Renovation of existing Swimming Pool Tarantal into Semi Olympic size complete work at Company premises MPPMCL Rampur Jabalpur

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge. 50 mm nominal outer dia.Pipes

RE-CIRCULATION PUMPS make of kirloskar Delivery pump with built-in strainer, ABS body, with complete in all respect to deliver the following duty parameters. DischargeperPump:25000LPH Nos.1 2.250kw/4hp-monophase-25m3/h

PRESSURE SAND FILTER Delivery of Anti Corrosive vertical High flow Top Mounted Pressure Sand Filter with diameter-1200mm, Material of construction fiber glass Bobbin Wound ,Flow/unit- 25m3/hour, Filterationrate-25m3/hour/m2, Back washtime-3to5minutes,Type off media-Silika Quartz Sand, Size of filtermedia 0.4 to 0.8 mm, Quantity off dia per unit 350Kgs,Type of under bed-Gravel, Size of ravel-1to2mm, Quanty of Gravel/unit- ,Type of Inlet distributor-Multi type made from; and polypropylene, Type of bottom collect Multi arm diffuser type made from un plastic PVC and polypropylene including all accessories ,fitting, fixing required for the work complete as per direction of engineer in charge.

Providing and fixing of Zoloto make 80 mm dia Cast Irion sluice valve PN-1 (Flanged) hand wheel operated non rising SS stem Bronze body seat ring flanged drilled conforming to IS-1538, shell test pressure 1.5pa (hyd.) seat test pressure 1.0Mpa Model No. 1079A and including new rubber packing nut bolts, washers, etc. all as per the direction of Engineer in charge.

Providing and Fixing of Zoloto make 40 mm dia Bronze Gate Valve Class-2 (Screwed) ISI Marked Art. No. 1035A

Providing and Fixing of Zoloto make 15 mm dia Bronze Gate Valve Class-2 (Screwed) ISI Marked Art. No. 1035A

Supply of Swimming Pool Lights (a)Underwater Light make of havells/ anchor 10W warm white LED Light12 V,10WTS.S.304 Body, IP68Warm White LED underwater light, The light shall be fitted/removed with the use of avoid coming loose like Push fit lights. The lights shall be CE compliant.

Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete.

Replacement of existing worn out wooden switch board and buttons of tube light, ceiling fan, lamp, 3pin by providing and fixing of new approved quality modular switch board such as 5Amps Switch, 27 Nos. 5Amps Socket 5 Nos. 15Amps Switch Socket 5 Nos. 12 Way PVC Board 5 Nos., PVC Round Seat 23 Nos, Sealing Raised 23 Nos. 1 Sq.mm Copper Wire 04 Roll. 1 ½ Sq.mm Copper Wire 2 Roll, 3/4" Accessories Nimoni, Screw 1 ½" & " Tube light. 18 Nos, 48" Ceiling Fans 5 nos. including replacement of old damaged existing cable by providing new copper Complete Job. of Manager Room, Filter Room, Open Area, (Baranda) gents Toilet and Ladies Toilet at Swimming Pool etc.

Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Providing & Fixing of havells/ anchor make M S Street Light Pole Single Arm 3" dia, Height 4 Meter with 60 Watt. LED Light at surrounding area of Swimming pool campus.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.

Demolishing brick work manually/ by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres leadas per direction of Engineer-in- Charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge,including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing, fabrication and fixing of new M.S doors shutter including angle iron frame in place of existing damaged mumty doors of double storey quarters. Item includes the door shutter having angle iron frame 35×35×5mm, M.S flat 30×5mm & 1mm thick M.S..sheets and door frame made of angle iron 40×40×5mm. The item also includes removal of existing damage frame & shutter carefully from wall, fixing of new frame & shutter, fixing of hold fast with cement concrete block, repairing of damaged edges of plaster etc. complete all as par the direction of engineer incharge.

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm easured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil.

Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement:

Centering and Shuttering in cluding strutting propping etc. and removal of form for.upto plinth Foundations,footings, bases for columns, plinth beams, curtain walls, columns below plinth.

Centering and shuttering in cluding strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for concrete upto plinth level.

Centering and shuttering in cluding strutting, propping etc. and removal of form for:Upto plinth level.

Centering and shuttering in cluding strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Post and Struts.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detalingIS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers. 3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)

Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Cement Mortar 1:6 (1 cement : 6 sand)

Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

15 mm cement plaster on the rough side of single or half brick wall of mix

20 mm cement plaster of mix : 1:6 (1 cement : 6 sand)

Mosaic tiles for swimming pool with adhesive grout 2

Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) includinggrouting the joints with white cement and matching pigments etc. complete. @ size 300x300 mm thick 9- 10 mm.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate )

Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Cuddpah stone Samples approved by Engineer-inCharge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K. value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) Engineer-InCharge. (Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 28 mm thick WPC (Wood polymer composite) ........... Index of 12 for 100 gms) Engineer-In-Charge.

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door / window / ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity Index of 12 for 100 gms) Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conformingto IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete Pre-laminated particle board with decorative lamination on both sides. as per architectural drawings and directions of engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required.

Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.

Providing & fixing of 10 Ltr. Capacity havells, Anchor, Bajaj, or equivalent make water Heater (geyser) Item including necessary required fittings and testing all complete as per the instruction of engineer in-charge.

Providing and fixing in position best Indian Health Faucet with 8mm dia 1.2 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware)

Providing and fixing i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer- in-Charge. Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings Internal work - Exposed on wall 15 mm nominal outer dia Pipes.

Providing and fixing i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer- in-Charge. Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings Internal work - Exposed on wall 20 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride CPVC) pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 50 mm nominal outer dia .Pipes.

Square SS Main drain grating/jail of size 12"X12" Outer Dia :- 305MMX305MM Inner Dia 235MMX235MM Thickness - 38 MM Brand – Austin, Emaux

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Eye Wall Nozzle floor inlet shall be made from unalterable ABS UV resistant with 2" side connection and shall be distributed evenly on the bottom floor of the pool. Brand – Austin, Emaux

Suction nozzle 2" Brand –Austin, Emaux

Repairs to plaster of thickness 12mm to 20mm i

n patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).

Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent fromweather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge

Supplying,erectingandtestingofapprovedmakeexhaustfanheavy duty with mounting frame, blades AC 230-250complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required. 300mm sweep RPM 900 / 1400

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore.

Providing and fixing CP brass soap dish of approved quality and make

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Soak pit square

Providing and fixing of approved brand of stainless steel shover with BRM including all fitting etc all as per the instruction of engineer in charge.

Meter

Supply of XLPE insulated power cable(conforming IS-7098 Part-I) 1100 Voltgrade, 1 core/2 core/3½core/4 core ISImarked with alu. stranded /solid conductor Unarmoured 2 core 6 sq. mm

Providing and fixing in position best quality C.P BIB Cock heavy duty of approved make complete as per direction of engineer in charge.

Wire and cable-make ,Havels Providing,fixing,testing and commission of wire size 1.5mm conduitng including necessary accessories for fixing as required at site.

Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)

Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.

STARTING BLOCK Pool Material- Stainless Steel and Fiberglass Height - 400 mm Width – 2510 mm Color – Blue, Make -Myrtha Racing pro ,Anti wave or as directed by engineer in charge

Four Inchi Racing Lane (Per Mtr.) Swimming Pool Lane Rope Size – 4” with Hook Lane Size – 25 Mtr Color –Blue/ Red/Yellow/White Rope Material – Stainless Steel

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge. 25 mm nominal outer dia.Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge. 40 mm nominal outer dia.Pipes

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) i

ncluding dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-In Charge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day. Hard rock (blasting prohibited)

Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7Total

Pointwiring(excludingmetallicswitchbox&sheet but including switches, sockets) for 3 earth continuity conductor of greencolour insidecasing&cappingwithrequired materials as per specification on same board.

SupplyingandfixingfloodlightwithhighpowerLEDof3to6WatteachassembledonsingleMCPCBadadditionaluniquepeanut lens on eachLED, systemlumens output with efficacy>120 lm/Watt 90/100Watt, color temp 3000-6500k as required.

SupplyingandfixingofapprovedmakemodulartypePVCboxminimumdepth 40mmandminimum thickness2mmwithmodularbaseandcoverplateincludingfixingonsurfaceetc.as required for: 6 Module PVC box

SupplyingandfixingofapprovedmakemodulartypePVCboxminimumdepth 40mmandminimum thickness2mmwithmodularbaseandcoverplateincludingfixingonsurfaceetc.as required for: 12 Module PVC box

Supply of approvedmake powder coated sheet steelencloser SPNMCBDB in clusiveofbusbar ,neutralbar,earthbar,connectioncopperwirenot lessthan16sq.mm 8 Way double door IP 43 protection

SupplyofISImarkedandacceptedstandardofminiaturecircuit breaker (MCB) of 'C' serieswith short circuit Single pole MCB SP 6Amp to 32Amp 10kA rating