WELCOME MAINT TO OFFRS MD ACCN AT LGJ MIL STN

Amount

M&L for preparation of old plastered surfaces of wall and applying a coats of acrylic distemper (any colour/tint) on wall surfaces complete on wall all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered surfaces and applying one coat of white wash on wall (any colour/tint) surfaces complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered ceiling surfaces and applying one coat of white wash (any colour/tint) on ceiling surfaces complete all as specified and directed by Engr-in-charge.

M & L for applying two coat of acrylic distemper over a coat of primer and over and including 2 mm thick wall care putty preparation old painted surfaces including complete removal of existing treatment with help of mechanically and unaproachable or uneven area shall be removed manually including removal of spiashes on glass panes, furnitur and floors with water complete all as specified and directed by Engineer-in-charge

M&L for preparation of existing old ceiling surfaces and applying one coat of oil bound distemper (any colour/tint) on ceiling surfaces complete all as specified and directed by Engr-in-charge.

M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of old surfaces with one coat of synthetic enamel paint ordinary tint all as spefified and directed

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (any colour/tint) complete all as specified and directed by Engr-in-charge.

S&F 3.0 mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane including fixing upto second storey building window with necessary stair arrangement and safety arrangement to fixing upper glass panes shall deemed to be included int he rate and including hacking out broken glass complete all as specified and directed by Engr-in-charge.

S & F 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane incl fixing upto second storey building window with necessary scafoolding arrangement and safety arrangement to fixing upper glass panes shall deemed to be included in the rate and hacking out old brocken glass of any description complete all as specified and directed by Engr-in-charge.

S& F in repairs stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.40mm and fixed with tinted tacks or stainless steel wire staples fixed to wooden/steel shutters complete all as specified and directed by Engr-in-charge.

S & F in repairs18/19mm pre-laminated particle board exterior grade , prelaminated both side with decorative choice lamination & other side balancing white lamination fixed with screws including 6mm thck teak wood lipping fixed with head less nails/screws as in cupboard shutter and including two coat of synthetic enamel paint over a coat of primer on beading surfaces complete all as specified and directed by Engr-in-charge.

S & F continuous (Piano) hinges mild steel bright finsh or electro galvanised, width of flap when open 30mm complete all as specified and directed by Engr-in-charge.

S&F in repairs brass chromium plated cup board knobs 40 mm size with all fixing screws etc complete all as specified and directed by Engr-in-charge.

S & F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed complete all specified and directed.

S&F drapery stainless steel rods, standrad quality, not less than 25mm dia with heads, etc. complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore Bib taps chromium plated cast copper alloy with capastan head screwed for iron pipe or brass ferrule complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I

S&F in repair 15mm bore Pillar taps chromium plated cast copper alloy with capstan heads, screwed down, high pressure with or without catered 'Hot' or 'Cold' with long screwed sheuks and flynuts, screwed for iron pipe complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I

S&F in repair stop cock 15mm bore cast copper alloy cromium plated fancy type, screwed down, high pressure with capastan head, screwed both ends for iron pipe or for union complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I

S&F in repair 125 mm dia chromium plated shower rose with or without swivel joints for fixing to15mm bore pipe etc complete incl taking down old one complete all as specified and directed by Engneer -in-Charge

S&F in repair 3-in-1 wall mixer for hot and cold water supply with telephonic shower arrangement, cast copper alloy chromium plated fancy type, screwed down for iron pipe including necessary fittings & fixtures etc. complete all as specified and directed by Engneer -in-Charge

S & F in repair of kitchen mixer with with 450 mm long braided hoses system, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for wash hand basin, screwed down for iron pipe 15 mm bore including taking down old valve and type completed all as specified and as directed by Engineer-in- Charge Note : The minimum weight of valve shall be given in SSR or in relevant IS

S & F in repair center hole wash hand basin mixer with 450 mm long braided hoses system, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for wash hand basin, screwed down for iron pipe 15 mm bore including taking down old valve and type completed all as specified and as directed by Engineer-in- Charge Note : The minimum weight of valve shall be given in SSR or in relevant IS

S&F in repair stainless steel kitchen plate rack, made out of 1.00mm thick sheet for size 900x1200x200mm fixed on wall with screw, washers complete all as specified and directed by Engneer -in-Charge

S&F in repair CP health faucet with CP flexible cord fixed on wall complete all as specified and directed by Engneer -in-Charge

S&F in repair two way angle cock double handle with flages fancy type, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15mm bore complee, all as specified & directed by Engineer-in-charge Note : The minimum weight of tap shall be as given in SSR or in relevant IS

S & F in repair PVC waste pipe low density 32 mm dia for WHB/Sink/urinal complete all as per specified and directed

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repair CP towel ring of size 150 mm decorative type fixed with walls complete all as specified and directed by Engneer -in-Charge

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern, & flush pipe complete all as specified and directed by Engneer -in-Charge

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe complete all as specified and directed by Engneer -in-Charge

S & F in repair cabinet mirror of size 400mm X 500 mm fixed with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engneer -in-Charge

M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floor etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

Material and labour for Non Skid ceramic coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, laid in floor. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick rendering in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over 20 mm thick screed bed in CM 1 : 6 complete all as specified and directed by Engneer -in-Charge

Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and directed by Engneer -in-Charge

All as per serial item No __ above but 20mm dia pipe complete all as specified and directed by Engneer -in-Charge .

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engneer -in-Charge

All as per item No 39 above but 20 mm dia pipe complete all as specified and directed by Engneer -in-Charge .

Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

Taking down cement plaster/terrazoo on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed

M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engneer -in-Charge .

M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and smooth without using extra cement complete all as specified and directed by Engneer -in-Charge .

M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engneer -in-Charge .

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n.exc 4.0 sq. m each complete all as specified and directed by Engneer -in-Charge .

Taking down Shutters of any description exc 1 Sqm and n exc 2.00 sq. m eachs complete all as specified and directed.

S&F powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO

S & F Powder coated anodised aluminium window and ventilator shutters, partiall fixed and partially 3 track sliding with out sash bars which are two shutter having tinted glass of 4.8 mm thick and 3rd is stainless steel wire cloth 0.63 mm normal dia of wire and average width of apertune 1.40 mm, aluminium sections weighing 0.55 kg/m (1.50 to 1.80 mm thick) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F for Aluminium anodised (Powder coated) Three track sliding window frame with shutters (two glazed and one gauged shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for frame (i) Top and verticals 92 x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick(iii) 'H' section 41 x 20 x 1.10 mm thick Make: Jindal or equivalent sections of Hindalco.

S & F powder coated standard aluminium anodised grill size of mesh 75 mm x 75 mm and 2 mm thick section using U channel 25 x 12 mm all as specified and directed

Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.

Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.

S & F framed work as in chowkhats of doors windows of angle iron, gates or other section with gusset plates, rails, braces etc confirming to Gde Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in- Charge

S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engneer -in-Charge .

S&F 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

S&F 100 mm long butt hinge, extruded stainless steel with stain less steel hing pin, complete all as specified and directed by Engneer -in-Charge .

S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engneer -in-Charge .

S&F 150 mm long extruded aluminium alloy handle,D type anodised complete all as specified and directed by Engneer -in-Charge .

S&F 100 mm long butt hinge, medium weight, cold rolled mild steel complete all as specified and directed by Engneer -in-Charge .

S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed complete all as specified and directed by Engneer -in-Charge .

S&F for 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engneer -in-Charge .

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engneer -in-Charge .

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 450mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated stainless steel fancy type soap dish complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair glass corner shelf with CP brackets and CP railingcomplete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered wall surface and treating with a coats of weather proof exterior emulsion paint (Apex ultima or equivalent) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered wall surface and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered and applying two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of primer over 3 mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

ram rattan dass aggarwal