REPAIRS TO FENCING CHAIN LINK CONNECTING PATH STEEL GATES AND SIDE PILLARS AT MADGAON UNDER GE PANAJI

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good complete all as specified and directed.

Demolition of brick work or laterite stone masonry built in cement mortar including precast concrete articles complete all as specified and directed.

Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed

Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in CM 1:6 by using serviceable stone obtained from serial item No 4 here- in- before i.e. except stone complete all as specified and directed

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, of squared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specified and directed

Material and labour for rendering 15mm thick cement plaster in cement mortar 1:6 on stone masonry surfaces other than fair face, finished even and fair without using extra cement complete all as specified and as directed

Material and labour for preparing newly plastered surfaces of wall and applying two coats of colour wash complete all as specified and directed

Material and labour for cement concrete 1:3:6 (type C2) using 40 mm graded stone aggregate as in walls, pillars and posts, etc including caps and bases complete all as specified and directed

Material and labour for cement concrete 1:4:8 (type D2) using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed

Supply and Fix MS work as in fencing posts angle iron/Tee section, drilled and countersunk for balusters running bars, including embedding in concrete and securing etc, post and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets, (for securing wire mesh etc,) holding pr riveting etc, and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling barbed wire fencing/ wire mesh complete all as specified and directed

Fixing only chain link fencing including line wire, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed

Supply only Chain link fencing of 10 gauge(3mm exceeding pvc coating) wire with pvc coating of 75x 75mm complete all as specified and directed

Supply and Fix galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbed at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc complete all as specified and directed Note:each line of wire to be measured separately

Supply and Fix MS screwed bolt (machine made) hexagonal/square headset one end and screwed the others, for screwed or both ends, each screwed and ends to be fitted with washers and one hexagonal/square nut, not exceeding 10 cm long complete all as specified and directed

Material and labour for two coat synthetic enamel paint over a coat of red oxide primer on steel new surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed

Material and labour for two coat cement base paint including preparation of old surface complete all as specified and directed

Material and labour for cement concrete 1:2:4 (type B1) using 20mm graded stone aggregate in copings, bed plates and kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Material and labour for mild steel bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for stiffening of the fencing complete all as specified and directed

Material and labour for two coat synthetic enamel paint over a coat of red oxide primer on old steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed

Material and labour for Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Material and labour for cement concrete100mm thick PCC1:4:8 (type D2) using 40mm graded stone aggregates as in sub base of path complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Supply and Fix glazed ceramic colour tiles on vertical surface of size 450x350x7 mm thick surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed

SAI ENGINEERS & CONTRACTORS

Manik Constructions