm dia complete all as specified .

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm.

Supply and fixed in repair 2 way CP bib cock 15mm dia as approved (Make- Johnson Cat Pt No. T 3208 C) Or equivalent complete all as specified and directed..

S&F in repair Mirror cabinet PVC/fiber of size 550 x 520 x 100 mm with sliding mirror 4mm thick of size 240 x 290 x 2 Nos with built in rack of size 230 x 150 x 90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia.(Make:Supreme)

S&F Rotational moulded polyethylene water storage tanks 3 layered ISI marked(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litre .

Supply and fixing 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and directed..

S&F 50mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including necessary fittings etc

M&L for excavation over areas n.exc. 1.5m deep and getting out in hard dense soil complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for broken stone or boulders hard core of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base complete all as specified & as directed by Engineer-in-Charge.

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate 75mm thick concrete as in sub base of paving complete all as specified & directed by Engineer-in-Charge.

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified & as directed by Engineer-in-Charge.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A'

Finishing surface to concrete roads, pavements, by brooming

Removing excavated soil to a dist n.exc.50m deposited complete all as specified and as directed.

Supply and fixing PA Amplifier 2000 Watt including mic & all accessoreis all as specified and directed Make: Ahuja/ Sony

Supply and fixing PA 02 Zone Amplifier 2000W, 1000W RMS on each including all accessoreis all as specified and as directed by Engineer-in-Charge Make: Ahuja/ Sony

Supply and fixing PA Dual Sound Projector speaker 30 W including all accessoreis all as specified and as directed by Engineer-in-Charge Make: Ahuja/ Sony

Supply and fixing DVD player inclduing all accessories as specified and as directed Make: Ahuja/ Sony

Supply and fixing PVC Rain Cover for dual sound projector speaker including all accessoreis all as specified and as directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core, 2.5 sq.mm normal cross section area Make: Havells/ Polycab / Finolex

Supply and fixing GI wire 4mm dia with sleeves including wire guard comple all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board test point 75x75x25mm including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

S & F Cross arms, bracings, supports, clamnps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed.

Material and labour for PCC type B2 1:2:4 using 40mm graded aggregate all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs with MCB/MCCB 415 Volt/230 Volt

Taking down old aluminium sub main wiring of any size.

Taking down light fittings of any type complete all as directed .

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC conduit of suitable size but not less than 20mm dia , with all fittings, concealed in wall/ceiling /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover/modular decorative cover plates for mounting switches/ sockets/regulators etc complete as specifed (inner and outer). along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :-

One light/fan point controlled by one switch 5 Amps one way.

One 3 pin 5 Amp socket out let on independent board.

One 3 pin 5 Amps socket out let on same Board

Two light point controlled by one switch 5 Amps one way

All as per item No.122 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let, and one run of 4.0 sqmm cable for earth in green colour on independent board.

All as per item No.122 above but point wiring with 2.5 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let, and one run of 2.5 sqmm cable for earth in green colour on independent board.

S & F switch piano flush type single pole, 6 Amp one way 230 V AC. Make : Cona/Anchor/Krinzal

S & F switch piano flush type single pole, 16 Amp one way 230 V AC.Make : ROMA(Anchor)/Cona/Legrand

S & F socket outlet 3 pin 6 Amp flush type 230 V AC Make : Cona/Anchor/Krinzal

S & F modular socket outlet 16/20 Amps and 6/10 Amps two socket heavy duty 230 V AC Make : ROMA (Anchor)/Havells (Crabtree)/Legrand

S & F modular switch 16/20 Amps one way 230 V AC Make : ROMA (Anchor)/Havells (Crabtree)/Legrand

S & F modular switch 6/10 Amps one way 230 V AC Make : ROMA (Anchor)/Havells (Crabtree)/Legrand

S & F modular socket outlet 6/10 Amps intel multi socket for all pins 230 V AC Make : ROMA (Anchor)/Havells (Crabtree)/Legrand

S & F socket outlet 3 pin, 16 Amps flush type 230 V AC Make : ROMA(Anchor)/Cona/Legrand

S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete. Make : Cona/Anchor/Krinzal

S & F of triple pole and neutral sheet steel powder coated distribution board vertical type for incomer MCCB and outgoing MCBs fitted with bus bar, Neutral link, Earth bar, and Din rail suitable for use on 415 V, 50 Hz supply as per Havells make double door T P & N DN system 04 way all as directed Make: Standarad /L&T/Havells

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways. Make: Legrand/L&T/Havells/ABB

S & F of MCCB 4 pole, 100 amps, 10 KA, 415 volts, all as directed by Engineer -in-charge . Make: Standard /L&T/Havells

S & F of MCB isolater SPN, 40 amps, 10 KA, 230 volts , all as directed by Engineer -in-charge . Make: Standard /L&T/Havells

S& F of MCB SP, 6-32 amps, 10 KA, 240 volts, Make: Standard /L&T/Havells

S & F of Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC casing and caping (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm for earth continuity all as directed.

S & F surface mounted 20 watts Astra with ultra bright LED tubelight luminier comprises of thermaly conductive material,pre wired with high effeciency electronic driver with high transulent frosted diffuser gets glare free,smooth light distribution as directed by Engineer - in Charge. MakePhilips(BN150WLED20S-6500PSEODGR)/Crompton Greves/Bajaj

Taking down carefully ceiling fan of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F Ceiling fan 5 star rated, 1200mm sweep, of model No.ES-50 5* (white colour) working on single phase 230 volts, 50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size of 0.75 sq mm complete all as per directed. Make: Havells (Model No. ES-50 5*)/Bajaj/CG

Taking down carefully Exhaust fan of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F Exhaust fan 300mm sweep, 900 RPM of model Turbo force working on single phase 230 volts, 50Hz AC supply complete with including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of suitable size of 0.75 sq mm complete all as per directed. Make: Havells (Model Turbo Force)/Bajaj/CG

S & F building security luminaire with high power led and unique peanut lens to ensure uniform distribution, higher spacing between poles and maintanance free system, 1x25 watts LED light fittings including suitahle down rod, clamps, nut, bolts and other related items for fixing the wall/surface suitable for 230 volts, 50Hz AC supply all as directed by Engineer - in - Charge Make: CG Cat No. LSTO-25-CDL or Phillips / Bajaj / Havells

S & F of MCB DP, 40 amps, 10 KA, 230 volts, all as directed by Engineer -in-charge . Make: Standard /L&T/Havells

S & F of Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed.

S&F Recess mounting 9W, LED down light fitting round in shape,3000K pressure die-cast aluminium housing with white front erame with opal translucent cover, high power LEDs mounted of model Green LEDi. Spring loaded clips for easy mounted all as directed. Make - Philips(DN194BLED09S-6500PSUWHS1)/Havells/CG/Bajaj

Supply and fixing of Decorative 10 watt LED,3000Kluminaire with aluminium extruded channel finished in anodised IP 20, Class I power factor >0.9 pre wired with electronic driver high translucent frosted PMMA difuser for glare free smooth lighting distrubution surface mounted complete all as specified and directed Make: Philips(BN150WLED13S-3000KPSE ODGR)/CG(Cat No.LCL-10-CDL 2ft) or equivalent in Philips/Havells/Bajaj

Taking down existing Geyser of any capacity and size and handover to AGE E/M store and S & F Energy Efficient BEE 5 star rated instant water heater storage type of 25 liters capacity, vertical electric supplied and installed complete including flexible pipe for hot and cold water, dead weight pressure release valve, Anchor fastner - 4Nos of suitable size all as directerd by Engineer-in-charge. Make: Havells(Model: Puro Plus)/Bajaj/Racold.

BN Engineering Works

NAWAZ CONSTRUCTIONS

Gulmarg Electrical Service

Sree Tirumala Enterprises

M/s Sriya Enterprises

M/s Ramesh Lal

BHARAT MULTITECH INDUSTRIES PVT LTD