Repair and repainting of Auditorium Annexure room dining area of ICAR-IVRI Bengaluru.

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 600x600 mm for lab floors Fixing glazed/ Ceramic/Vitrified floor tiles with cement based high polymer modified quick-settile adhesive (Water based) conforming to IS:15477,in average 3mm thickness. (Cera/Kajaria/Somany/Orient/Nitco)

Providing and fixing aluminum work for windows outer frame with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neopreneg asket etc.Aluminium sections shallbe smooth,rustfree,straight,mitred and joint edmechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,all complete as per architectural drawings and the directions of Engineer-incharge.(Glazing,panelinganddashfastenerstobepaidfor

For shutters of windows including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasketrequired(Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminum window shutters and ventilators etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item): With float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)plain glass(Modiguard/SaintGobain)

Supplying fixing standard starlock for sliding window shutters as per Approved sample

Supplying and fixing with chosen it SS mesh as per approved sample for Aluminum shutters

Providing and fixing 09 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Gradel Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Steelwork in built up tubular(round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer ,etc. complete. Hot finished welded type tubes, purl in for sides

PaintingwithsyntheticenamelpaintofapprovedbrandandmanufactureofrequiredcolourtogiveanevenshadeTwoormorecoatsonnewworkoveranundercoatofsuitableshadewithordinarypaintofapprovedbrandandmanufacture. (Asian Tractor / Jonson Nicholson / Berger)

Providing and fixing pre-coated galvanized steel sheet chajja profiles of approved shape and size for windows roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy both side of the sheet and polyester top coat 15-18 microns using self drilling/ self-tapping screws complete tiled shaped as per approved sample For chajjas

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- 1:3:6(1Cement: 3coarses and(zone-Ill) derived from natural sources :6graded ston eaggre gate 20mm nominal size derived from natural sources)

Providing Cement plaster 1:3(1cement: 3coarse sand) finished with afloating Coat of neat cement. 12 mm cement plaster

Banking excavated earth in layers not exceeding 20cm in depth,breaking clods, watering, wooden or steel rammers, below floors etc.,lead up to 50m and lift up to1.5m all kinds of soil

Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels Granite stone slab of all colour and texture except black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing edge molding to 18mm thick marbles to necounters, Vanities etc., including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing ceramic wash basin of suitable size to fix inside the granite opening with waste coupler and waste pipe as per approved sample (Jaquar , Cera , Hindware , Parry ware ) including necessary fittings

Supplying and fixing wash basin taps as per approved sample(Jaquar , Cera , Hindware , Parry ware ) including necessary fittings as required at site complete

SupplyingandlayingfixingPVCpipes(4kg/cm2-ISI-Finolex/Supreme/Kisan/Prince/Canara/Ashirvad)withallrequiredcollars,bends,elbows,tees,sockets,bushwithpvcsolventetc.includingprovidingPVCclampsateveryonemeter,completeasrequiredat site for 50 mm dia pipe

Providing and fixing Chlorinated Poly vinyl Chloride(CPVC)pipes,having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling&testing of joints complete as perdirection of Engineer in Charge 15mm nominal dia Pipes

Providing and fixing mirror of superior glass (of approved quality) and of required shape and sizewith plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular shape as per approved sample

Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats(Asian Tractor / Jonson Nicholson / Berger)

Hacking / making rough the existing mosaic floor to lay vitrified floor tiles

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Providing and fixing sliding shutters cup board (MDF) with moisture resistant, BWP, HDF, HMR etc for cupboards below washbasin/sink area as per approved sample colour (century, wooden street) and thickness 12mm with two track frames of suitable material heavy gauge as per approved sample with necessary fittings all complete.

GST at the rate 18%

M/s. Miraan Enterprises (BID ID -3253114)

K MURALI (BID ID -3250591)

K ANJANEYAREDDY (BID ID -3249482)