Repair to steel and wooden furniture of certain units at Ralawas area under AGE I Nagtalao

Amount

1. CHAIR EASY M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood front legs.

(b) 1st class hard wood rear legs.

(c ) 1st class hard wood Front/Rear/side rails in Chair bottom including making holes for canning as shown in drg.

(d) 1st class hard wood top/bottom/side rails in Chair back inclding making holes for canning asshown in drg.

(e) 1st class hard wood Arm rest

2. CHAIR WRITING M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Front legs

(b) 1st class hard wood Rear legs.

(c) 1st class hard wood Back Stiffener

(d) 1st class hard wood Bootom stiffener

(e) 1st class hard wood Seat front/rear/side rail

(f) 23mm di Hard rubber ring.

3. CHAIR DINING M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Front legs

(b) 1st class hard wood Rear legs.

(c) 1st class hard wood Back Stiffener

(d) 1st class hard wood Bootom stiffener

(e) 1st class hard wood Seat front/rear/side rail

(f) 23mm dia Hard rubber ring.

4. TEAPOY FD-382 & 278 M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated particle board with side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

(d) 1st class hard wood Stiffener

05 CHARPOY GI PIPE FD 220 M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) S&F, Mild steel, screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted washer and one hexagonal or square nut, exc 5cm but not exc. 10cm long and dia of neck 5 to 10mm.

(b) 12TH BWR Phenol bonded commercial ply of size 06 feet 08 inchs x 03 feet. (make-NATIONAL/CENTURY /GREEN PLY), including necessasry welding work if required.

6. TABLE DINING TO SEAT 06 PERS M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs

(b) 1st class hard wood Long rails

(c) 1st class hard wood 100 x 25 Stiffener

(d) 1st Class hard wood Short Rails

(e) Table Top of 19 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

7. TABLE DINING TO SEAT 04 PERS M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs

(b) 1st class hard wood Long rails

(c) 1st class hard wood 100 x 25 Stiffener

(d) 1st Class hard wood Short Rails

(e) Table Top of 19 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

8. CANNING M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 2 mm wide plastic cane best quality woven in Godrej pattern, 3.5mm wide cane for perimeter work complete.

(b) 4mm wide plastic cane best quality woven in Godrej pattern, 3.5mm wide cane for perimeter work for MS veranda chairs including painting and welding if required complete with 04 Nos PVC cap at bottom .

9. PEG TABLE M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated paticle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

10. TABLE CENTRE M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

11. CHAIR REVOLVING WITH ARMS M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) For Bottom as well as Back Seat (12mm TH hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all around ). (Foam make- SLEEP WELL,KURL ON & COOL FOAM)

12. M & L for polishing to the following furniture articles with a coat of French polish including preparation of wooden surfaces and complete all as specified and directed. (a) Chair Easy

(b) Chair writing

(c) Chair dining

(d) Tepoy

(e ) Table dining 6 Pers.

( f) Table dining 4 Pers.

( g) Peg table

( h) Centre table

13. Providing 01 (one) High skill Carpenter who can repair all type of furniture articles , alongwith tools and material like nails, screws, adhesive material of best quality, etc as required for minor repairs as on daily wages basis, requirments as directed by the AGE(I) Nagtalao.

14. Providing 01 (one) Carpenter's helper/labour as on daily wages basis, requirments as directed by the AGE(I) Nagtalao.

SK INDUSTRIES

M/S CHANDER SHEKHAR