SPECIAL REPAIR OF BLDG NO. P/4/2 AT SURI UNDER GE PANAGARH

Amount

B/R PORTION

Taking down cement plaster on brick or stone walls, surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

M&L for Rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

M&L for Rendering 5 mm thick on fair faces of ceiling/ chajja concrete surfaces in CM 1:3, complete all as specified and as directed.

M&L for Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

Suppy only Integral waterproofing compound, complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) unreinforced, complete all as specified and as directed.

M&L for 75 mm PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection, footh path and hard standing, complete all as specified and as directed.

M&L for Providing, cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in coping to chajja tops and other similar works, complete all as specified and as directed.

M&L for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m , complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil, complete all as specified and as directed.

S&F in repair's vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2using 40mm graded stone aggregate as in sub base, complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm stone aggregate as in floor finished even and smooth without using extra cement, complete all as specified and as directed.

S&F Wash basins white Vitreous China (flat back or angle back type) size 580 x 450 mm, including cutting and pinning in ends of brackets or erecting, complete all as specified and as directed.

S&F 10 liter capacity two way flush PVC low level flushing cistern, low level, white, with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size , complete all as specified and as directed .

S&F in repair''s wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern , complete all as specified and as directed.

S&F in repair's 15 mm bore conceled Stop valves, cast copper alloy, screwed down, fancy type high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F PVC connection 15mm dia and 600mm long, complete all as specifed and as directed.

S&F in repair's for 15mm bore dia fancy type pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out littred hot or cold with long screwed shanks and flynuts screwed for iron pipe, complete all as specifed and as directed.

S&F in repair's for 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specifed and directed.

S&F in repair's gratings square 150 mm size of PTMT (Miniumum 100 gms ), complete all as specified and as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repair's 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F CP towel rail of 20mm dia with hook 600mm long, complete all as specifed and as directed.

S&F in repair's shelf of PTMT fixed with and including chromium plated brass screw and wooden/ plastic cleats (Min wt 300 gms), complete all as specified and as directed.

S&F in repair's Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 , complete all as specifed and as directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/350X450X7mm thick over and ncluding 10 mm thick rendering in cement mortar 1:3 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specifed and as directed.

M&L for Non - skid Ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6, complete all as specifed and as directed.

M&L for coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 10 mm thick laying floor finished in cement mortor 1:3, complete all as specifed and as directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish, complete all as specifed and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) exc 1.5 sqm but n. exc 4sqm each, complete all as specifed and as directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) n exc 1.5 sqm each, complete all as specifed and as directed.

S&F for 2nd class hard wood plain ,solid ,straight chowkats and frames ,wrought framed rebated on the solided rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

M&L for Factory made 35 mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauge, etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR part I section 8 clause 20 (b) of windows, ventilator etc, complete all as specifed and as directed.

M&L for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with stainless steel wire tapels , complete all as specified and as directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 as in bed blocks for hold fast including necessary formwork , complete all as specified and as directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified and as directed.

S&F for bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 , complete all as specified and as directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc , complete all as specified and as directed.

S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening , complete all as specified and as directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification,complete all as specified and as directed.

S&F for 4.8 mm thick tinted sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F butt hinges, extruded alluminium with mild steel hinge pin, bright polished ad fixed, type 75 mm size C21, complete all as specified and as directed.

S&F for 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specifed and as directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type, complete all as specified and as directed.

S&F for 75mm long anodised extruded aluminium alloy handles, fabricated type, complete all as specified and as directed.

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete mild steel , complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store, complete all as specifed and as directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store, complete all as specifed and as directed.

Re-fixing 15mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) , complete all as specifed and as directed.

Re-fixing 20 mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) , complete all as specifed and as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth , complete all as specifed and as directed.

S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor , complete all as specifed and as directed.

Dismantling of 100 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

Dismantling of 75 mm dia CI pipes pipe jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor ,complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor ,complete all as specifed and as directed.

S&F PVC (SWR) bends any radius 75 mm bore pipe , complete all as specifed and as directed.

S&F PVC (SWR) bends any radius 110 mm bore pipe , complete all as specifed and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal provided with access door of 110 mm dia, complete all as specifed and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal provided with access door of 75 mm dia, complete all as specifed and as directed.

S&F PVC (SWR) vent cowl 75 mm bore, complete all as specifed and as directed.

M&L for complete removal/ scrapping of existing treatment of plastered surfaces and appying one coate of alkali resistacse primer over a layer of 1.5mm thick wall care putty and two coat of oil bond distamper, complete all as specified and as directed.

M&L for preparation of newly plastered surface ceiling surfaces and applying three coat of white wash, complete all as specified and as directed.

M&L for prepatation of newly painted steel surfaces of any description over 10 cm in width or girth, not other wise described and applyig two coat of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and as directed.

M&L for prepatation of old painted steel surfaces of any description over 10 cm in width or girth, not other wise described and applyig two coat of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and as directed.

M&L for preparation of old ceiling surface and applying one coat of white wash, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth, complete all as specified and as directed.

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel of size 750 x 600 mm including screw, complete all as specified and as directed.

S&F mild steel work in rpost, rectangular trusses including moulding in arch shape including sshaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 including necessary welding etc, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specifed and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment , complete all as specifed and as directed.

Demolition of brick work bilt in cement mortar or cement lime mortar including all quoins archas pillars etc and pre-cast block walling etc, complete all as specifed and as directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius, built in CM 1:6 , complete all as specifed and as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate as in roof kerbs or mud stop rounded , complete all as specifed and as directed.

M&L for 25 mm thick average PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate ) as in roof padding , complete all as specifed and as directed.

M&L for Rendering 10 mm thick on fair faces of roof surfaces of concrete surfaces in cement mortar (1:4), finished even and smooth with out using extra cement and with WPC , complete all as specifed and as directed. Note: WPC will be measured and paid separately

M&L for preparation new surface of roof and applying two coat of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage /seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Notes- 1. as per description of the items minimum two coats of polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by the as per manufacture instruction.pl note no price adjustment shall be made,if more coats of (PU)acrlic based water proofing liquid compound & primer are required for roof treatment. 2. quated rate shall be deemed to be included for work in building/structure of any height.

Demolition of RCC of any description including (reinforcement cut as per requred ) , complete all as specifed and as directed.

M&L for deformed/twisted TMT MS bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hoping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality, complete all as specified and as directed.

All as per item No 1.093 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , complete all as specifed and as directed.

M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves lintels and like etc , complete all as specifed and as directed.

M&L for use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as specifed and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specifed and as directed.

M&L for RCC 1:2:4 type B1 using 20mm stone aggrtegate as in Beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specifed and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed over 20mm thick screed bed, complete all as specifed and as directed.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work , complete all as specifed and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30 mm), complete all as specified and as directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished ,complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed 140 mm overall length of cover plate, complete all as specified and as directed.

S&F MS drapery rod of 25 mm dia of PVC coated in curtain rod, complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm long

S&F MS PVC sheeted/powder coated bracket size 150 mm made to shape suitable for holding curtain/drapery rod of 25 mm dia fixed with PVC rawl plugs and MS steel screws for single/double rods, complete all as specified and as directed.

S&F cast iron Wardrobe hooks (single) 50mm to 60mm, complete all as specified and as directed.

M&L for second class hard wood in lipping / Plain fillets of size n.exc 3 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specifed and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and including over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:3), complete all as specifed and as directed.

Material and labour for complete removal of existing treatment preparation of surfaces of walls applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specifed and as directed.

E&M Portion

Taking down carefully copper / aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing , complete all as specified and as directed.

Material and labour for point wiring of light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers or modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed. Note : Quoted rate deemed to be included for necessary chasing/cutting and making good the surface.

Material and labour for point wiring of 3 pin ,5 Amps, socket out let points on independent board controlled by one , one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers or modular cover plate with frame of suitable size and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed. Note : Quoted rate deemed to be included for necessary chasing/cutting and making good the surface.

All as per Item No. 2.03 here-in-before but 5 Amp socket on same board with other switch, complete all as specified and as directed.

Material and labour wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 4 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and as directed. Note : Quoted rate deemed to be included for necessary chasing/cutting and making good the surface.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way, complete all as specified and as directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type , complete all as specified and as directed.

S&F socket outlets 3 pin, 5/6 Amps flush type 230/240 V, complete all as specified and as directed. (For Same Board only)

Supply and fixed switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch, complete all as specified and as directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts, ISI marked ,complete all as specified and as directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings ,complete all as specified and as directed by Engrs-In-Charge.

Supply & fixed LED bulb 12 watts inverter type NU bulb with four hour power backup, 240 volts, ISI marked ,complete all as specified and as directed by Engrs-in-Charge.

Supply and fixed wall mounted type decorative LED light with 9w LED bulb ,230V AC, 50Hz with all accessories ,complete all as specified and as directed by Engrs-In-Charge.

Supply & fixed Bell push , flush type , 5 amp ,complete all as specified and as directed by Engrs-In-Charge.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts ,complete all as specified and as directed by Engrs-In-Charge.

Supply & fix exhaust ventilation fan of sweep 300mm (300 mm 45 Watt, 1350 RPM, 1150 CMH, Gray colour with specially designed metal blades), 240 volts, metalic body, BEE 5 star rated, ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 40 mm bore GI tubing Light grade ISI marked for protection of cable including necessary joint, complete all as specified and as directed.

Supplying and fixing two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and as directed. Note : Quoted rate deemed to be included for necessary chasing/cutting and making good the surface.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and as directed. Note : Quoted rate deemed to be included for necessary chasing/cutting and making good the surface.

Supply & fixed 01x 18 W LED batten light fittings, with T-8 tube, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete,complete all as specified and as directed by Engrs-In-Charge.

Supply and fixed 10 W bulk head luminaries including LED bulb holder with LED bulb connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixed 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection ,complete all as specified and as directed by Engrs-In-Charge.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, complete all as directed and as directed.

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and as directed.

Supply and fixed MCB SP, 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and as directed.

Supply and fixed MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and as directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Supply and fixing of electric water heater storage type 25 Ltrs 5 Star rating vertical type with all fixing arrangement including nuts & bolts etc.,complete all as specified and as directed by Engrs-in-Charge.

M&L for 15 mm bore GI tubing medium grade ISI marked in wall/ceiling/floor etc including necessary joint, complete all as specified and as directed.

S&F Stop valve 15mm fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe ,complete all as specified and as directed by Engrs-In-Charge.

S&F PVC Connections 15 mm size with PTMT nuts of length 300 mm long, ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

Supply and fix in repair's for 25 mm bore GI tubing medium grade in trenches/floor/pillar connection in old or new position including fittings, complete all as specified and as directed.

Supply and fix in repair's for 40 mm bore GI tubing medium grade in trenches/floor/pillar connection in old or new position including fittings, complete all as specified and as directed.

Supply and fix in repairs 25mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty ISI marked for iron pipes complete all as specified and as directed.

S&F in repairs Rotational/moulded Polyethyne water tank of capacity 500 ltr(Cylindrical, vertical with closed top) hosisted and fixed in position', complete all as specified and as directed.

S&F in repair's Ball brass valves, high pressure, with polythene float and flynut complete, screwed for inron pipe or brass ferrule for 25mm bore pipe complete all as specified and as directed.

SCHEDULE OF CREDIT

M/S KUMAR AVINASH

M/S MADAN MOHAN KAKAR

HIGH HILLS INFRA

M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd