Repair Renovation of Ladies Hostel No. 1 of Assam Medical College and Hospital, Dibrugarh.

Dismanting wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.14.1 Of sectional area 40 square centimetres and above

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1-GS. Sheet

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 in cement mortar

15.52 Dismantling of flushing cistern of all types (CI/PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.1-Up to 150 mm diameter

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: 15.12.1 Of area 3 sq. metres and below

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.33.3 Beyond 120 cm girth upto and including 240 cm girth

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Half brick masonry with common bunt day FPS. (non modular) tricks of dans designation 7.5 in foundations and plinth in 6.12.1 Cement mortar 13 (1 cement course sand

Reinforced cement concrete work in walls (any thickness), including flached plasters, buttresses, plinth and string courses, Mels, columns, pilars pers, abutments, ports and struts etc. above plinth level up to Boor five lever, exttuting cost of centering, shuttering, finishing and reinforcement: 5.2.2.1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)

5.3 Reinforced cement occorste work in beams, suspended foom, roots having slope up to: 15" landings, busconies, shelves, chajos, int bands, plain window sils, Marcases and spiral staircases above plinth vals to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone Ill) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1- 1:4 (1 cement: 4 coarse sand)

13.7 12 mm cement plaster finished with a floating coat of neat cement of mix 13.7.1 1:3 (1 cement: 3 fine sand)

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 11.1.1:-1:4 (1 cement: 4 coarse sand)

thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

9.2 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and 16: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at Junctions, ie, at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dash fasteners to be paid for separately): 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): 21.3.2-With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Votatle Organic Compound) content. 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: 13.48.1 Two or more coats applied on walls @ 1.25 tr/10 sqm over and including one coat of Special primer applied @ 0.75 tr/10 sqm

13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/Litre

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 13.61.1 Two or more coats on new work

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 min diameter with bitumen and G.1. limpet washers or with G.1. limpet washers filed with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), sluding the cost of purlins, rafters and trusses and including cutting All and share wherever required. 12.1.1 :-1.00 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fred with polymer coated Jor L hooks, bolts and nuts 8 mm dia G.L Impet and bitumen washers complete. 12.4.1.0.80 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain GS. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete: 12.5.1.1:- 60 mm thick with zinc coating not less than 350 gm/m²

17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including Integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistem fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect, as

Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass-pillar taps, 32 mm C.P. brass waste of standard pattem, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.6 White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm

Providing and fixing wash basin with C.l. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets. cutting and making good the walls wherever required:- 17.7A White Vitreous China angle back Wash basin size 550x400 mm with a 15 mm CP Brass single

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing mimor of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 17.32.4 Rectangular shape 1500x450 mm

17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass

Providing and fixing toilet paper holder 17.34.1 CP. brass

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 18.22.2 :-150 mm diameter

Providing and fixing C.P. brass long body bib cock of approved quality coriforming to IS standards and weighing not less than 690 gms. 18.51.1 :-15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of 18.52.1:-15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin moxer and geyser points of 18.53.1: 15mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal External Work 18.9.9:- 100 mm nominal I.D. Pipe

18.9.8:- 75 mm nominal I.D. Pipe

Providing and fixing PTMT grating of approved quality and colour 18.58.1.1:-100mm nominal dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to

Supplying and fixing C.I. cover without frame for manholes

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb

Constructing brick masonry chamber for underground C.l. inspection chamber and

Providing and fixing G.1. pipes complete with G.1. fittings and clamps, including cutting 18.10.5:- 40 mm dia nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. ve fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge 18.8.4:-32 mm nominal outer dia pipes

18.8.3:- 25 mm nominal outer dia pipes

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to 18.50.1:- 15 mm nominal bore

Providing and fixing gun metal gate valve with C.1. wheel of approved quality (screwed 18.17.1:- 25 mm nominal bore

18.17.3:- 40mm nomial bore

CPWD PAR: Overhead Tank With Staging upto the height of 20.00 metre(As per CPWD Pilinth area Rate of DPAR 2020)

Wiring for light point fan point exhaust fan point call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.5. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 1.8.1 Group A

1.8.2 Group B

1.8.3 Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.4: 3 pin 5/6 amp socket outlet

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but Jexchuding modular plate etc. as required.

Wiring for circuit submain wiring along with curth wire with the following sizes of FRLS PVC imulated copper conductor, single core cable in surface recessed medium class PVC conduit as required 1.14.2

Supplying and fixing following way, single pole and neutral, sheet steel. MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neutral bus bar, carth bar, din bar, interconnectiom, powder paimed including earthing etc. as required (But without MCB/RCCB/Isolator) 2.3.3:- 12 way double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning ete, as required. 2.10.1 Single pole

2.10.3 Double pole

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling boles in cubicle panel, making connections, etc. as required. 2.2.13 100 Amp, 30KA, FPMCCB

Earthing with G.1. earth pipe 4.5 mettre long, 40 mm dia including accommories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe sty, with charcoal coke and salt as required

Providing and fixing & SWG dia 1. wire on surface or in recens for loop earthing along with existing surface' recessed conduit/submain wiring cable as required

Please Enable Macros to View BoQ information