Certain repair/replacement of rewiring and fittings/fixture at MD/OTM Accn of Stn HQ,2 ASD Kasubegu,7 Arty Bde Camp,7 Inf Div Pro Unit, 161 (I) Fd Wksp, 997 AD Regt Wksp, 962 (I) TK TPTR PL,25 Mech Inf and 52 Armd under GE (East ) Ferozepur Cantt

Amount

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as directed and specified

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following description :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the independet board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No. 07 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14126 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14123 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39991 or equivalent make from Plaza/ INDOASIANas approved by GE

S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14119 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39994 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39800 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified. Make - Anchor, Model- Penta, Cat Part No-38660 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F LED 20 W LED 6000 K, indoor E-Lite LED PRIDE PLUS NEO with wide angle profile. High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete. Make- Havells, Model-E-Lite LED (LHEXACP7IN1W020) or Equivalent of Philips/C&S/Cromptonas approved by GE

S&F LED bulb of 10 watt all as specified and directed. Make- Havells, Model No-LED ADORE 10 W B22 CDL 3 STAR LAMP or Equivalent in PS.

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified. Make-Anchor, Model- Rose Mary Ding Dong, Cat Part No-8294 or equivalent make from Plaza/ INDOASIAN as approved by GE

S&F Recess and surface mounting LED flat panel 2'x2' made of CRCA sheet duly powder coated with high efficient LEDs & glare free full opal diffuser IP20 of 36 W. Make-Crompton, Model-LED TROFFER 36 W, Cat Part No. LCTLRNE-36-CDL or equivalent Havells/ Bajaj as approved by GE

S&F Bldg Security light fittings LED 25 watts, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or equivalent make from Havells/ Bajaj as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made, including thermal based release adjustable type 4 pole 63 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified. Make- INDOASIAN, Cat Part No-811888 or equivalent make from HPL/ Havells as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified. Make- INDOASIAN, Cat Part No-811807 or equivalent make from HPL/ Havells as approved by GE

S&F MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 16 KA including testing, complete all as specified and directed. Make- INDOASIAN, Cat Part No-830708 or equivalent make from HPL/ Havells as approved by GE

S&F MCB SPN, 40A-60A, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified. Make- HPL, Cat Part No- NTSPNB40 or equivalent make from INDOASIAN/ Havells as approved by GE

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified. Make- HPL, Cat Part No- NTSPB6-32 or equivalent make f rom INDOASIAN/ Havellsas approved by GE

S&F Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 6 sqmm drawn in 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as unit length).

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as unit length).

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm complete all as specifed and directed.

S&F Electronic ballast pre wired AC supply 230 V 50 Hz suitable for 36 watt tube light fittings ISI marked complete all as specified and directed. Make - Havells Cat Part No-LHGEAFBBDPA1036 or equivalent in Wipro/ CG/ Bajaj

S&F fluorescent tube rod 36/40 watt ISI mark. complete all as specified and directed. Make - Havells, Cat Part No-LHLFDLCENL70036 or equivalent from Wipro/ CG/ Bajaj as approved by GE

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 2 core, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE

Excavation in trenches in soft/ loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, compete all as specified and directed

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured and paid separately).

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/ walls, laid under floor/ road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed.

S&F on load side handle operated changeover switch 63 Amps, 4 pole, 415 Volts, in sheet metal enclosure, powder coated, weather proof conforming to IS : 1347 - (Part 3) 1993 complete all as specified and directed. Make- HPL, Cat Part No.COS4FP63 or equivalent make from Indoasian/ Standard as approved by GE.

Kissan contractor and engg works

Brar Enterprises

ABHISHEK AND COMPANY

Supreme Constructions

Vee Vee Enterprises

Dee Kay EnterPrises

M/S M H Builders

HAPPY ELECTRICALS