4700WorkTender000019

Scraping of old painted surface including disposal of all scraped material upto a distance of 30 mtr for 20 mm thick bituminious surface as directed by engineer in charge

Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge within adistance of 60 metre.

12 mm thick Plaster with cement & course Sand of 1.25 FM Mortar in 1:4

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats over plastered surface to prepare the surface even and smooth complete.

Finishing wall with weather coat paint (Asian or Berger Brand) on new surface with two coat to give an even shade including supply of all material, labour & tools and plants etc. requiredfor proper completion of the work.

Apply two coat superior synthetic enamal paint including primer coat on steel surface

First class B/w in 1:4 Cement C'sand mortor in Sub Structure including supply of all meterial labour t&P etc required for proper completion of work

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I.

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work

Supply & Fixing Garden Bench (Victoria Type Bench) •Cast Iron having back height of 720 mm and seating height of 390 mm. •M.S Tube of 65mm X 25mm rectangular tube having length of 1520 mm in 10 Nos. •For seating purpose with extra support 25mm X 5mm M.S Flat for extra stability all sharp and rough edge of Bench are to be grinded with grinder and all fill up with m seal where its required necessary thus bench is having the provision of hole past system (for grouting). •Bench in complete with a coating of 1st class red oxide and with two coats of synthetic enamel of 1st class quality paint in green colour. •Finally bench is assembled with nuts and bolts. •Gross weight of each bench is 70 kg.