DAILY REPAIR MAINTENANCE AND RSOLVING OF COMPLAINTS OF B/R RECEIVED ON ARMAAN WEB PORTAL AND COMPLAINT CELL OF AGE B/R-I AREA UNDER GE (NORTH) MEERUT CANTT

Amount

Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I )Only experienced 01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged.

Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. Note :- (I)Only experienced 01 Nos carpenter shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged.

Taking down steel window / ventilator of any description and of any type with or without guard bars and making good the disturbed portion complete all as specified and directed.

Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides, complete all as specified and directed.

S&F 35mm thick made of 2nd class hardwood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S Square tube complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F Powder coated anodised aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, sliding door bolt, tower bolt and anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with beading in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monkey prrofing framing etc inc at any height & inc necessary cutting and grinding complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed

Hacking out old broken glass any size thickness from steel/wooden frame including removing MS cleats punching or drilling out old glazing pins/springs etc complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed.

M&L for securing of old glass of any description in existing metal frame glazed with putty / beads including removing loose or decayed putty, beads painting / oiling one coat on rebates, groves reputting and painting / oiling puttied surface to match existing work complete all as specified and directed.

S&F in repair mild steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed.

S&F butt hinges 100mm long stainless steel complete all as specified and directed.

S&F in repairs 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete.

S&F in repairs 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedcomplete all as specified and directed

S&F in repairs 200mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repairs 20 mm CP Brass spindle suitable for MAP QTR for Bib cock, stop cock, pillar tap, angle wall wall mixer etc half or full turn of any description complete all as specified and directed.

S&F in repairs 15 mm CP Brass spindle suitable for MAP QTR for Bib cock, stop cock, pillar tap, angle wall wall mixer etc half or full turn of any description complete all as specified and directed.

S&F in repairs EWC seat cover with fittings complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe complete all as specified and directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and dismantling of old water tank complete all as specified and directed.

M&L for 01 mm thick MS plain sheet for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n. exc 750 litre complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitrious china squatting pan Orissa pattern size 580x440mm white with integal foot rest, including concrete bedding, P or S trap lime concrete bedding and all internal fitting, inlet, outlet pipe connections etc & making good floor complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed

S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.

S&F in repairs internal syphon kit of one piece EWC/WC complete all as specified and directed.

S&F in repairs for Vitreous china wash hand basin, white flat, size 550 x400 mm including brackets, waste coupling and waste pipe complete all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed

S&F GI snap grid of size 605X605mm for frame work for false ceiling including 1.5mm dia GI hangers complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.

S&F in repairs 5 mm thick, sandwich pattern, PVC Wall lining/wall panelling (sandwiched between the longitudinal grid in PVC Sheet) , consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm PVC fillets complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.

S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-Nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repairs Wall mixer 3-in-1 way telephpnic/Non telephonic long sank 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs sink mixer with swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs sink cock swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends as specified and directed.

S&F in repairs PVC connection hot water fibre reinforced 600mm long with brass check nuts and PVC washers at both ends (suitable for MAP qtrs) as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed

S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed

S&F in repairs CP WHB waste coupling of size 32mm complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400mm), as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) (Light shade) joint free area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

All as described Ser item No. 75 here-in-before but as in skirting laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick in CM 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick (square/ rectangular) (Light shade) joint free area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick laid over and including 20mm thick cement screed bed 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L for precast chequered cement concrete tiles of size 300x300x25mm thick, with grey cement and pigment, laid in floors with grey cement and joints filled with grey cement and pigment to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 10mm thick rendering in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:4 except bricks complete all as specified and directed. Note : Serviceable bricks obtained from ser item no 93 shall be reused.

Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick work other than fare surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on fare surfaces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of Premium acrylic oil bound distemper over and including 3mm thick wall care putty interior grade complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces and applying two coat of cement base paint over a coat of chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment walls and applying two coats of Acrylic exterior Emulsion paint (weather proof painting) using roller over and including a coat of wall care putty exterior grade wherever required at any height complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of premium acrylic oil bound distemper over and including a coat of wall care putty interior grade wherever required complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.

S&F in repairs of brass adjustable legs for wall mixer including washers and packing as per site requriment complete all as specified and directed.

Cleaning of water tanks of capacity not exceeding 1000 litre by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet incl ridges of any description as in roof and including removal from the site complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick(AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed.

S&F in repairs CP jet spray complete all as specified and directed.

S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed

S&F in repairs SS grating (with/ without hole) of size 125mm complete all as specified and directed.

S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.

S&F in repairs single towel rail 600 mm long complete all as specified and directed.

S&F in repairs stainless steel towel rack with rail and hooks(For MAP Qtrs) as per sample kept in AGE B/R-II office complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete.

S&F in repairs GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed.

VIRAT CONSTRUCTIONS (BID ID -3323173)

Punit Jain (BID ID -3318870)

A.V. ASSOCIATES (BID ID -3324947)