SPL REPAIR TO BLDG NO P-28 (SINGLE LIVING ACCN FOR 14 X JCOs), SPL REPAIRS TO BLDG NO P-71 OF 207 ARMY AVN SQN (UH) AND PROVISION OF 01 X SENTRY POST OF 44 RPA FLT/ 207 ARMY AT MANASBAL UNDER GE 970 EWS

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F for Pre- painted galvaLume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws upto the height of 10 m complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws upto the height of 10m complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 Upto the height of 10 mtrs complete all as specified.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm complete all as specified and directed.

S&F Providing and fixing Gypsum Board 10mm thick decorative type in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @2% by weight of cement and finished surface even and smooth without using extra cement including necessary scaffolding etc. (WPC paid seprately) complete all as specified and directed.

Supply only WPC

M & L 15mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M&L applying two coats of Distemper oil emulsion, white or tinted over 2 mm thick wall care putty on new wall surface including preparation of surface all complete and as specified.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick birla white putty including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of old decorated walls etc , properly making of v shape crakes and filling of all crakes with crake seal of walls complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed.

M&L for complete removal of existing treatment from Ceiling (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of 3mm thick wall care putty including preparation of surfaces complete all as specified and directed. Note: The time difference between one coat and two coat will be decided by Engineer-in-Charge.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame)

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified.

S&F 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&Fpowder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws anodised aluminium fittings such as peg stays 150mm long, hinge type B-21 100mm long, suitable handle complete all as specified

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F for Anodised aluminium grill rectangular section 4 x 6mm and mesh Size 50 x 50mm (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

S&F tinted glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement andcomplete all as specified and directed.

S&F in stainless steel Butt hinges 100mm size, medium weight complete all as specified and directed.

S&F in extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and directed.

S&F in Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed.

S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 20mm bore mild steel cromium plated curtain rods, suitable for door/windows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises as specified and directed.

M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

S&F light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed.

Description all as per ser item No 44 above but as in skirting over 10 mm thick screed in CM (1:4) as specified and directed.

S&F coloured Non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed.

S&F coloured glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:4) complete all as specified and directed.

M&L 20mm thick granite (of any type) tiles machine cut in skirting/dado over 15mm thick plater in CM (1:6) & jointed witht grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not oterwise specifically provided for complete all as specified and directed.

S&F for polythene film, black, 50 micron laid in floors complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with water proofing compound as per manufactures instruction on bottom up sunken portion with proper slope towards spout/spouts.complete all as specified and as directed.

M&L of water proofing treatment to sunken floor complete all as specified and as directed with following course of description below: (a) Applying one layer of cement slurry @ 0.688kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.253Kg/Sqm of make of approved in manufactures instruction and the allowed as cure for 4 Hours. (b) Second layer of cement slurry @0.240Kg/Sqm mixed with acrylic based polyer modified chemical composite compound coating @0.120Kg/Sqm and be allowed to a cure for 4 Hours. to following with max curing and testing for leak proof by ponding for 72 hours.

M&L for PCC 1:5:10 type E-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate complete all as specified and directed.

M&L for 25mm dia GI pipe as in spout to drain out if any leakage occures in the sunken portion complete all as specified and as directed

S&F in repair vitreous china wash down water closet (pedestal pattern) pan, white(excluding fixing bolts, flushing cistern and flush pipe) etc, complete all as specified and as directed.

S & F plastic seat cover white closed pattern with flat bottom and cover and mild CP aluminium hinging device all as specified and directed.

S & F in repair PVC 10 ltrs capacity low level flushing cistern complete set including flush pipe all as specified and directed.

S & F in repair vitreous china wash basin, white flat back size 550x 400 mm incl. brackets ,cutting for pinning in ends of brackets as fixed all as specified and directed.

S & F in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and as directed.

S & F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F A shower arm 15mm size, 195mm long with bend of 45 degreee with flange of PTMT any colour. (min. weight 40 gms) complete all as specified and directed.

S&F in repair brass chromium plated wall mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed.

S&F in repair brass chromium plated pillar mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed.

S&F MS Grating doom 100 mm dia (min. weight 25 gms) complete all as specified and directed.

S & F soap dish brass chromium plated fixed to wall with brass chormium plated screw and plastic plug etc. completed all as specified and directed.

S&F for Rotational moulded polyethylene 500Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position including dismantling all as specified and directed

S & F Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe & fixed. (min weight 15mm-142 gms) all as specified and directed.

S & F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool pre-formed mineral wool pre-formed `SNAP ON' pipe secions of density 144 Kg/cum conforming to IS 9842 on pipe of internal dia 20 mm complete all as specified and directed.

M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S & F in repair 15mm bib tap chromium plated with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

S & F in repair 15mm angle valve angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed.

S & F in repair 15mm 2 in one angle cock angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed.

S & F PVC connection pipe 15mm size with PTMT nuts of length 600mm all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

M & L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F 110 mm dia unplasticised PVC pipes of pressure rating 10kgf/sqcm fixed complete to walls, ceiling trenches etc, any type of pipe all as specified and directed.

Description all all as per ser item No 84 above but 75mm dia complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

Description all all as per ser item No 84 above but 75mm dia complete all as specified and directed.

S & F 110 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed.

S & F 75 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed.

S & F 110 mm dia PVC (SWR) bend any radius complete all as specified and directed.

Description all all as per ser item No 90 above but 75mm dia complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia provided with eccess door complete all as specified and directed.

Description all all as per ser item No 92 abovee but 75mm dia complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F 110 mm dia PVC (SWR) vent cowl all as specified and directed.

M&L Concrete bed to 100mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

M&L Concrete bed to 75mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L 75 mm thick Cement concrete type B2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M & L for Brickwork with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exec 6 M mean radius build in CM (1:6) complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F for steel windows or ventilators, fixed type with glazing bars complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed.

Demolition of Stone slabs and tile laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc all specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:6) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete

S & F in repair vitreous china Urinal, Half stall type,(580 x 380 x350 mm min) white(excluding flushing cistern and flush pipe) fixed all as specified and directed.

S & F in repairs Vitreous china squatting pan Orrisa pattern white/coloured of size 580x440mm with integral foot rest with P or S trap excluding flushing cistern and flush pipe complete all as specified and as directed.

S & F in repair PVC 10 ltrs capacity low level flushing cistern complete set including flush pipe all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep in soft and loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 for foundation filling & mass concrete complete all as specified and directed.

Use and waste for rough and finished to sides of concrete foundation, footings, base of column and plinth beams etc complete all as specified and as directed.

S&F of TMT bar 10 mm dia and over upto cut to length bent shape required inlcuding cranking , bending spirally for hooping for column, hooking ends and binding with and inlcuding mild steel wire not less than 0.9 mm dia, securing with clips quality conforming to fe 415.complete all as specified and as directed.

S&F of TMT bar 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders.complete all as specified and as directed.

M&L RCC nominal mix 1:2:4 type B1 for foundation , including rafts, footings, foundation beams, plinth beams, base for column , piles and mass concrete all as directed.

M&L RCC nominal mix 1:2:4 type B1 using 20mm graded aggregates for Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for moorum/red bazri filling floors and pavings in layers n.exc 15 cm thick spread and levelled complete all as per specified

M&L hardcore of gauge n exc 63mm deposited and spread and levelled in layer n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L PCC 100mm th type C2 1:3:6 (40mm graded stone aggregate ) as in sub base and finished the surface rough to receive base complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (20mm graded stone aggs) 40 mm thick as in floor complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

M&L removal of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point complete all as specified and directed.

M & L Preparation of newly plastered surface and apply two coat of cement base paint over a coat of Priming paint complete all as specified and directed.

M&L for roof trusses(framed) quality 410-W(Gde-E-250) quality A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets, framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc all complete all as specified and as directed.

Taking down and M&L for point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC Conduit, Concealed wiring in wall/ceiling with mild steel sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaust point/ bell point controlled by one switch 5Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) Note:- (a) wiring shall be done by using colour coding (b) Earth wire shall be of green colour

All as per the item no 3 above but 5 Amp socket outlet on independant board complete all as specified and directed.

All as item No 3 but for one socket outlet 15 Amps on Independent board using cable (2.5 Sqmm for Phase & neutral and 2.5 Sqmm for earthing) complete all as specified and directed.

S & F of Sheet metal enclosure single door for DBs when MCBs to be used SPN-4 way with 200 Amp rated bus bar complete all as specified and directed.

Supply & fixing of DBs double door SPN-8 way, 230 volts, AC supply, with 100 Amp rated Bus Bar, Earth Bar & Neutral Bar, IP 54, IS-8623, sheet metal enclosure complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of rating TPN 100 AMP complete all as specified and directed.

S&F for MCB SPN 63 Amps, 240 V complete all as specified and directed.

S&F for MCB SPN 32 Amps, 240 V complete all as specified and directed.

S&F for MCB SP 32 Amps 10 KA 240 V complete all as specified and directed.

S&F for switch piano flush type 5 Amps one way complete all as specified and directed.

S&F in replacement of switch socket combination outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type.

S&F in replacement of socket outlet 2 in 1, 3 pin, 5 A, 230V flush type all as specified and directed.

S&F switch socket combination outlet 5/15 Amps 5 in one flush type complete in independant board complete all as specified and directed.

S&F ceiling rose 3 terminal size 50x 65 mm surface type complete all as specified and directed.

M & L of Bell push, flush type, 5 amp, complete all as specified and directed.

M & L of Bell, AC, 230 volts, single pole, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as requiredcomplete all as specified and directed.

S&F of 1x20 Watts LED 6500K (4 ft) decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp complete all as specified and directed.

Taking down and M&L for sub main wiring complete, two run of 4 sqmm and one run of 1.5 sqmm with copper conductor, multi stranded, FRLSH, PVC insulated and sheathed, 1100 Volts grade, incl drawn through PVC suitable size conduit complete all as specified and directed.

Disconnecting carefully existing Geyser 15/25 Ltr any type and the same is servicing properly, replacement of defective spare parts including rubbing and two coat of existing colour paint and re-fixing properly (including screws, nut bolts and pvc connection) and testing completely all as specified and directed.

Disconnecting carefully existing ceiling fan 1200/1400 mm any type and the same is servicing properly, replacement of defective spare parts including rubbing and two coat of existing colour paint and re-fixing properly (including canopy, nut bolts) and testing completely all as specified and directed.

Taking down and Material and Labour for concealed point wiring using FRLSH PVC Insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm, drawn through medium grade rigid PVC conduits of 19/20 mm diameter. This includes all conduit fittings such as tees, bands, sockets and junction boxes, along with a 1.5 sq mm FRLSH PVC insulated, unsheathed copper conductor for Earth continuity. Provide necessary arrangements to accomodate Modular flush boxes, complete all work as specified and directed.

All as per the item no 4 above but 5 Amp socket outlet on independant board all complete all as specified and directed.

All as per the item No.4 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for Earthing) complete all as specified and directed.

Supply & fixing of MCB SP 6 to 32 Amperes, 240V, 10 kA, 'C' curve, AC supply all as specified and as directed.

S&F for switch Modular type single pole one way 5 amps 240 volts, with one module, complete all as specified and directed.

S&F for Modular switch socket combination 2 in 1, 5 pin, 6 amp flush type with 3 Module complete all as specified and directed.

S&F for Modular switch socket combination 2 in 1, 5 pin, 15 amp flush type with 3 Module complete all as specified and directed.

S&F for White cover plate with frame of 2 Module as specified and directed.

S&F for White cover plate with frame of 6 Module as specified and directed.

Supply and fix Metal Flush box for 2 Module as specified and directed.

Supply and fix Metal Flush box for 6 Module as specified and directed.

S&F ceiling rose 3 terminal size 50x 65 mm surface type complete all as specified and directed.

S&F of modular fan step regulator, 120W - 2 module, complete all as specified and directed.

S&F in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watts, 6500K, 220 V AC decorative type with driver holder & LED lamp including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down and M&L for sub main wiring complete, two run of 6 sqmm and one run of 1.5 sqmm with copper conductor, multi stranded, FRLSH, PVC insulated and sheathed, 1100 Volts grade, incl drawn through PVC suitable size conduit complete all as specified and directed.

S&F of Air Circulator fans 230 volts single phase oscillating of sweep size 300 mm suitable for wall mounting complete all as specified and directed.

S&F of Single Pole and Neutral, Single Door, 240 V, 4 way with 200 amps rated bus bar Sheet Metal Enclosure for MCBs complete all as specified and directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

Please Enable Macros to View BoQ information