Loading…
Loading…
Tender Value
₹200.9 Cr
EMD Value
₹2.0 Cr
Closing Date
15 May 2026, 3:00 pmClosed
SE Bhadradri Kothagudem
Writer Basthi, Kothagudem
Redevelopment and Rejuvenation of Sree Seetha Ramachandraswamy Vari Devasthanam, Bhadrachalam including expansion and infrastructure Development of Temple Complex, Temple Precinct and immediate surrounding projects under Phase -I
699737
e NIT No.Bhadrachalam/CTN/DCE(R )/EE(R )/DEE1/AEE/2026-27, Dt: 02.05.2026
OPEN
Civil Engineering Works
BHADRADRI KOTHAGUDEM
19 documents required · 19 mandatory
₹29,500
₹2.0 Cr
9 May 2026
9 May 2026
9 May 2026
Dismantling works
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for RCC work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolishing and disposal of Unreinforced cement concrete upto 15 cm thicknes including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc.,complete and stacking them within 100 metre lead Not exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead Exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Kadapa slabs or shahabad stone slabs on sand bed including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Stone masonry in cement mortar including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Carefully dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. Including contract profit for finish item of the work
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead as per direction of Engineer-incharge. Including contract profit for finish item of the work.
Demolishing and disposal of Unreinforced cement concrete more than 15 cm thickness including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Excavation for roadway in hard rock (requiring Control blasting) by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of Hnes,grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres.
Excavation for roadway in hard rock ( blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal within all lifts and leads upto 1000 metres trimming bottom nd side slopes in accodance with requirements of lines grades and cross sections
Conveyance for Carting away of debries to an average distance of 10 KM using mechanical means for disposal as per the instruction of the Engineer-in-charge including cost and conveyance of all materials, all operational, incidental labour charges and overheads & contractors profit complete for finished item of work.
Salvage Value of HYSd steel in RCC slab & beams
Salvage Value of MS CRCAD Door frame with flush shutter
Salvage Value of Windows/ventilators with glazed shutters
Salvage Value of Brick work
Salvage Value of Stone Masonary work
Salvage Value of G.I Sheets Roofing work
Salvage Value of Structural Steel work
Civil Works of Temple Complex
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.-Upto 3 M depth
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means. -Upto 3 M depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.- Footings
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. -Plinth Beams
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - for Steps Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - for Steps First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. - for Steps Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 3.66m Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 3.66m First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.27m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.27m - First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.27m - Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 6.10m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 6.10m - First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 6.10m - Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.88m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.88m - First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 4.88m - Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 7.32m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 7.32m - First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 9.15m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.RCC walls -230mm thk - un-supported height of 3.66m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.RCC walls -300mm thk - un-supported height of 4.27m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.RCC walls -300mm thk - un-supported height of 6.10m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.RCC walls -300mm thk - un-supported height of 6.10m - First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.RCC walls -300mm thk - un-supported height of 9.15m - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 3.66m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 3.66m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.27m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.27m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.27m -Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 6.10m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 6.10m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 6.10m -Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.88m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.88m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 4.88m -Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 9.15m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 7.32m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams - un-supported height of 7.32m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 4.27m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 4.27m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 4.27m -Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 6.10m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 6.10m -Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 4.88m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 4.88m -Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 4.88m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 6.10m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 9.15m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 7.32m -Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 200mm thk - un-supported height of 7.32m -First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 250mm thk - un-supported height of 7.32m -Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-First Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Second Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) Third Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Ground Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -First Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Second Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Third Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-Ground Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-First Floor
RCM facia 50mm thick in CM (1:3) (with 50% river sand & 50% manufactured sand) using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site, all operationals &incidental charges,cost and conveyance of cement,wire mesh,water to work site,centering,scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)-Ground Floor
RCM facia 50mm thick in CM (1:3) (with 50% river sand & 50% manufactured sand) using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site, all operationals &incidental charges,cost and conveyance of cement,wire mesh,water to work site,centering,scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)-First Floor
RCM facia 50mm thick in CM (1:3) (with 50% river sand & 50% manufactured sand) using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site, all operationals &incidental charges,cost and conveyance of cement,wire mesh,water to work site,centering,scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)-Second Floor
RCM facia 50mm thick in CM (1:3) (with 50% river sand & 50% manufactured sand) using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site, all operationals &incidental charges,cost and conveyance of cement,wire mesh,water to work site,centering,scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)-Third Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Ground Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Second Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Third Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Ground Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-First Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Second Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Third Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Ground Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-First Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Second Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Third Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-First Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-Second Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-Third Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-Fourth Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-Ground Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-First Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-Second Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-Ground Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-First Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-Second Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)-First Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)-Second Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-First Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-Second Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Ground Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-First Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Second Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Third Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-Ground Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-First Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-Second Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-Ground Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-First Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-Second Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
Supplying and fixing 14 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 170*150 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 8 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 2.44 X 2.74m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 8 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 8 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 2.00 X 2.44m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.83 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.22 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.07 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.91 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.83 X 2.13m)
Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.
Painting to flush shutters two coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 6mm MS flat welded with 10mm X 10mm square bar rods placed at 4" and 2" c/c (alternate spacing) fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site, all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
Supplying and fixing of MS doors, grill to windows, ventilators / in open court yards using MS square bars, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work.
Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.
Providing Pancha colour paint two coats over primary coat to Vigrahams or temples with best synthetic enamel paint (Apco light, Asian / Brazer make) as per approved matching colour including cost and conveyance of all materials, labour charges, brushes etc., complete (as per Silpi Standards). But excluding seigniorage charges and taxes like GST etc.
Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete.
Dressing and carving of Cut Stone Flooring works in granite stone for Fine Dressing - Five line Palamana Dressing for Granite stone not less than 12"x 24" uniform size and thickness not less than 4"
Jointing of Cut Stone Flooring works in granite stone.
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - 1 to 20 Cft
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - 20 to 40 Cft
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - 40 to 60 Cft
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - 60 to 80 Cft
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - 80 to 100 Cft
Supply of Hard granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi)-Cost of stone - above -100 Cft
Rough Dressing of Temple Structures
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Prakaram walls
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Salaharam
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Tritala Gopuram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple C VANAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple UPAPEETAM KAPOTHAKAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple ADHISTANAM Padmajagathl ln Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple UPAGREEVAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple Steps of Stone Columns Pillar (CHITRAKANTA STAMHAM)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Garuda Temple Steps of Stone Columns Puspa Pothikas -4
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - UPAPEETAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - Pillar (CHITRAKANTA STAMBHAM)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - Pushapothika with 2 sides
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - Eludhakam inside beams
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Ramakoti Samarpana & Punarvasu Mandapam - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - ALLROUND PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - PODIKAS CORNER (Pushpapothika with 3 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - ALLROUND BEAMS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala HIGH ROOF MANDAPAM - PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala HIGH ROOF MANDAPAM - PODIKAS (Pushpapothika with 3 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala HIGH ROOF MANDAPAM - BEAMS (Eldhukam with Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala HIGH ROOF MANDAPAM - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Arjitha & Daiva Yaga shala HIGH ROOF MANDAPAM - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - C VANAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL:- KARNAKOOTAM-1
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - KARNAKOOTAM-2
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -EAST SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - C VANAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL:- KARNAKOOTAM-1
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - KARNAKOOTAM-2
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -NORTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - STEPS (Inside, walls & Roof)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - FULL PILLARS (Chithrakanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - PODIKAS (Pushpa Pothika with 4 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - HALF PILLARS (Chithrakanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - PODIKAS (Pushpa Pothika with 3 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - VERTICAL BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - HORIZONTAL BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - KODUNGAI:-
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKARA MANDAPAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - WINDOWS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-E PRAKAM WALL - IN SIDE PRAKARAM WALL
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - AADHARA PEETAM (Chithra Vanam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - UPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - UPAUPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - ROOF STONES:
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - TEMPLES IN N-E PRAKARA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - UPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - UPAUPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - ROOF STONES:
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ADDALA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - AADHARA PEETAM (Chithra Vanam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - UPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - UPAUPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - ROOF STONES:
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - RECTANGLE TEMPLE IN N-E PRAKARA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - C VANAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM - ABOVE ROOF LEVEL:- KARNAKOOTAM-1
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- KARNAKOOTAM-2
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -SOUTH SIDE 3 STORIED RAJAGOPURAM ABOVE ROOF LEVEL- SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - FULL PILLARS (Chithrakanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - PODIKAS (Pushpa Pothika with 4 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - HALF PILLARS (Chithrakanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - PODIKAS (Pushpa Pothika with 3 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - VERTICAL BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - HORIZONTAL BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - KODUNGAI:-
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKARA MANDAPAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - WINDOWS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -S-E PRAKAM WALL - IN SIDE PRAKARAM WALL
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - ADHISTANA Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - UPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - UPAUPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - ROOF STONES:
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN S-E PRAKARA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - INSIDE PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - STEPS (Inside, walls & Roof)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - FULL PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - PODIKAS (Pushpapothika with 2 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - HALF PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - PODIKAS (Pushpapothika with 2 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - VERTICAL& HORIZONTAL BEAMS (Eldhukam with Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - KODUNGAI:-
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAMANDAPAM - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - ADHISTANAM Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - STHAMBHAVARAGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -N-W & S-W PRAKARAM WALL - WINDOWS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - AADHARA PEETAM (Chitra Vanam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - ADHISTANAM Padmajagathi in Mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - UPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - UPAUPAGREEVAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - ROOF STONES:
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -TEMPLES IN N-W & S-W PRAKARA MANDAPAM - STEPS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ALLROUND PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - UPAPEETAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ADHISTANAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ABOVE ROOF LEVEL KARNAKOOTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - PRASATARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - MANDAPAM ALLROUND PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - PILLARS (Chithrakanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - PODIKAS (Pushpapothika with 4 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ALLROUND BEAMS VERTICALS (Eldhukam inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - HORIZONTAL BEAMS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Sri Lakshmi Tayaru Ammavaru Temple & Sri Andal Ammavaru Temple - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - UPAPEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - PODIKA (Pushpapothika with 2 sides)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - BEAMS (Eldhukam with Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Amavasya, Dwadasha, Pavitrotsava, Sathumorai & Adyanotsava Madapam - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - ALLROUND PEETAM (Upapeeta Kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - PILLARS (Chithra Kanta Sthambham)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - PODIKAS (Pushpapothika with 2 sides )
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - KODUNGAI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - VYALAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - SALAHARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - ARCHES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Bhadragiri Mukha Mandapam - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - UPAPEETAM (Upapeeta kapothakam)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ADHISTANAM Padmajagathi in mukapatram
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - STHAMBHAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - INSIDE PEETAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - INSIDE PILLARS
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - BEAMS (Eldhukam Inside Beams)
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ROOF STONES
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- 1 KARNA KOOTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- :- 1 PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- 2 KARNA KOOTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- 2 PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- 3 KARNA KOOTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- 3 PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- :- 4 KARNA KOOTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- :- 4 PRASTARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- KANTAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- SHIKARAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL:- SIDE MAHA NAASI
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL: - NAASI TALA
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing - Five Storied West Raja Gopuram - ABOVE ROOF LEVEL: - FRONT AND REAR NAASI GUDU
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - ASWAPADAM FOR MAIN PILLAR
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PADAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PODIKA LAYER
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - KAPODAKAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - ASWAPADAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - BALAPADAM PILLAR
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PEETAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - SIMHAM SITTING
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - UPAGREEVAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - MUSTIBANDAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - TOP PODIKA LAYER
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - ABOVE PODIKA BEAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - ASWAPADAM FOR MAIN PILLAR
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PADAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PODIKA LAYER
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - KAPODAKAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - ASWAPADAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - BALAPADAM PILLAR
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - PEETAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - SIMHAM SITTING
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - UPAGREEVAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - MUSTIBANDAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - TOP PODIKA LAYER
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -FOR 3 BALAPADAM DETAILS - ABOVE PODIKA BEAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - ASWAPADAM FOR MAIN PILLAR
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PADAVARGAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - PODIKA LAYER
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -ANIVOTTI PILLAR FOR 1BALA PADAM - KAPODAKAM
Dressing and Carving of Temple Structures in granite stone for Palmana fine Dressing -Upagreevam for Main Temple - Upagreevam
Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Jointing Charges for Temple Structures
Supplying and fixing of Somasutram with Yatkal
Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete.
Providing of 80 tonnes Crane Charges for Lifting of Stone material purpose including overheads & contractors profit etc.
Supplying and fixing of COPPER STHOOPI Upto 5'-O" ht (16 to 18 gauge)
Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 7'-0" Height
Supply of Hard granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame above 7'-0" Height
Rough Dressing for Door Frames in granite stone
Door Frames in granite stone for Palmana Fine Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones.
Fixing Charges -Upto 7'-0" Height Door Frames in granite stone
Fixing Charges - Above 7'-0" to 9'-0" Height Door Frames in granite stone
Supplying and fixing of STONE VIGRAHAMS IN SALAHARAM ARCHES (Vigraham with Four Hands above 2' to 4' )
Supplying and fixing of Brass STHOOPI Upto 2'-O" ht (16 to 18 gauge)
Supply of Hard granite stones of various sizes for Rajagopuram - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 9'-0" to 12'-0" Height.
Rough Dressing for Door Frames in granite stone - Three Storied Rajagopuram
Door Frames in granite stone for Palmana Fine Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones. - Three Storied Rajagopuram
Fixing Charges for Door Frames- Three Storied Rajagopuram
Supplying and fixing of STONE VIGRAHAMS 4 HANDS above 4' to 6' Height
Supplying and fixing of SIMHAMS UP TO 2'-0" - Length wise 1' to 2' ft
Supply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with Eight leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. (Padmam & Padmarekulu) with 8 leaves (Padmam 3 rows).-Material Charges
Supply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with Eight leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. (Padmam & Padmarekulu) with 8 leaves (Padmam 3 rows).-Labour Charges
Supplying and fixing of Copper Sthoopi upto 4'-0"
Supply of Hard granite stones of various sizes for Rajagopuram - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) - Door Frame upto 12'-0" to 16'-0" Height
Rough Dressing for Door Frames in granite stone - Five Storied Rajagopuram
Door Frames in granite stone for Palmana Fine Dressing - Five Line Palmana instead of fine Dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones. - Five Storied Rajagopuram
Fixing Charges for Door Frames- Five Storied Rajagopuram
Supplying and fixing of scaffolding up to 20'0" ht. including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., complete as directed by the Engineer in charge
Dismantling of Chirtakuta mandapam, stone/silpi elements and reassembly using 80 tonnes Crane with utmost care, properly numbered complete as directed by the Engineer in charge.
Civil Works of Temple Surrounding Structures
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.-Upto 3 M depth
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means.-Upto 3 M depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING -Ground Floor
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING -First Floor
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-Footings
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Grade Slab -150mm thk
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-Plinth Beams
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-steps-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-steps-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-steps-Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-steps-Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps.-steps-Fourth Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 3.66m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 3.66m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 3.66m-Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 3.66m-Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 4.27m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Columns - un-supported height of 4.27m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 8.54m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns Columns - un-supported height of 9.15m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS RCC walls -230mm thk - un-supported height of 3.66m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS RCC walls -230mm thk - un-supported height of 3.66m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS RCC walls -230mm thk - un-supported height of 3.66m-Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS RCC walls -230mm thk - un-supported height of 3.66m-Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS RCC walls -230mm thk - un-supported height of 3.66m-Fourth Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 3.66m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 3.66m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 3.66m-Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 3.66m-Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 3.66m-Fourth Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 4.27m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 4.27m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 8.54m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Beams - un-supported height of 9.15m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 3.66m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 3.66m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 3.66m-Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 3.66m-Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 3.66m-Fourth Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 4.27m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 4.27m-First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 8.54m-Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.-Slab 150mm thk - un-supported height of 9.15m-Ground Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Lintels - un-supported height of 3.66m-Ground Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Lintels - un-supported height of 3.66m-First Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Lintels - un-supported height of 3.66m-Second Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.-Lintels - un-supported height of 3.66m-Third Floor
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) -Chajjas / Sunshades- 75mm thk - un-supported height of 3.66m-Ground Floor
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) -Chajjas / Sunshades- 75mm thk - un-supported height of 3.66m-First Floor
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) -Chajjas / Sunshades- 75mm thk - un-supported height of 3.66m-Second Floor
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) -Chajjas / Sunshades- 75mm thk - un-supported height of 3.66m-Third Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-First Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Second Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Third Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)-Fourth Floor
CR stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using hard granite stones from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Ground Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -First Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Second Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) -Third Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-Ground Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-First Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-Second Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-Third Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)-Fourth Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc.-Ground Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc.-First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Ground Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Second Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-Third Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Ground Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-First Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Second Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Third Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)-Fourth Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Ground Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-First Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Second Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.-Third Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-First Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-Second Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).-Third Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-Ground Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-First Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)-Second Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-Ground Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-First Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering.-Second Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)-Ground Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)-First Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)-Second Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-Ground Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-First Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.-Second Floor
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-Ground Floor
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-First Floor
Providing skirting to internal walls with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)-Ground Floor
Providing skirting to internal walls with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)-First Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Ground Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-First Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Second Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)-Third Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-Ground Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-First Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special)-Second Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-Ground Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-First Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)-Second Floor
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.-Ground Floor
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.-First Floor
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.-Second Floor
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.-Third Floor
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work.-Fourth Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty-Ground Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty-First Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty-Second Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty-Third Floor
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
Supplying and fixing 14 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 8 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 8 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 2.44 X 2.44m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.83 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.52 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.52 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.22 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.07 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.91 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.83 X 2.13m)
Providing and fixing factory-made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58- 60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge and Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long & 4 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Single Shutter Door size 0.76 X 2.13m)
Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.
Painting to flush shutters two coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 6mm MS flat welded with 10mm X 10mm square bar rods placed at 4" and 2" c/c (alternate spacing) fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site, all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work.
Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work.
Providing Pancha colour paint two coats over primary coat to Vigrahams or temples with best synthetic enamel paint (Apco light, Asian / Brazer make) as per approved matching colour including cost and conveyance of all materials, labour charges, brushes etc., complete (as per Silpi Standards). But excluding seigniorage charges and taxes like GST etc.
Site Development works (Roads and Footpath, Utilities, UG Sump)
Earthwork excavation in soils upto SDR by mechanical means including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete including for finished item of work for trench cutting as per MoRT&H specification 301(5th Revision) and as directed by the Engineer-in-Charge
Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including seignioarge charges for finished item of work as per MoRT&H specification 304(5th revision) and as directed by the Engineer-in-Charge .
Construction of Embankment & Subgrade with material obtained from borrowed useful earth from outside road boundary MDD of 18 KN/Cum , CBR ≥ 10%, PI < 18%, by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P, complete for finished item of work as per MoRT&H specification 305 (5th revision). Note: The work of embankment and subgrade shall be carried out as per Plan & Profile and Payment will be based on levels for finished item of works
Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels)
Providing Vibrated Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement.
Construction of Cement concrete Road with VCC M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge for C.C Pavement.
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge ffor table drain and central road divider block.
Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement.
Supply, Laying and Fixing of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work.
Supply, Laying and Fixing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work.
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 440 mm high as shown in drawing in M 20 grade PCC, kerb stone laid with kerb laying machine, all complete as per clause 408
Painting 2 coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface as per Tech Specification 800 MORTH (5th revision) and as directed by the Engineer in charge.
Groove Cutting of 2-4 mm for 1/3rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24 hours of casting of CC Pavement - 100mm to 200mm thick.
Vibrated cement concrete M20 Grade Concrete using 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) and conveyance of all materials to site and all labour charges , centering, machine mixing, laying in position, Compacting, Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification1500,1700, 2200 (5th Revision) for foundation and Side walls
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per SBD specification as directed by the Engineer-in-Charge for Cover Slab
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means Upto 3 M depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Conveyance of un-useful excavated earth to an average distance of 1 KM using mechanical means with unloading by manual means within the construction site for disposal and filling & levelling of low lying areas as per the instruction of the Engineer-in-charge including cost and conveyance of all materials, all operational, incidental labour charges and overheads & contractors profit complete for finished item of work.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Bottom slab, Haunch Concrte. -for Bottom Slab
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Bottom slab, Haunch Concrte. for Haunch Concrete
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR RCC WALLS- 230mm thk - Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. - Top Slab 175mm thk - Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) -Ground Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). - Ground Floor
Manufacture, supply, delivery and fixing of encapsulated plastic steps as per company’s standard specification including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes and others etc., as applicable, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.
Water Supply, Sanitary & Sewerage works
Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap : 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials , operational, incidental, labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P coated all of approved make, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm, fitted with 15 mm brass body CP finish self closing tap push type conforming to IS 1711 and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.
Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.
S&F of 15 mm premium variety Chromium plated finish brass body wall mixer with hand shower with a provision for over head shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges conforming to IS 8931 with 10 years warranty, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overhead & contractor's profit etc., complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) - 75mm dia Pipe
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) - 110mm dia Pipe
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.
Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work.
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 22.20mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 28.60mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 34.90mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 41.30mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge - 54.00mm OD Pipe - SDR 13.5
Supplying & Fixing of 50 mm Nominal Bore GI pipes Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge. - 50 mm Nominal Bore GI pipe
Supplying & Fixing of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent. - 65 mm Nominal Bore GI pipe
Supplying & Fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.
S&F of Chromium plated finish stainless steel body towel rail 24'' with 10 years warranty including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 3' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work for all floors.
Supply and fixing CP finish brass soap dish of approved make with screws, including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work.
Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work - 152.4 mm (6") dia
Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work - 203.2 mm (8") dia
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.. - NP-2 Class 150mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.. - NP-2 Class 200mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.. - NP-2 Class 250mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.. - NP-2 Class 300mm dia pipe
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth
Electro- Mechanical Works: EXPANSION OF TEMPLE COMPLEX
Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including masonary work and labour charges etc., complete. Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete. - Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. - Makes : Sudhakar / VIP / Precision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. - Wire Makes: Finolex / RR kabel / Havells - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona
Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. - Wire Makes: Finolex / RR kabel / Havells - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona
Supply and fixing of ISI Marked 6A/ 10A 3 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona
Wiring with run of 3 of Supply of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B. - Wire Makes: Finolex / RR kabel / Havells - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona
Supply and fixing of ISI marked 16A/6A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona
Supply and Run of 3 of 2.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply, transportation and fixing of 18 W +/-10% (>= 1800 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. - LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply ,transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. - LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient as approved by the Department. -
Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete. - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision - Supply of 9" (225mm +/-5%) Light duty exhaust fan with metal blades etc complete for ante rooms / individual toilets. - Makes : Crompton / Havells Ventilair-DSP / Orient hill air.
Supply of 9" (225mm +/-5%) Light duty exhaust fan with metal blades etc complete for ante rooms / individual toilets.
Supply, Transportation and Fixing of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark with all labour charges etc., complete as directed at site. - Makes : Crompton / Almonard / Havells Turbo Force SP.
Supply and fixing of GI louver shutter including GI mesh to avoid birds entry with necessary materials suitable for Exhaust fan.
Supply and fixing 6 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 18No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - Isolator Makes : Legrand-DX3 / Schneider-Acti9 - MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply and fixing 4 Way SPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 2 pole Incomer of 32A DP Isolator and 2No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 40 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - Isolator Makes : Legrand-DX3 / Schneider-Acti9 - MCB Makes : Legrand-DX3 / Schneider-Acti9
"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2) - Makes : D Link / AMP / Molex / Legrand / Krone.
Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. - Makes : D Link / AMP / Molex / Legrand / Krone.
Supply, installation, testing and commissioning of IP Based digtal Telephone (EPABX) system --- --complied with following specifications: > IP @ Core, PCM/TDM, Non blocking, > Must Support PRI, E1, Analog Junctions > Must Support PC Console, > Must support Mobile SIP (Android and I.O.S) > Must support Voice Mail > Must support Card based GSM > Inbuilt Call Details Software with search engine software > 4 Analog Trunks > 6 Digital Extensions > 48 Analog Extensions > 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) > Expandable to 64 Analog Extensions or more Approved Brands: NEC/ Alcatel/ Karel/ Unify
Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete. - Makes : Finolex / Delton / Surabi / Polycab
Supply and run of 20 Pair telephone Copper wire., in the existing PVC pipe including all labour charges etc complete. - Makes : Finolex / Delton / Surabi / Polycab.
Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.
Digital Key Telephone with 2 line display, 10 programmable keys, handsfree dialing
Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / TP Link / D link. / Legrand
Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply and fixing of 24 port patch panelswith IO Separate including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / D Link / Legrand / TPLink
Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete. Makes : Vallrack (Legrand) / Netrack.
Supply, Transportation and installation of 10.0KVA , 72VDC / 96V DC true on line UPS system IGB technology pure sine wave out put, with double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric / Emerson / Fuji Electric
Supply and fixing of 12V 65 AH SMF battery including wire leads Makes : Quanta / Racket / Exide.
Supply and providing of UPS cum battery rack 5 to 10 batteries
Supply, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 50Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorization to be submittedfor future maintenance and guarantee)
Supply, Installation, Testing and Comissioning of 2MP Bullet camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 60Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorisation to be submitted for future maintenance and guarantee)
Supply, Transportation, Installation, Testing and Commissioning of 5MP IR Speed Dome/PTZ, Optical zoom 30X, optical Zoom 16X, 5.3 ~159mm, P-Iris, 1/2.8" progressive CMOS image sensor, Min. Illumination 0.007 (color), S/N Ratio: 50dB, Electronics Shutter: 1/1 ~ 1/30000sec, Max 30 fps, IR Distance: up to 150M, WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%, Alarm 2 IN& 2 OUT; SD card up to 256GB, PAN Range/Speed: 0-360/.1 ~ 180/s deg, Tilt Range/Speed: -10 ~ +90/.1 ~ 90deg/s, 400 preset locations, 12 tours, 6 patterns; Video Compression: H.265 HEVC/H.264/MJPEG, Smart Codec; Triple Stream;30fps; Video analytics: People counting, intrusion, tampering,Loitering, Motion Detection, SMD; 2 way audio stream with full duplex Protocals: IPv4, IPv6, TCP / IP, HTTP, HTTPS, UPnP, RTSP / RTP / RTCP, IGMP / Multicast, SMTP, DHCP, NTP, DNS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS; User account and password protection, HTTPS, IP Filter, Digest authentication, TLS1.2 only, Stream encryption, AES128 / 256, SSH / Telnet closed, PCI-DSS compliance ONVIF: S/G/T; Op. Temp: -40 to 60 Deg; power consumption max. 25W; IP66/IK10/UL/NDAA, with required mounts including 5 yrs warranty Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS or equivalent as approved by Department
Supply and Installation Testing and commissioning of 64 Ch NVR with 8 SATA 10TB with following features: • Up to 64 channel Video Inputs • Up to 8 SATA interface • 200MBPS Video/Audio Incoming Bandwidth • 200MBPS Video/Audio Outgoing Bandwidth • Recording at up to 8 MP resolution • Supports live view, storage, and playback at up to 8 MP resolution • HDMI Video output up to 4K (3840 ×2160) resolution • H.264/MPEG4 video formats • Synchronous Playback upto 16-Ch. • Audio I/O • Alarms I/O Make: Honeywell/AXIS/MOBOTIX / Bosch
Supply and installation of Surveillance 8 TB Hard Disk Make : WD/ Seagate
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply, Installation, Testing and Commissioning of16 Port, 2 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ratio 4000:1, Response time 8ms, icluding 3 yrs warranty Approved Make : Samsung / LG or equivalent as approved by Department
Supply of unloaded 24 port patch panel with IO separate including all labour charges etc complete Makes : Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioningof 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox
Supply Installation of 7 feet length moulded patch cord including accessories and all labour charges etc complete Makes: Digisol / TP Link / D link. / Legrand
Supply and installation of IP 20, IK 08 17U floor 600mm Width x 1000mm Deep Floor mounting network rack with all accessories like front and rear doors, fans, castor wheels (2 with break and 2 without break), cable manager, cantilever shelf, horizontal and vertical wer distribution unit, monitor shelf, brush at cable entry and hardware packet, etc. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008.Netrack
Supply and installing HDMI cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site.
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 40 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.) 800A Alluminium Bus Bar with colour coded sleeves. (0.8A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 630A 4 Pole ACB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35 / 36 kA with thermal magnetic release Panel Mounted - 1 No Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V OUT GOING FEEDERS Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35 / 36 kA with thermal magnetic release Panel Mounted - 7 NoS Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 6 Nos Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V Supply of 50-63A 10KA TP MCB, C/D Curve ISI Mark.-9Nos Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.-4Nos Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH Metering : Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official). Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of LED indication lamps on the existing panel board. - 3 Nos b) Material Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Control wiring for MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). - Makes : Polycab / Havells KEI / Finolex
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). - Makes : Polycab / Havells KEI / Finolex
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). - Makes : Polycab / Havells KEI / Finolex
Supply of 10.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. - Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 70 to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 240Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 95Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 25Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 300Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department.
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 10Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
"Supply, transportation, installation, testing and commissioning of 26 passenger, G+3, 1.0m/s Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent " "Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4.0mtrs e)Head room Height : 4.5mtrs f)Lintel Height (Required) : 2240mm from finished floor level +/- 10% g)Number of persons : 26 P h)Rated Load : 1768 Kgs i)Number of Stops : 4 j)Number of Access sides : 1 k)Floor Designations : G, 1, 2, 3 " "l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : ...... m/s o)Car size : As per Standard p)Door width : 800/ 900/1000mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. " "u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment display v)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition " w)Special Features : Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way
"Supply, transportation, installation, testing and commissioning of 26 passenger, G+1, 1.0m/s Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent " "Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4.0mtrs e)Head room Height : 4.5mtrs f)Lintel Height (Required) : 2240mm from finished floor level +/- 10% g)Number of persons :26 P h)Rated Load : 1768 Kgs i)Number of Stops : 2 j)Number of Access sides : 1 k)Floor Designations : 3, 4 " "l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : ...... m/s o)Car size : As per Standard p)Door width : 800/ 900/1000mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. " u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment displayv)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition w)Special Features : Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way
Supply, Transportation, Installation, Testing and Commissioning of 14 HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping.
Supply, Transportation, Installation, Testing and Commissioning of 18 HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping.
Supply, Transportation, Installation, Testing and Commissioning of 20 HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping.
Supply, Transportation, Installation, Testing and Commissioning of 24HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping.
Supply of 4.6 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Supply of 5.5 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Supply of 6.6 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Supply of 8.0 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Supply of 13.0 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Supply of 16.0 TR minimum capacity and external static pressure VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-inCharge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge. Mid Static ductable Units (35 to 77 pascal external static pressure)
Lifting, shifting of unit to terrace, installation,testing & commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor - 14HP
Lifting, shifting of unit to terrace, installation,testing & commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor - 18HP
Lifting, shifting of unit to terrace, installation,testing & commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor - 20HP
Lifting, shifting of unit to terrace, installation,testing & commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor - 24 HP
Shifting of Unit to room , Installation,Testing & Commissioning of VRV / VRF indoor units (4wayCassette) of the following capacities required supports with necessary bolts, screws and nut etc complete . - Concealed type ducted type Indoor A.C units
Supply and fixing of fire retardant, non porous doble layer canvas of required size with GI frame, Gasket Nut bolts for air cooling plants / AHU's / FCU's etc., complete with marking connections etc., as required all as per approved by Engineer-In-Charge.
Supply, installation, testing and commisioning of 2 runs of following sizes of all refregerent liquid and gas piping using eddy current free hard copper pipes and fittings like elbows, couplers, T - joints, Brass fittings "U" loops, expantion loops, refnet joints etc, for VRV / VRF System. Insulation of pipes using 19mm for supply and 13mm returns thick elastometric closed cell nitrile rubber insulation materials having class "O" for fire properties structural clamps with hard PVC pipes sleevss under the clamp to protect insulation at supports tagging to enable tracing connectivity to respective units as per drawings to be generated by the agency submission of test reports in approved format forms a part of this item scope, making up of any leakages including supply, labour, consumables, refrigerant top up and incidental expenses. Makes : Mandev / or Equivalent as approved by the department a)12.7 X 28.6mm b)15.9 X 28.6mm c)19.1 X 34.9mm d)19.1 X 41.3mm e)22.2 X 41.3mm
Supply, transportation and installation of Hot- Dip GI floor mounting support stands for VRF outdoor units (positioned on Terrace or floor level), as per the standards with all necessary components, etc (Big Foot System)- 12 to 20HP
Supply, transportation and installation of Hot- Dip GI floor mounting support stands for VRF outdoor units (positioned on Terrace or floor level), as per the standards with all necessary components, etc (Big Foot System) - 22HP to 40HP
Pressure testing and commissioning of total VRV System with required Gas charging etc complete
Supply, transportation and installation of Copper piping outdoor insulation covered with fibre glass cloth, coated with UV paint
Supply, installtion, testing and commissioning of fire damper with fuse link UL-555 certified
Supply, installtion, testing and commissioning of Acoustic insullation 10 mm thick open cell nitrile rubber
Supply,installation,testing & commissioning of underdeck insulation 25mm thickness, density to be 32kg/cum the material should be Class O chemically cross linked closed cell polyethylene sheet covered with Alupet foil. Insulation to be provided complete for fittings, adhesive etc all as per specifications. The insulation shall be stuck directly to the roof using proper fixing.
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 50 mm Dia per running inch length
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 100 mm Dia per running inch length
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 150 mm Dia per running inch length
Supply and fixing of trap door for AHU / FCU in existing false ceiling duly made from 12 mm thick laminated board, hinged with wooden frame of cheed wood size 50mm x 80 mm, frame suspended with MS strip of 25 x 6 mm with anchor fastener minimum 8 supports from ceiling, hinges, locking arrangements etc., as required.
Supply, Installation, Testing and Commissioning of 20 Ltr/ Hr cooling capacity, 40 Ltr storage capacity self contained drinking water cooler as per IS : 1475 with hermetically sealed compressor, non CFC refrigerant suitable for operation on 230 V , 1 phase, 50 Hz AC supply, Fully stainless steel (SS 304) body (0.8 mm thick) and tank (0.5 mm thick), stainless steel water tray, minimum 2 numbers SS / Brass chrome plated faucetes and suitable drainage system complete in all respects including comprehensive maintenance of units during the defect liability period. Makes : Bluestar / Voltas
Supply, Factory fabrication, Transportation and errection of 18 Guage (1.2 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, Factory fabrication, Transportation and errection of 20 Guage (1.0 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, Factory fabrication, Transportation and errection of 22 Guage (0.8 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, Factory fabrication, Transportation and errection of 24 Guage ( 0.6 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, Factory fabrication, Transportation and errection of 18 Guage (1.2 mm) GI sheet Spiral / Round ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. 9 /12 mm thick self adhesive class 'O' nitrille rubber insulation shall be done inside the ducting. Makes : Tata / Zindal
Supply, Factory fabrication, Transportation and errection of 20 Guage (1.0 mm) GI sheet Spiral / Round ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. 9 /12 mm thick self adhesive class 'O' nitrille rubber insulation shall be done inside the ducting. Makes : Tata / Zindal
Supply, Factory fabrication, Transportation and errection of 22 Guage (0.8 mm) GI sheet Spiral / Round ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. 9 /12 mm thick self adhesive class 'O' nitrille rubber insulation shall be done inside the ducting. Makes : Tata / Zindal
Supply, Factory fabrication, Transportation and errection of 24 Guage ( 0.6 mm) GI sheet Spiral / Round ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. 9 /12 mm thick self adhesive class 'O' nitrille rubber insulation shall be done inside the ducting. Makes : Tata / Zindal
DUCT Insulation for INDOOR Supply and fixing of12 mm / 13 mm thickness XLPE foam with factory reinforced alluminium foil facing and Class O fire properties, at very low fire propagation < 5.5, and as per EN 13501-1 and E-84, the density of foam shoud not be less than 20 Kg to 30 Kg / M3 and the maximum thermal conductivity K should be 0.032 W / mK @ 23 degree C, the permiability resistance factor should not be less than 97000 as per EN 12086.
DUCT Insulation for INDOOR Supply and fixing of19 mm thickness XLPE foam with factory reinforced alluminium foil facing and Class O fire properties, at very low fire propagation < 5.5, and as per EN 13501-1 and E-84, the density of foam shoud not be less than 20 Kg to 30 Kg / M3 and the maximum thermal conductivity K should be 0.032 W / mK @ 23 degree C, the permiability resistance factor should not be less than 97000 as per EN 12086.
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, flanges etc as per specifications. The thickness of the damper frame shall be 16 guage and damper plate shall be 18 / 16 guage.
Supply and fixing of alluminium powder coated supply air grill with volume control dampers.
Supply and fixing of alluminium powder coated supply air grill without volume control dampers.(Architect shall approve the shade of epoxy power coating for the grills for supply and return air)
Supply and fixing of alluminium powder coated supply air diffuser with volume control dampers. (Architect shall approve the shade of epoxy power coating for the grills for supply and return air)
Supply and fixing of alluminium powder coated supply air diffuser without volume control dampers. (Architect shall approve the shade of epoxy power coating for the diffuser for supply and return air)
Supply and installation of Refnet Joint
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department -20 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department -25 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department -32 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department -40 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department -50 mm
Supply and laying of 1.5Sqmm 2 core PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.
Supply, Installation, Testing & Commissioning of the Air Curtain consists of 18 G CRC Steel make Blower, DIDW Forward Curve Centrifugal Fan & motor shall be suitable for 220 V, 50 Hz, Single Phase. - 1200mm Length Air Curtain
Supply, Installation, Testing & Commissioning of the Air Curtain consists of 18 G CRC Steel make Blower, DIDW Forward Curve Centrifugal Fan & motor shall be suitable for 220 V, 50 Hz, Single Phase. - 1500mm Length Air Curtain
Supply, installtion, testing and commissioning of Acoustic insullation 10 mm thick open cell nitrile rubber
Supply, Transportation, installation, testing andSupply, Transportation, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as required a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 LPM at 70 Mtr Head head conforming to IS 1520 b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar commissioning of electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as requireda) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 LPM at 70 Mtr Head head conforming to IS 1520b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.Makes of Motors: Siemens/ ABB/ Kirloskar
Supply, Transportation, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 LPM at 70 Mtr Head conforming to IS 1520 b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt
Supply, Transportation, installation ,testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 LPM at 70 Mtr Head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ Kirloskar
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 250 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 200 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 150 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 100 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 80 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 50 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 40 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 25 mm dia 'C' Class
Supply, installation, testing and commissioning of dual plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar - 150 mm nominal dia
Supply, installation, testing and commissioning of dual plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar - 100 mm nominal dia
Supply, installation, testing and commissioning of dual plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar - 80 mm nominal dia
Supply, installation, testing and commissioning of C.I. flanged " Y " type strainer with SS Mesh - 250 mm nominal dia
Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / Honeywell / Kartar
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 250 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 200 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 150 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 100 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 80 mm nominal dia
Supply, installation, testing and commissioning of Pressure Switch (PN 20 bar) of suitable range for pump sets with Ball valves, fittings like unions / colours / reducers etc., Make : Danfoss / Indfoss
Supply, installation, testing and commissioning of Pressure gauges ( PN 20 bar) of suitable range for pump sets with Ball valves, Fittings like unions / colours / reducers etc.(Glistering filled)
Supply and delivery of CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) including transportation etc., complete.Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve / Honeywell/ Kartar - 150mm nominal dia
Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specificationMakes of MCCBs : L&T / Siemens / Legrand / Schneider / ABB / Hager Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens INCOMING : 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A OUTGOING : ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) MAIN FIRE PUMP 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. JOCKEY PUMP 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller
Supply, Transportation and Installation of 300mm x 50mm x 2mm thick hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. (Makes: DEC/MNR/ H FAB or equivalent)
Supply, fabrication, welding, painting and installations including all necessary hardware as required
Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
Supply and fixing 4 Way Fire brigade connection cast iron body with 4 Nos Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar
Supply and fixing 2 Way Fire brigade connection cast iron body with 2 Nos Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes150 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes80 mm dia 'C' Class
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specifications. -150mm nominal dia
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specifications. -80mm nominal dia
Supply and fixing single headed internal / External hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Single headed Stainless Steel
Supply and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Gun metal+ SS couplings
Supply and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. 36.6 Mtr Long 20mm (Nominal internal)dia water hose Thermoplastic / Textilereinforced / Rubber braided /Polypropylene Type - 2 as per IS:12585Make: Eversafe / Newage / Newtech /SRI 20mm (Nominal internal) dia gun metal globe valve and nozzle.Make: Newage / Winco / Padmini / Newtech / Safex. Drum and brackets for fixing theequipments on wall Connections from riser with 25mm diastop valve (gun metal) & MS pipe.
Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.Make : Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar - Gun metal+ SS couplings
Supplyand fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Karta
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 150mm nominal dia
Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½”thickbothinsideand outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 150 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 100 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 80 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 65 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 50 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 40 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 32 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 25 mm dia 'C' Class
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 150 mm dia 'C' Class
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 100 mm dia 'C' Class
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 80 mm dia 'C' Class
Supply, installation, testing and commissioning of brass / gun metal chrome finished ball valve including cost of all materials, labour charges with required machinary etc., complete. of following sizes as required. Make: Newage / Winco / Padmini / Safex. - 50 mm dia
Supply, installation, testing and commissioning of conventional Sprinkler quartzoid bulb (Standard Response) type with 15mm screwed end connection of 68ºC temperature rating, K 80 and Orifice shall not be less than 6 mm. Sprinklers shall be UL listed / FM approved with Chrome finishing. Makes: SAFEX / HD / TYCO / VIKING / NEWAGE / Newtech / SHARP / Kartar
Supply, installation, testing and commissioning of flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately. Makes : System Sensor / Switzer
Supply and fixing Flow Switches in 150 mm dia MS pipe. Makes : System Sensor / Switzer
Supply, installation, testing and commissioning of approved make 25 mm dia. With automatic air release valve with unions etc. complete. (PN 16) ( Spring loaded type)
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Makes : HD / TYCO / NEWAGE or its equivalent make as desired by the department. - 80 mm dia
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Makes : HD / TYCO / NEWAGE or its equivalent make as desired by the department. - 100 mm dia
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Makes : HD / TYCO / NEWAGE or its equivalent make as desired by the department. - 150 mm dia
Supply, installation, testing & commissioning of stainless steel braided sprinkler flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 12 bar pressure rating and 1000-1200 mm long 25 mm dia with union / reducer collar, clamps etc., as required (Only for common area lobby) UL Listed Makes: SAFEX / HD / TYCO / VIKING / NEWAGE / SHARP / Kartar
Supply, installation, testing and commissioning of brass / gun metal chrome finished ball valve including cost of all materials, labour charges with required machinary etc., complete. of following sizes as required. Make: Newage / Winco / Padmini / Safex. - 50 mm dia
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm minimum overlap as per standard specifications - 100 mm nominal dia
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm minimum overlap as per standard specifications - 150 mm nominal dia
Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable 6 loop micro processor fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable 4 loop micro processor fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable 1 loop micro processor fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply and instllation of intallegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories. Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch/cooper / Appolo / Kartar
Supply and installation of response indicators for above false ceiling detectors. Makes: System Censor / Ravel / Vertex / Seaara
Supply and Installation of UL approved intellegent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch/cooper / Appolo / Kartar
Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / Kartar
Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply of 1.5 Sqmm 2 Core PVC / XLPE Insulated, Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Airson / Rhino
Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply, Installation, Testing and Commissioning of Amplifier 120 W for PA system suitable to operate on 230 V AC / 12 V DC supply etc., complete.(AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of 15 W Sound Column etc., complete with connection (AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of microphone etc., complete with connections. (AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of stand for microphone etc., complete with connections.
Supply, Installation, Testing and Commissioning of Table stand for microphone etc., complete with connections.
Supply, Installation, Testing and Commissioning of 2 core shielded microphone cable etc., complete with connections
Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial Makes : Safex / Kenex / Bharat / Reliance
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete Makes : Safex / Kenex / Bharat / Reliance
Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of Cease Fire or its equivalent make Model-1ES01
Electro- Mechanical Works: EXPANSION OF OTHER BUILDINGS
Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including masonary work and labour charges etc., complete. - Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete. - Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. - Makes : Sudhakar / VIP / Precision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. - Wire Makes: Finolex / RR kabel / Havells - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona
Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. - Wire Makes: Finolex / RR kabel / Havells - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona
Supply and fixing of ISI Marked 6A/ 10A 3 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Wiring with run of 3 of Supply of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B. - Wire Makes: Finolex / RR kabel / Havells - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona
Supply and fixing of ISI marked 16A/20A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. - Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona
Supply and Run of 3 of 2.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. - Wire Makes: Finolex / RR kabel / Havells
Supply, transportation and fixing of 18 W +/-10% (>= 1800 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. - LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply ,transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. - LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient as approved by the Department. - Makes : Atomberg (Efficio ) / Havells / Orient
Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete. - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply, Transportation and Fixing of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark with all labour charges etc., complete as directed at site. - Makes : Crompton / Almonard / Havells Turbo Force SP.
Supply and fixing of GI louver shutter including GI mesh to avoid birds entry with necessary materials suitable for Exhaust fan.
Supply and fixing 6 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 18No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - Isolator Makes : Legrand-DX3 / Schneider-Acti9 - MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply and fixing 4 Way SPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 2 pole Incomer of 32A DP Isolator and 2No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 40 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - Isolator Makes : Legrand-DX3 / Schneider-Acti9 - MCB Makes : Legrand-DX3 / Schneider-Acti9
"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete. - DB Makes :Legrand - MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2) - Makes : D Link / AMP / Molex / Legrand / Krone.
Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. - Makes : D Link / AMP / Molex / Legrand / Krone.
Supply, installation, testing and commissioning of IP Based digtal Telephone (EPABX) system --- --complied with following specifications: > IP @ Core, PCM/TDM, Non blocking, > Must Support PRI, E1, Analog Junctions > Must Support PC Console, > Must support Mobile SIP (Android and I.O.S) > Must support Voice Mail > Must support Card based GSM > Inbuilt Call Details Software with search engine software > 4 Analog Trunks > 6 Digital Extensions > 48 Analog Extensions > 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) > Expandable to 64 Analog Extensions or more Approved Brands: NEC/ Alcatel/ Karel/ Unify
Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete. - Makes : Finolex / Delton / Surabi / Polycab
Supply and run of 20 Pair telephone Copper wire., in the existing PVC pipe including all labour charges etc complete. - Makes : Finolex / Delton / Surabi / Polycab.
Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.
Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. - Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / TP Link / D link. / Legrand
Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply and fixing of 24 port patch panelswith IO Separate including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone. - Makes: Digisol / D Link / Legrand / TPLink
Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete. Makes : Vallrack (Legrand) / Netrack. - Makes : Vall rack (Legrand) / Netrack
Supply, Transportation and installation of 10.0KVA , 72VDC / 96V DC true on line UPS system IGB technology pure sine wave out put, with double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric / Emerson / Fuji Electric - Makes: APC / Numeric / Emerson / Fuji Electric
Supply and fixing of 12V 65 AH SMF battery including wire leads Makes : Quanta / Racket / Exide. - Makes : Quanta / Racket / Exide.
Supply and providing of UPS cum battery rack 5 to 10 batteries
Supply, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 50Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorization to be submittedfor future maintenance and guarantee)
Supply, Installation, Testing and Comissioning of 2MP Bullet camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 60Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorisation to be submitted for future maintenance and guarantee)
Supply and Installation Testing and commissioning of 64 Ch NVR with 8 SATA 10TB with following features: • Up to 64 channel Video Inputs • Up to 8 SATA interface • 200MBPS Video/Audio Incoming Bandwidth • 200MBPS Video/Audio Outgoing Bandwidth • Recording at up to 8 MP resolution • Supports live view, storage, and playback at up to 8 MP resolution • HDMI Video output up to 4K (3840 ×2160) resolution • H.264/MPEG4 video formats • Synchronous Playback upto 16-Ch. • Audio I/O • Alarms I/O Make: Honeywell/AXIS/MOBOTIX / Bosch
Supply and installation of Surveillance 8 TB Hard Disk Make : WD/ Seagate
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply, Installation, Testing and Commissioning of16 Port, 2 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ration 4000:1, Response time 8ms Approved Make : Samsung/ LG
Supply of unloaded 24 port patch panel with IO separate including all labour charges etc complete Makes : Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioningof 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox
Supply Installation of 7 feet length moulded patch cord including accessories and all labour charges etc complete Makes: Digisol / TP Link / D link. / Legrand
Supply and installation of IP 20, IK 08 17U floor 600mm Width x 1000mm Deep Floor mounting network rack with all accessories like front and rear doors, fans, castor wheels (2 with break and 2 without break), cable manager, cantilever shelf, horizontal and vertical wer distribution unit, monitor shelf, brush at cable entry and hardware packet, etc. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008.Netrack
Supply and installing HDMI cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site. -
Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.
Supply, Installation, Testing and commissioning of indoor type floor mounted metal clad VCB panel with 3 Nos VCBs, totally enclosed and fully inter locked horizantal draw out , horizantal isolated type breaker as per IS 13118 Specifications and as amended upto date and additional specifications, having capacities mentioned below, single break, trip free mechanism, motorised operated spring / manually charged and auto/manually closed breaker suitable for use on 11KV, 3 Phase, 50 HZ AC supply with short circuit fault level of 350 / 500 MVA, complete with self contained, fully inter locked rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630A capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring charging motor, 110V DC closing and tripping coil, safety shutter assembly, shunt trip coil and auxilary switch of 4 NO + 4 NC and equipped with the following switchgears and accessories including connections suitable for XLPE 11 KV cable, cable entry from bottom, end termination with heat shrinkable jointing material etc as required including construction of suitable CC works for VCB's etc complete. Makes:Kirloskar / Schneider / Siemens / ABB INCOMER - 1 No Vaccum circuit breaker electrical drawout type TP 11 KV 630 A not less than 16 KA rated short circuit rating current -1No POTENTIAL TRANSFORMER:1 No. 11000 / 110 Volts PT, Class 1 accuracy, 100 VA burden with HT/LT fuses. CURRENT TRANSFORMER: 3 Nos epoxy resin cast CTs of ratio 50 -- 300 A / 5A, 15VA burden and accuracy class 1.0 for metering and class 5P10 for protection METERING 1No Digital type Ammeter and selector switch of makes CONZERV/EQVT 1 No digital type Voltmeter with 0- 15KV range, slector switch for Voltmeter of makes CONZERV/EQVT 1No Digital Multifunction meter of makes CONZERV/EQVT Heater ON/OFF switch with space heater and thermostat, single phase switch with socket cubical lamp for panel illunmination with door limit switch ,MCB's for AC & DC control. LED indication lamps for breaker on, breaker off, spring charge indication, trip ciruit healthy with push button, Auto trip indication meter, Auxilary contact for service test position (4No + 4 NC) service and test positions and R/Y/B indication lamps. PROTECTION: 1 Nos. Microprocessor based IDMTL 3 over current and 1 earth fault relay with Over current, earth fault and short circuit protection. High speed tripping relay ANNUNCIATION: 8 Window annunciation panel with push buttons and hooters. POWER PACK: Supply, Installation, testing and commissioning of Power pack with 230V input and 110V DC continuous output suitable for closing / tripping / indication of 3 Nos VCBs with 2.5sqmm FRLS copper cable etc as required. OUTGOINGS - 2 Nos 630A VCBs draw out type TP 11 KV 630 A not less than 16 KA rated short circuit rating current. Each breaker shall consist the following. CURRENT TRANSFORMER: Epoxy resin cast CTs of ratio 50 -- 300 A / 5A, 15VA burden and accuracy class 1.0 for metering and class 5P10 for protection - 3 Nos Digital type Ammeter and selector switch - 1 No Makes : CONZERV / EQVT Digital Multifunction meter - 1 No Makes: CONZERV / EQVT PROTECTION : Microprocessor based IDMTL 3 over current and 1 earth fault relay with Over current, earth fault and short circuit protection - 1 No High speed tripping relay Auxiliary relay for bucholz A/T,OTI A/T, WTI A/T Heater ON/OFF switch with space heater and thermostat, single phase switch with socket cubical lamp for panel illunmination with door limit switch ,MCB's for AC & DC control. INDICATION LAMPS: LED indication lamps for breaker on, breaker off, spring charge indication, trip ciruit healthy with push button, Auto trip indication meter, Auxilary contact for service test position ( 4No+ 4 NC) service and test positions and R/Y/B indication lamps. ANNUNCIATION: 8 Window annunciation panel with push buttons and hooters. 1 No. rear entry cable box suitable to receive 11 KV, 1 run of 3CX 120 sqmm cable(XLPE) . 1 set of misc items like control fuses , control wiring , inter connections, nuts, bolts, bus trunking including all connected accessories etc. 1 Set of 11 KV, 630A, 350 / 500 MVA alluminium Bus Bar.
Supply, Transportation, Installation, Testing and Commissioning of 500KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level-I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider/SSE 1. Quantity : 1 2. Rated KVA : 500KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling :ONAN 8. Temp Rise : 40⁰C in oil, 45⁰C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 11KV/26A 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 415V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a.HV: HT terminal box as per the siteCondition. b. LV: Cable box suitable to receive 300 Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] as per IS 24. Total Losses at 100% Loading [Watts] [Max] as per IS 25.Percentage Impedance at 75 deg. C at 5 as per IS (As per Design ) 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable):Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type)
Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 599 KVA/ - - - - - KW out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned. A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable --- ----------- BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give - - - - -KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following.01. Voltmeter with selector switch.02. 4 Pole MCCB incomer of ----------A rating of Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make.11. Main supply air break contactor of LK make. 12. Audio Visual announciation .13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
Providing earth electrode of low carbon steel rod, UL listed of 25 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti corrosive, lead free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width : 320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity : 5000 Kgs including drilling of bore in any kind of soil.
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)
Supply and Run of 50.mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)
Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 40 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for [MAIN PANEL] Panel shall be manufacture only from CPRI approval Fabricators. 1000A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMING & BUS coupler Supply of 800A 4 Pole, 50kA Air Circuit Breaker electrically drawout Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault protection.- 2 Nos Makes : Siemens / L&T / Schneider Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 2 Nos MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL. Supply and erection of 0-1000A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. -2 Nos MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 2 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 2 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LED indication lamps on the existing panel board. - 6 Nos Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erection of LT current transformer with bar primary 800 / 5A ratio in the existing panel including connections etc., complete. - 6 Nos MAKE : KAPPA Supply of 630A 4 Pole, 50kA, electrically drawout Air Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection. -2Nos Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted.-3 Nos. Supply of 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted.-4 Nos. Makes : L&T / Schneider / Siemens / Legrand / Hager. Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4 Nos Makes : L&T / Schneider / Siemens / Legrand / Hager. Control wiring for ACBs, MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted 170 KVAR APFC panel made out of No.16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable spider links/bus bar links rating TPN Alluminium busbar ( with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below. This shall be got be manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges. 400A Alluminium Bus Bar with colour coded sleeves.(0.8A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 400A 4 Pole ACB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 1 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Metering Set: Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS / . Supply and erection of 0-400A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No MAKES : LK / C&S / SALZAR / /Siemens. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete.- 2Nos MAKES : LK / C&S / SALZAR /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3Nos MAKES : LK / C&S / SALZAR /Siemens. Supply and erection of LT current transformer with bar primary 400 / 5A ratio in the existing panel including connections etc., complete. - 3Nos MAKE :KAPPA or Equivalent 32A Bakelite fuse units with HRC fuse links (A.R.) - 3Nos Supply and fixing of 8 Stage APFC Relay with connections suitable CTs sensing from main bus bar of main panel. - 1No Makes : LK/ Siemens / EPCOS / Schneider / Elmeasure OUT GOING Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 7Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3/LK Supply and fixing of 50 KVAR rating capacitor duty contactor - 1Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 25 KVAR rating capacitor duty contactor - 3Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 20 KVAR rating capacitor duty contactor - 1Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 15 KVAR rating capacitor duty contactor - 1Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 5 KVAR rating capacitor duty contactor - 2Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Labour charges etc complete with connections for finished item of work. "Supply and fixing of 50 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos " Makes:LK (L&T)/ Siemens/Schneider/ Epcos. "Supply and fixing of 25 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 3Nos " Makes:LK (L&T)/ Siemens/Schneider/ Epcos. "Supply and fixing of 20 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos " Makes:LK (L&T)/ Siemens/Schneider/ Epcos. "Supply and fixing of 15 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1Nos " Makes:LK (L&T)/ Siemens/Schneider/ Epcos. "Supply and fixing of 5 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 2Nos " Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Control wiring,Labour charges for errection of switch gears,panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 40 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for [MAIN PANEL] Panel shall be manufacture only from CPRI approval Fabricators. 250A Alluminium Bus Bar with colour coded sleeves.(0.8A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35 / 36 kA with thermal magnetic release Panel Mounted - 1 No Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V OUT GOING FEEDERS Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 6 Nos Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V Supply of 50-63A 10KA TP MCB, C/D Curve ISI Mark.-9Nos Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.-4Nos Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH Metering : Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official). Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of LED indication lamps on the existing panel board. - 3 Nos b) Material Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA Control wiring for MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / Havells KEI / Finolex
Supply of 10.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 70 to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 240Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 95Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 25Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 300Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department e.
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 10Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply of 3 Core 11 KV 120 Sqmm HT XLPE (E) armoured Cable. As per IS specification confirming to IS 7098/II/85 with latest ammendments. Makes: Polycab / Havells / KEI
Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 120 Sqmm with necessary materials etc., complete. Makes : Transeal - Hong shang / Raychem / M Seal / Multy
Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 120 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs only. Makes : Transeal - Hong shang / Raychem / M Seal / Multy
Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Makes:DEC/MNR/Aparna/HFAB orequivalent
Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.
Supply of Rubber hand gloves suitable for 11 KV.
Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV.
Providing & Fixing of Shock instruction chart in English / Hindi / Telugu duly framed with front glass.
Providing & Fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.
Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.
Providing & Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.
First Aid box 18" x 12" x 8" containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required.
Supply of Kesslec Decorative Column shall meet the following details: 6.0 metre total height above the ground level made out of GI, tubular pole ‘T’ washed and primered. having three sections, bottom section made of corrugated type CI of minimum 1000mm (L) x180mm dia, the middle section of GI of minimum 1000mm (L) x 114mm dia and the top section of GI with minimum of 4000mm (L) x 89mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The CI embellishments shall be sealed to the column. The Pole Base plate should be with 400x400x16 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut- out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. GI ornamental banner Post mounted at a vertical height of 4.5 mtr, tightned with stainless steel grub screws to the pole for mounting luminaires. Complete pole & banner flag post shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint . The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The column to be painted in GREY finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: KESSLEC 6M BIRSTOL POLE GI PU PAINTED WITH BASE PLATE.
Supply of Kesslec Decorative bracket shall meet the following details: 1.0 metre total height above the top level made out of GI, tubular pole ‘T’ washed and primered' . The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The CI embellishments shall be sealed to the column. The bracket shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Hot dip galvanised ornamental DOH bracket of 1000mm length with a vertical height of 1000mm mounted at a height of 6.0mtr, tightned with stainless steel grub screws to the pole for mounting luminaires. Complete bracket shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total bracket thickness 165 micron). The bracket to be painted in GREY. The Bracket shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The bracket shall be fixed with focus lights 01 no each side to illuminate SUN symbol CAT REF: KESSLEC 1M DOH SUN DECO ARM (1000MM) GI PU PAINTED.
Decorative Element with mounting provision made of GI Lasercut structure indicating SHANK and GADA
Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete.
Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole MCB as incomer, 9 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch.
Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low volatage / High voltage trip and reset, operating voltage 380 - 450 V AC, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider / L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 8 KW Three phase load with necessary clamping arrangements. Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj
Supply of Kesslec 2 X 120W Classical Suspended LED lantern, BIS certified with a luminaire body made of spun aluminium, permanently sealed optical block (IP66) with heat sink and an anti UV PC protector (IK09) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by opening clamps for tool free access. Highly efficient temperature resistant lenses for asymmetric light distribution with desired optical option providing excellent photometry to optimally cater to street light application. Suitable for suspended mounting. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 5700K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The luminaire shall be in GREY colour and shall be supplied pre-cabled (0.3m) for easy installation CAT REF: KESSLEC HANOI 2X120W CW ASYM T3 LED
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system class SN-8 with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including rubber gasket, transportation to anywhere in Telangana, loading, unloading charges but excluding all taxes etc complete. Pipe OD 180mmm Pipe IS 150mm
Lowering , laying of Class SN 8 Double wall corrogated ( DWC) pipping system into ready made trenches , laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work.
I. STRUCTURAL FOUNDATION EARTHING Supply and installation of 10 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70µm for Type-B Earthing and should be tested for Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2. Makes : CAPE / OBO
Installation of Exothermic Welding - Including welding mould and other accessories for welding confirms the requirements of IEEE 837:2014 : T-Joint, X-Joint, L-Joint , Straight joint Makes : CAPE / OBO
Supply and Installation of Corrosion Proof Band to meet the requirements of IS / IEC 62305. Makes : CAPE / OBO
II STRUCTURAL DOWN CONDUCTOR Supply and installation of 10 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70µm as integrated down conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2.Makes : CAPE / OBO
Supply, installation and Testing of Bonding clamp/Rebar Hook for interconnecting 10mm - 18mm round conductor with reinforcement inside the concrete to meet the requirements of IS/IEC 62305 .( for Ring) Makes : CAPE / OBO
Supply and installation of stainless steel Straight Connector at every 4 Mtr of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2. Makes : CAPE / OBO
Supply and installation of stainless steel Earth stud of dimension 70 x 70 mm integrated inside concrete and should be tested for electrical resistivity, salt spray and huminity test & short circuit to meet the requirements of IS/IEC 62305 and IEC 62561-1&2.5. Makes : CAPE / OBO
Supply , installation and Testing of air termination rod of 2 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with stainless steel clamp and fixing accessories Test Parameter:Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm²Salt Spray Test-No sign of corrosionTested as per IEC 62561-1&2 Makes : CAPE / OBO
Supply, transportation, installation, testing and commissioning of 8 passenger, G+2, 1.0m/s Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4.0mtrs e)Head room Height : 4.5mtrs f)Lintel Height (Required) : 2240mm from finished floor level +/- 10% g)Number of persons : 8 P h)Rated Load : 544Kgs i)Number of Stops : 4 j)Number of Access sides : 1 k)Floor Designations : G, 1, 2, 3 l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : ...... m/s o)Car size : As per Standard p)Door width : 800/ 900/1000mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment displayv)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition w)Special Features : Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way
Supply, transportation, installation, testing and commissioning of 2000Kgs 2 stops 1.0m/s Goods Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4.0mtrs e)Head room Height : 4.5mtrs f)Lintel Height (Required) : 2240mm from finished floor level +/- 10% g)Number of persons : Goods h)Rated Load : 2000 Kgs i)Number of Stops : 2 j)Number of Access sides : 1 k)Floor Designations : G, 1 l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : ...... m/s o)Car size : As per Standard p)Door width : 800/ 900/1000mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment displayv)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition w)Special Features : Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way
Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years 1.5 TR 3 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Blue Star / Toshibha / Carrier / Hitachi / LG / Samsung / Lloyd or equivalent
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 50 mm Dia per running inch length
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 100 mm Dia per running inch length
Making hole in stone masonary / RCC Wall / RCC slab with core cutter for accommodating refrigerant pipe / drain pipe / MS pipe / cables etc., of 150 mm Dia per running inch length
Supply, Installation, Testing and Commissioning of Cooling capacity of 20 Ltr/ Hr , 40 Ltr storage capacity self contained drinking water cooler as per IS : 1475 with hermetically sealed compressor, non CFC refrigerant suitable for operation on 230 V , 1 phase, 50 Hz AC supply, Fully stainless steel (SS 304) body (0.8 mm thick) and tank (0.5 mm thick), stainless steel water tray, minimum 2 numbers SS / Brass chrome plated faucetes and suitable drainage system complete in all respects including comprehensive maintenance of units during the defect liability period. Makes : Bluestar / Voltas
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 20 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 25 mm
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department - 32 mm
Supply, Factory fabrication, Transportation and errection of 18 Guage (1.2 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, Factory fabrication, Transportation and errection of 20 Guage (1.0 mm) GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete.Makes : Tata / Zinda
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, flanges etc as per specifications. The thickness of the damper frame shall be 16 guage and damper plate shall be 18 / 16 guage.
DUCT Insulation for INDOOR Supply and fixing of 25 mm thickness XLPE foam with factory reinforced alluminium foil facing and Class O fire properties, at very low fire propagation < 5.5, and as per EN 13501-1 and E-84, the density of foam shoud not be less than 20 Kg to 30 Kg / M3 and the maximum thermal conductivity K should be 0.032 W / mK @ 23 degree C, the permiability resistance factor should not be less than 97000 as per EN 12086.
Supply and fixing of alluminium powder coated supply air grill without volume control dampers.(Architect shall approve the shade of epoxy power coating for the grills for supply and return air)
SISW Centrifugal fan for toilet exhaust with 50mm SPWG with weather proof casing as per specification with all accessories complete of the following Capacities.Moter efficence should be as per green building standards. - a) 800CFM
SISW Centrifugal fan for toilet exhaust with 50mm SPWG with weather proof casing as per specification with all accessories complete of the following Capacities.Moter efficence should be as per green building standards. - b)650 CFM
Supply, Installation, Testing & Commissioning of the Air Curtain consists of 18 G CRC Steel make Blower, DIDW Forward Curve Centrifugal Fan & motor shall be suitable for 220 V, 50 Hz, Single Phase. - 1200mm Length Air Curtain
Supplying and applying Acrylic Firestop Sealant in gaps around non-combustible penetrants like ducts or metal pipes passing through floor slab to provide a minimum 2 hours fire rating, UL 1479/ASTME 814 standards, as per DafStb guidelines with MAF, water and gas tight seal, airborne sound transmission reduction (STC of 50), sound insulation, mold resistance rating of 0 as determined by ASTM G21-96 and VOC content of approx. 75 g/l as per LEED 2009, in accordance with IEC 60068-2-57:1999- 11 (Environmental Testing) as per Part 2-57, UL listed & classified and with UL and FM approval logo on the packing
Supply, installtion, testing and commissioning of Acoustic insullation 10 mm thick open cell nitrile rubber
Supply, Transportation, installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 LPM, 45 Mtr Head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt / KSB / CRI Makes of Motors : Siemens/ ABB / Kirloskar / KSB / CRI
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 150 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 100 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 80 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 50 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 40 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 25 mm dia 'C' Class
Supply, installation, testing and commissioning of dual plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar - 100 mm nominal dia
Supply, installation, testing and commissioning of dual plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar - 80 mm nominal dia
Supply, installation, testing and commissioning of C.I. flanged " Y " type strainer with SS Mesh - 150 mm nominal dia
Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / Honeywell / Kartar
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 150 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 100 mm nominal dia
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar - 80 mm nominal dia
Supply, installation, testing and commissioning of Pressure Switch (PN 20 bar) of suitable range for pump sets with Ball valves, fittings like unions / colours / reducers etc., Make : Danfoss / Indfoss
Supply, installation, testing and commissioning of Pressure gauges ( PN 20 bar) of suitable range for pump sets with Ball valves, Fittings like unions / colours / reducers etc.(Glistering filled)
Supply, installation, testing and commissioning of DOL Starter consisting of following and made of 2mm thick CRCA sheet including painting with epoxy powder coating for Booster pump motor for Auto peration of the Pump. The starter box shall be provided SPP, MCB, Indication lamps,etc The box shall be suitable for terminating cable of suitable size.
Supply of 16.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / Ollvin
Supply of 1.5 Sqmm 3 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / Ollvin
Supply of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for Up to 16.0 Sq.mm 4 Core XLPE insulated armoured cable etc complete.Makes: SMI / Commet / Dowels.
Supply, fabrication, welding, painting and installations including all necessary hardware as required
Supply and fixing 2 Way Fire brigade connection cast iron body with 2 Nos Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 150 mm dia 'C' Class
Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes - 80 mm dia 'C' Class
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specifications. - 150mm nominal dia
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per standard specifications. - 80mm nominal dia
Supply and fixing single headed internal / External hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Single headed Stainless Steel
Supply and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar - Gun metal+ SS couplings
Supply and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. 36.6 Mtr Long 20mm (Nominal internal)dia water hose Thermoplastic / Textilereinforced / Rubber braided /Polypropylene Type - 2 as per IS:12585Make: Eversafe / Newage / Newtech /SRI 20mm (Nominal internal) dia gun metal globe valve and nozzle.Make: Newage / Winco / Padmini / Newtech / Safex. Drum and brackets for fixing theequipments on wall Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.Make : Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar - Gun metal+ SS couplings
Supplyand fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required.Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Karta
Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½”thickbothinsideand outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable 2 loop micro processor fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog addressable 1 loop micro processor fire control panel expandable by minimum 2 additional loops with minimum 640 character LCD display. Each loop of panel shall have maximum capacity 250 analogue addressable devices, and shall have 20% of spare capacity, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same.Makes: Siemens / Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply and instllation of intallegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories. Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch/cooper / Appolo / Kartar
Supply and installation of response indicators for above false ceiling detectors. Makes: System Censor / Ravel / Vertex / Seaara
Supply and Installation of UL approved intellegent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch/cooper / Appolo / Kartar
Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.Makes: Siemens / Morley IAS / Bosch / Ravel / Honeywell/cooper / Appolo / Kartar
Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply of 1.5 Sqmm 2 Core PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab
Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.Makes: Notifier / Edwards / Honeywell / Morley IAS / Bosch / Cooper / Appolo / Kartar
Supply, Installation, Testing and Commissioning of Amplifier 120 W for PA system suitable to operate on 230 V AC / 12 V DC supply etc., complete.(AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of 15 W Sound Column etc., complete with connection (AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of microphone etc., complete with connections. (AHUZA / OMEGA or equivalent)
Supply, Installation, Testing and Commissioning of 2 core shielded microphone cable etc., complete with connections
Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial Makes : Safex / Kenex / Bharat / Reliance
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete Makes : Safex / Kenex / Bharat / Reliance
Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of Cease Fire or its equivalent make Model-1ES01
Supply, lnstallation, TestinS and commissioning ot Hydro Pneumatic system with Variable Speed Drive, common inlet and out let manifolds, Non-return valves and isolating valves for each pump on the outlet side, pressure switches and one pressure transmitter conneded to the outlet manifold, an outlet pressure gauSe on the outlet manifold, pressure tanks, a control panel, control l{PC to eledrically switch on/off the pumps, Display & controller, all necessary interconnedions tor the above item5. This entire system should have compatibilityto integratewith BMs/lBMssystem Total Head:40 mtrs Each Pump capa€ity:19.5 m/hr No.of Pumps | 3 Nos (2w + 1s) 19,5 m3/hr each pump @40 mtrs Head Hydro MPC F 3xCR15-4,(2w + 1s), (4kw each Pump ,/ 5.5 HP), lnlet & Outlet:0N 100 Hydro Pneumatic Vertical Multistage inline Pressure Eoosting Skid Mounted Syrtem with SinSle VFD & 100 Ltrs Pressure Vessel, 10bar - 1 No
Supply of High pressure washer machine (power operated) suitable for the floor cleaning. Make: Bosch/Euraka Forbes
Total number of items ( 1058) One Thousand Fifty Eight only
Total ECV Rs.2,00,89,60,462 (Rupees Two Hundred crores Eighty Nine lakhs Sixty thousand Four hundred and Sixty Two only)
Item Detailed Specification Description
Dismantling works
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for RCC work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolishing and disposal of Unreinforced cement concrete upto 15 cm thicknes including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc.,complete and stacking them within 100 metre lead Not exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead Exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.xls
TENDER_DOCUMENT • 4.08 MB
JV Document - Bhadrachalam.docx
TENDER_DOCUMENT • 0.49 MB
Download all tender documents and submit your bid