Construction of Thozhi Working Womens Hostel building (50 beds G plus 2) with development works at Nallampalli in Dharmapuri District District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.5: Supply and Filling of 3 to 10mm HBSJ including conveyance

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3 : Supply and planting avenue trees

50.4 : Providing Tree guard

51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 50 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

Electrical arrangements 69 : 16 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112 : S & F of Exhaust Fan 300 mm dia

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

2.1.4 : Supplying and filling stone dust

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

11.5.1 : Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) with admixture a. In Ground floor

b. In First Floor

c. In Second Floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & Basement

18.1 : Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.For Vertical wall

f. Curved surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2100mm (Single Leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M20)

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.3: Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 2 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supplying and delivery of Three phase ELCB/RCCB

90.1: Providing additional strutting to centering of plain surface

98.5.4: TW Panelled door shutter with brass fittings (Double leaf) a. 1800mm x 2400mm.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Supplying and fixing of Stain Free Nano Polish colour Vitrified Tiles of size 60cmx60cmx8mm for flooring (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.4.2.1: Supply and fixing of superfine polished with machine cut edges (jet black) Granite slab of size 4'x2', 18 to 20mm thick for Kitchen arrangement (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

383.4: Providing double nosing to the edges of granite slab of 18 to 20 mm thick including labour, power consumption, tools and plants required, true to horizontal in all floors in the laboratory work table and as directed by the departmental officers.

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE-II: A1: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A2: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A3: Supply and fixing of UPVC Sliding Window (Two track)

A4: Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges, laying of 83mm thick paver block

A5: Supplying and fixing of PVC trims / Corners beeding suitable colour in toilet wall cladding in all floors including cost of all materials, Labour charges for fixing in position, cutting the required size wherever necessary, finishing etc., all complete and as directed by the departmental officers. (The Material quality & brand should be got approved from the Executive Engineer before use).

A6: Supply and fixing of APP membrance: Basic cleaning of the surfaces to remove dirt, dust, lose particles, providing and supplying a single coat of tar felt liquid membrane completing as per standard procedure and water proofing test etc., all complete and as directed by the departmental officers

A7: Providing Wallputty (One coat) for newly plastered surface

A8: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations.

A9: Supply and fixing of hydraulic door closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

A10: Supply & Fixing of Qute WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make.

A11: Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

A12: Supplying and fixing of CP Angle Cock Tap including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A13: Supplying and fixing of CP Shower Arm 9" long with overhead shower rose including cost of all materials and labour charges etc., all complete and as directed by the departmental officers.

A14: Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 50 Litres

A15: Supplying and Delivery of 2 T.R Split type AC unit 5 Star rated with all accessories etc., all complete and as directed by the departmental officers.

A16: Supplying and fixing of 5 KVA capacity Automatic Voltage Stablizer with time delay relay etc., all complete and as directed by the departmental officers.

A17: Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) etc.,all complete and as directed by the departmental officers.

A18: Supplying and fixing of MS stand for fixing Outdoor Unit etc., all complete and as directed by the departmental officers.

A19: Design, Supply, Delivery, Installation,Testing and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 8 Persons with 3 Floors / 4 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.

A20: Annual Maintance Charges for lift For First One Year (Free) For Second Year @ 5% of the Contract Value

A21: Vision Panel in Passenger Lift, Bed- Cum Passanger lift, Stretcher-cum-Passenger lift.

A22: Supply, installation, testing and commissioning of 25 KVA Diesel generator set complete with all accessories like engine, alternator, batteries with leads control panel, base frame, antivibration mounts, residential silencer,100 litres fuel tank, intake & exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hrs at factory (inclusive of consumable oil etc) necessary control wiring for battery charger etc., annunciation etc. as per specifications give below.with AMF Panel

A23: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A24: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A25: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A26: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A27: Providing and fixing M.S structural work fabricated from standard sections e.g. M.S. rounds, angles, channels, plates including cutting to size, welding, drilling with concrete drilling bits and fixing dash fasteners in RCC structural members as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps, etc.)

A28: Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)

A29: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the worksite in hard rock areas and developing the borewells etc., all complete and as directed by the departmental officers. a) Up to 150m below Ground Level

b) From 151m up to 180m

c) From 181m up to 210m

e) From 211m up to 240m

f) From 241m up to 270m

g) From 271m up to 300m

h) From 301m up to 330m

A30: Supplying, delivery and fixing of 160mm dia PVC casing pipe 6kg/cm2 of approved quality with ISI mark conforming to IS specifications as per IS 12818/1992 for borewell with average wall thickness of 6.10mm and with inner/outer threaded ends at standard length etc.,

A31: Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark conforming to IS specifications including cost of materials conveyance to site and labour charges for fixing in position etc., all complete.

A32: Supply and delivery of Nylon Rope for Bore-well including cost of materials and labour charges etc., complete as directed by the departmental officers.

A33: Supply and fixing of 65mm MS Bore Clamp set with ISI mark including labour charges for fixing etc., all complete as directed by the departmental officers.

A34: Supply and delivery of clear water vertical wet type 5 HP submersible pumpset without panel board suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. Duty - 50 LPM X 175M

A35: Supply and delivery of 3 HP Open well Submersible pump set without panel board conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. Duty - 50 LPM X 50M

A36: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) For 3 HP

A37: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) For 5 HP

A38: Labour charges for the erection of submersible pumpset in borewell / openwell including fixing and jointing submersible cable with proper clamps upto the starter. Upto 5 HP

A39: Supplying and delivery of following dia GI pipe "B" Class of approved quality with ISI mark etc., all complete. a) 25mm dia GI pipe "B" Class

b) 65mm dia GI pipe "B" Class

A40: Supply and delivery of 3 core 4 sqmm PVC insulated and sheathed flat type copper cable confirming to IS 694/1990 and as amended thereafter etc., and having ISI mark etc., all complete.

A41: Supply & laying of 32mm dia UPVC - Column pipe approved quality with ISI mark

A42: Supplying of following dia UPVC pipe including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the quality of upvc pipe should be got approved from the executive engineer before use). a) 32 mm dia UPVC pipe

b) 50 mm dia UPVC pipe

A43: Supplying and delivery of following dia GI, GM, CI, PVC, UPVC and MS specials of best and approved quality having ISI mark etc., all complete and as directed by the departmenal officers. (The qualiy of the GI, GM & UPVC specials should be got approved by the Executive Engineer before use) a) 32mm dia GM Gate valve

b) 32mm dia GM Non Return valve

c) 50mm dia GM Non Return valve

d) 50mm dia GI Union

e) 65mm dia GI Bend

f) 32mm dia GI Coupling

g) 65mm dia GI Coupling

h) 32mm dia GI Elbow

i) 65mm dia GI Elbow

j) 32mm dia GI Hex Nipple

k) 32mm dia UPVC Union

l) 50mm dia UPVC Union

m) 50mm dia UPVC Tee

n) 32mm dia UPVC Elbow

o) 50mm dia UPVC Elbow

p) 50mm dia UPVC Hex Nipple

q) 50mm dia UPVC Coupler

r) 50mm x 32mm dia UPVC reducer Tee

s) 32mm dia UPVC MTA

t) 50mm dia UPVC MTA

u) 32mm dia UPVC FTA

v) 50mm dia UPVC FTA

A44: Labour charges for the GI and UPVC pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade and aligement and refilling the trench with excavated earth etc., all complete and as directed by the departmental officers. a. 25mm Dia GI Pipe

b. 32mm Dia UPVC Pipe

c. 50mm Dia UPVC Pipe

A45: Supply and fixing of 3 in 1 CP wall Mixture

A46: Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing

A47: Run off mains with 4 wires of 6 Sqmm copper PVC insulated unsheathed single core 1.1KV cable wire contuinuous earth by means of 4 Sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable in fully concealed 19 mm / 20 mm dia rigid PVC conduit pipe heavy duty with ISI mark including cost of all materials, specials, etc., all complete.

A48: Run off mains with 4 wires of 10 Sqmm copper PVC insulated unsheathed single core 1.1KV cable wire contuinuous earth by means of 6 Sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable in fully concealed 19 mm / 20 mm dia rigid PVC conduit pipe heavy duty with ISI mark including cost of all materials, specials, etc., all complete.

A49: Supply and fixing of Single Pole 6A to 32A, 10KA Miniature circuit breakers etc., all complete and as directed by the departmental officers.

A50: 3 Nos.of 100 Amps - Fuse Unit

A51: Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

A52: Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed light Fitting including cost of fixing charges, tools, connetions and etc., completed as directed by the departmental officers.

A53: supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.

A54: Supplying and delivery of following PVC aluminium armoured LTUGcable (PVC aluminium armoured LTUG 1100v grade) with isi mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use]. a. 3.5 Core 50 Sqmm UG Cable

A55: Labour charges for laying of PVC aluminium armoured LTUG cable in a trench to a depth of 0.75m including earth work excavation, providing sand cushion, brick layer protection and refilling etc., all complete and as Directed by the departmental officers. Below Ground level

A56: Labour charges for laying of PVC aluminium armoured LTUG cable on post and wall to make good etc., all complete complying with relevant standard specifications and as directed by the departmental officers Above Ground level

A57: Supplying and delivery of following brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use) a. 3.5 Core 50 Sqmm UG Cable

A58: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure and with 1no. 40ADP MCB type as incoming and 8 nos. 6A, 10KA SP MCB as outgoing with busbar and double door arrangements in flush with wall and making good of the concealed portion with earth connection

A59: Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB Incomer) with double door (metal door) with 1 no. 160 A 4 P MCCB switch as incoming and 2 nos. 63A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End

A60: Supply and fixing CP two way bib cock with Health Faucet approved quality with ISI mark including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

Prasath Constructions (BID ID -1274649)