MAINT OF JOINERY OF ACCN IN AKHNOOR MIL STN UNDER GE (SOUTH) AKHNOOR.

Amount

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each, complete all as specified.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each, complete all as specified.

Taking down shutters of any descriptions area exceeding 1.00 Sqm but not exceeding 2.00 Sqm, complete all as specified and directed by Engineer-In-Charge.

Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed by Engineer-In-Charge.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 105x60mm, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete M-10(1:3:6), type C-1, (using 20mm graded crushed stone aggregate), nominal mix, as in cills, steps; plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates and in hold fasts or filling in hollow of steel frame, including necessary form work, complete all as specified and as directed by Engineer-In-Charge.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing in SSR, complete all as specified and as directed by Engineer-In-Charge.

Flush shutters, thickness 40mm, solid core construction, with block board core and plywood face panels, commercial type on both sides, having external teak wood lipping, 6mm thick fixed with nails, complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified.

Supply and fixing of cupboard shutter 20mm thick (style) factory made panel PVC incl chowkat frame made out of m.s tubes 19 gauge for top and bottom rails m.s frame shall be covered with heated moulded plain colour PVC © channel having a PVC sheet strip of 10mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side 10mm (5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottom rail. Panelling for plain colour PVC sheet to be fitted in the m.s frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying fixing in the frame at site as per specification and drawing.

Supply and fixing as in repairs 18/19 mm thick block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work as in shelves of cupboard srawers etc complete all as specified and as directed.

S&F for external teak wood lipping, 6mm thick fixed with nails over block board or veneered particle board for cupboard self.

Glazed and skeleton shutters open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified 35mm thick 2nd class HW.

Anodised aluminium powder coated (minimum thickness of powder coating 50micron) openable door shutters with comprising bottom rail section of frame not less than 111.6x44.75 and 2.44mm thick, top rail section 105x44.45 and 2.20mm thick, lock rail 150x44.5 and 3.0mm thick, with door handle locking system (Godrej/ Link/ Harrison), door frame not less than 2.34 Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing,150mm long handles 2 Nos, 100mm hinges type B-21 (02 Nos), 150mm long tower bolts (02 Nos) in each door, anodised aluminum snap beading screws etc and fixing 5.50mm thick plain glass sheet with rubber packing/ beading, complete all as specified and as directed by Engineer-In-Charge. Note : Cost of door frame, shutter, as directed by Engr-in-Charge and other filling material in panels shall be deemed included in quoted rate.

S&F Anodised aluminium window and ventilator shutters powder coated, comprising gauged and glazed skeleton shutter, side hung type without sash bars, aluminium sections weighing 0.55 Kg/mtr including window frame weight not less than 2.41 Kg/RM incl necessary joining cleats, glazing clips, anodised aluminum snap beading screws , aluminium wire cloth of nominal dia of 0.45mm and average width of aperature 1.40mm fixed fixing 5.50mm thick glass sheet incl Anodised aluminium powder coated grills of 5-8mm dia incl anodised aluminium fittings such as peg stay 150mm long (01 No), 100mm hinges type B-21 (02 Nos), handle 100mm long 02 Nos in each shutters, complete all as specified and as directed by Engineer-In-Charge. Note : Cost of frame as directed, shutter, glass, wire cloth, grills and other filling material in window/ventilator shall be deemed to be included in quoted rate and nothing extra shall be admissible on this account.

S&F aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built including 4 to 5.5 mm thick aluminium composite sheet of plain or coloured of ordinary quality and fixing with rubber gasket and alumium angular fillets including all fittings in each pane complete all as specified and directed. Note : Cost of aluminium partition ,composite sheet and other filling material in panels shall be deemed included in quoted rate. Grid of partition panels shall be desided by engr-in-charge.

Factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and plain sheet glass 3.0mm thick, 4mm thick frosted glass, jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1517/15, sheet No- 1/3 to 3/3 and as directed by Engineer-In-Charge. Note :- Cost of window shall include all members and spare parts as elaborated in the Drwaing and in the specifications and nothing shall be paid extra seperately.

Factory made steel Ventilator, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and plain sheet glass 3.0mm thick, 4mm thick frosted glass, jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1517/15, sheet No- 1/3 to 3/3 and as directed by Engineer-In-Charge. Note :- Cost of window shall include all members and spare parts as elaborated in the Drwaing and in the specifications and nothing shall be paid extra seperately.

S&F sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm Each pane 4mm thick including hacking out old broken glass from matel frame, complete all as specified and directed.

S&F Galvanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples.

S&F in repair Galvanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples.

S&F Butt hinges, medium weight cold rolled mild steel and fixed 100mm long.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200mm long

Aluminium handles cast type anodised 150mm long.

S&F 300mm brass ordinary rat tail rod pattern spring including roller plate complete all as specified and as directed by engineer in charge.

Aluminium alloy anodised sliding door with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 250mm long.

S& F in reapirsHasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed .

Floor doors stoppers of aluminium alloy body and tenque anodised with hard drawn steel spring fixed in floor 150mm long.

S&F epoxy powder coated pelmet rods of mild steel 25 mm with and including pair of fancy type finnals complete fixed as in repair.

S&F Door closer aluminium body(diecast)hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Dismantling boarding, any description, fixed in any position with Screws

S&F for 5 mm thick PVC panelling fixed to wall/ceiling including corner lipping as per manufactute instruction complete all as specified and as directed

S&F in replacement of Kitchen cabinet size ( Length and Height as per space) and width shall not be less than 550mm, including partitions, shelves and drawers with brass sliding rails, door hanles, door catchers, over all cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated ply coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plsatic fasteners, having following specifications: (i) Outer frame made sixe 50mmx47mm with same board. (ii) Shutters both side PVC laminated termite proof board, 18/19 mm thick having contineous piano brass hinges of 30mm flap width with one No brass handle of 75mm including brass door catcher of not less than 50mm size in each shutter. (iii) Drawers made of both side PVC laminated termite proof board, 18/19 mm thick including brass handles of front and two sliding rails at sides in each drawer. (v) All cabinets, drawers, frames, partitions and boards shall be fixed at site with brass screws and PVC plugs of suitable sizes. Note: (a) Only face, outer diemensions (Length ,width and Height) at site, shall be measured and entered in MB irrespective of Nos of partitions or drawers. Cost of all partitions and hidden sides internally as required at site shall also be deemed to have included in quoted rates and nothing extra is admissible on this account. (b) Different No of partitions and drawers may be as per site reqirement with out any extra cost. (c) All labours and materials cost shall be deemed included in quoted rate.

S&F in replacement of Kitchen cabinet size ( Length and Height as per space) and width shall not be less than 450mm, including partitions, shelves and drawers with brass sliding rails, door hanles, door catchers, over all cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated ply coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plsatic fasteners, having following specifications: (i) Outer frame made sixe 50mmx47mm with same board. (ii) Shutters both side PVC laminated termite proof board, 18/19 mm thick having contineous piano brass hinges of 30mm flap width with one No brass handle of 75mm including brass door catcher of not less than 50mm size in each shutter. (iii) Drawers made of both side PVC laminated termite proof board, 18/19 mm thick including brass handles of front and two sliding rails at sides in each drawer. (v) All cabinets, drawers, frames, partitions and boards shall be fixed at site with brass screws and PVC plugs of suitable sizes. Note: (a) Only face, outer diemensions (Length ,width and Height) at site, shall be measured and entered in MB irrespective of Nos of partitions or drawers. Cost of all partitions and hidden sides internally as required at site shall also be deemed to have included in quoted rates and nothing extra is admissible on this account. (b) Different No of partitions and drawers may be as per site reqirement with out any extra cost. (c) All labours and materials cost shall be deemed included in quoted rate.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by engineer in charge.

M&L for 10mm thick rendering as in backing coat of tiles in cm 1:4 complete all as specified and as directed by engineer in charge.

M&L glazed ceramic coloured designer pattern tiles 300mm x 200mm x7mm thick on vertical surface such as skirt, Dado etc. set and jointed in white colour cement complete all as specified and as directed by engineer in charge.

S&F joint free non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by engineer in charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed by engineer in charge.

M&L for granite 20mm thick(table rubbed and polished) in cooking platform and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required complete all as specified and as directed by engineer in charge.

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

Amount of Schedule of credit of for Rs 38,198.00 shall be deducted from quoted amount.

Deepak Enterprises (BID ID -3094594)

M/s Shivam Construction Co (BID ID -3086203)