Strengthening of B03 belt with dual drive head at Khottadih Colliery.

Amount

Strengthening of B03 belt with dual drive head at Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of 190 mtrs 1000 mm width, 110kW Belt Conveyor at B03 to 70L/9D which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1400 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 7.5 MT 3) Transportation, Carrying from Surface & Fitting 1 nos. of load table one for Discharge & 2nd for Tail End& decking plate – 1.5 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Fitting Complete 140 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -110Kg-per-mtr, - 15.4MT

Fabrication of one no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of tail-end assembly which including labour cost, oxygen, DA and welding

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , and Tail End. – 40 Nos

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

Fencing of Drive Head and Tail End

Consumable Nut & Bolt 5/8 “X 2“ -140 Kg ; Plain washer- 10 Kg

Hanging by vartical support 30 mtr. length conveyor structure providing M.S. channel

Dismantling and carrying with transportation of discharge head (800 X 1400mm) with deck plate, chute, scrapper and 08 nos. of girder (100 X 200mm) from B03 Belt in R-IV seam to surface site

Dismantling and carrying with transportation of discharge drive unit (Drive, Gearbox, motor) including base frame from B03 belt in R-IV seam to surface

Dismantling and carrying with transportation of 01 no. to load table (hopper) and tail end set with decking plate from B03 in R-IV seam to surface

Dismantling and carrying with transportation of loop take up with winch & bend pulley frame from B03 in R-IV seam to surface

Dismantling and carrying with transportation of 140 mtrs conveyor structure with top & bottom roller from B03 belt in R-IV seam to surface

Dismantling and carrying with transportation of 1000 mm wide 280 mtr PVC belting from B03 belt in R-IV seam to surface

Dismentling of one tail-end assy. from B03 belt in R-IV seam & carrying to surface

Cleaning of coal for Discharge, Drive, Hopper & Tail end set from B03 belt

Total impact of GST for the purpose of CTC

NANDI ENTERPRISE

SABIR CONSTRUCTION