NIT-28 of 20-21 CERTAIN REPAIRS TO TILING, BRICK WORK, JOINERY, PLUMBING WORK, CEILING, ROOFING, PANELLING AND MISC REPAIRS AT KAPRA, BHALRA, GHATI MORH AREA AT BHALRA MIL STN UNDER GE (I) 873 EWS

Amount

B/R Portion

Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, but except brick, i.e. using serviceable bricks obtained from demolition, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position complete and removing rubbish from the site, complete all as specified and directed.

Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed.

TMT bars 8mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of debries outside cantt area, complete all as specified and as directed.

Vitrified coloured tiles, light shadeof size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Non-skid coloured glazed ceramic jointless tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 350m x 250mm x 7mm / 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

16mm to 18mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white ement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down with shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and as directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 Nos of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge complete all as specified and directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of pressed steel door frames and in bed block for holdfast and similar works etc. complete all as specified and directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

Powder coated aluminium door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos on each shutter, hinges, anodised aluminium snap beading screws etc., minimum thickness of powder coating 50 microns, complete all as specified, complete all as specified & directed.

Aluminium powder coated, three track sliding window outer frame top & sides (section No-21138) of size 62mm x 29.5mm x 1.5mm weighing 0.807 Kg/m, frame bottom (Section No 21139) of size 62mm x 29.5mm x 1.5mm weighing 0.902 Kg/m, shutter plain vertical (Section No 21093) of size 39mm x 20mm x 2.0mm weighing 0.634 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40mm x 20mm x 1.5mm weighing 0.484 Kg/m, with powder coating of minimum thickness 50 micron with one or more rebates, sliding type with out sash bars, 4mm thickness plain glass, rubber packing, snap beading screws, with 5mm thick Tinded glass (AIS) etc. complete all as specified & directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Hasp and staple, size 100 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified and as directed.

150mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repairs in floor, complete all as specified and as directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified & directed.

Brass mortice lock, vertical type, 100mm size, 4 levers, fixed in repairs in aluminium frame complete all as specified and as directed

Fancy type curtain rod 20 mm dia powder coated fixed to brackets complete all as specified and directed.

Mild Steel Brackets powder coated for holding drapery rods fixed with screws to walls all as specified and directed.

Fancy dome type corner ends fixed to drapery rods 20mm dia all as specified and directed.

Venetian roller blinds, manually operated with single curtain designer cloth, opaque type, complete all as specified and as directed. Make : Vistalevelor / Mac

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

4mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Mild steel steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Preparation of roof surfcaes by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and roughening old concrete roof surfaces and applying cement slurry @ 3.0 Kg of cement per Sqm and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 10mm thick screed bed with cement mortar 1:3 over concrete surface. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd course of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.

Mild steel rolled work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410-W (Gde-E-250) quality-B, fixed in repairs, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

Refixing Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, complete, all as specified and as directed.

0.80mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Refixing Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Self tapping screws 75mm long for fixing to old existing Pre-painted galvalume aluminium zinc coated sheets as in roof covering / cladding to walls, in buildings upto double storey height including all necessary scaffolding and safety arrangement complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

Arm strong mineral suspended ceiling system [FINE FISSURED (TEGULAR) EDGE TILES WITH ARMSTRONG XL 24MM EXPOSED GRID] (regular) edge tiles with armstrong. The grid should be of "Armstrong" make with 24mm wide T-section flanges colour white having rotary stitching on all T section i.e. the main runner with C3 coupling, 1200mm and 600mm cross Tees with hardened XL2 clip and web height of 32, 27 and 25mm with a load carrying capacity of 7.05 Kgs/m. The T section shall have a galvanizing of 120 Grams/Sqm and shall pass the 72 hrs Salt test complete all as specified.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shape and design, fixed in repairs to walls or ceilings all as per the manufacturer's instructions, complete all as specified and as directed.

6mm thick Plywood, 5 nos of ply, BWR grade type BB, as in wall / ceiling, flat or sloping, fixed with nails to timble framework, complete all as specified and directed.

Dismantling unframed timber scantlings and in any position complete all as specified and as directed.

2nd class hardwood in scantling clean sawn timber framed and fixed complete all as specified and directed.

2nd class hardwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 03 Sqcm but not exceeding 06 Sqcm complete all as specified and as directed.

Dismantling water tanks exceeding 250 litres capacity but not exceeding 500 litres, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Brass CP wall mixer, fancy type, with connector for hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, fixed to 15mm dia pipe, complete all as specified and as directed. Make : Jaquar Cat Part No CON-271KN or equivalent in Ess Ess / Koheler / Marc

Angle stop cock with wall flange, cast copper alloy, fancy type, screwed down high pressure with capstan head fly handle, screwed with ends for iron pipe or unions of 15mm, fixed in repair, complete all as specified and directed. Make : JAQUAR Cat Part No CON-059KN or equivalent in Ess Ess / Koheler / Marc

Chromium plated health faucet including CP flexible pipe for EWC all as specified and and as directed. Make : Jaquar Cat Part No ALD-CHR-593N or equivalent in Ess Ess / Koheler / Marc

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

05 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) size 625mm x 365mm x 700mm with flushing cistern, snow white colour, including ‘P’ trap and soft close seat cover, complete all as specified and directed. Make : Cera 'Cruse' - WC Cat Part No S1031134, Cistern Cat Part No S1060106, Seat Cover Cat part No B1520110 or equivalent in Hindware / Parryware / Neycer

Vitreous china table bottom wash hand basin 560 x 470mm, snow white colour, including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete, fixed in repair, all as specified and as directed. Make : Cera Cat Part No 'OVAL' S2030104 or equivalent in Hindware / Parryware / Neycer

PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Bottle trap of PTMT having minimum water supply seal of 25mmm, suitable for discharge pipe of 32mm bore (minimum weight 260 grams), fixed in repairs, complete all as specified and directed.

Toilet Paper Holder, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1151N or equivalent in Hindware / Parryware / Neycer

Soap dish, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1131N or equivalent in Hindware / Parryware / Neycer

Towel Rack with lower hanger, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No AHS-1581H or equivalent in Hindware / Parryware / Neycer

Corner Glass Shelf assembly (with bracket), fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1173 or equivalent in Hindware / Parryware / Neycer

Glass Shelf 600mm long, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1171N or equivalent in Hindware / Parryware / Neycer

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

VEER TRADERS

M S BANSI LAL CONSTRUCTION CO

M/S KOTWAL CONSTRUCTIONS

M/s Ashok Kumar

RAMESHWAR ENGINEERS AND BUILDERS

BALVINDER SINGH AND SONS

JK BUILDERS AND DEVELOPERS

RAJINDRA ENGINEERS & CONTRACTORS

Bidder Name

m/s vaid contractor and builders

RAMESHWAR ENGINEERS AND BUILDERS

M S BANSI LAL CONSTRUCTION CO

VEER TRADERS

RAJINDRA ENGINEERS & CONTRACTORS

BALVINDER SINGH AND SONS

JK BUILDERS AND DEVELOPERS

M/s Ashok Kumar

M/S KOTWAL CONSTRUCTIONS