Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹1.3 Cr 28 1 1 ONKARMAL JETIA ROAD HOWRAH WEST BENGAL PIN 711103 | ₹1.3 Cr |
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
4 Nov 2025, 11:00 amClosed
Renovation of Bhubaneswar Guest house, Paradip Port Authority
NBCC/SBG/ODISHA/NIT/25-26/047
NBCC/SBG/ODISHA/NIT/25-26/047
Open Tender-Domestic
Civil Works - Buildings
Khordha, Odisha
₹11,800
₹1.8 L
21 Jul 2026
28 Oct 2025
4 Nov 2025
4 Nov 2025
12 Dec 2025
Sr. Sl. No. Rate Rate Amount Amount
Civil Works 0.00 0.00
1 1 Dismantling & removing doors, windows, & ventilator 0.00 0.00
Dismantling & removing doors, windows, & ventilator including removal of
1 frame, hinges, fastening & stacking the same for reuse and rmoving the debris 0.00 0.00
with in 50. m Lead etc complete.
2 Ground Floor sqm 46.35 537.79 24,924.85 0.00
3 First Floor sqm 8.10 537.79 4,356.08 0.00
4 2 Dismantling brick or stone masonry 0.00 0.00
Dismantling brick or stone masonry in lime or cement mortar under 3m.height
5 including stacking the useful materials for reuse and removing the debris within 0.00 0.00
50m. Lead
6 Ground Floor Cum 272.49 1901.85 5,18,235.27 0.00
7 First Floor Cum 66.42 2013.72 1,33,751.61 0.00
9 3 Dismanteling & removing old tile flooring 0.00 0.00
Dismanteling & removing old tile flooring including removing the base course
10 and stacking the useful materials for reuse and removing the debris with in 50. m 0.00 0.00
11 Ground Floor sqm 239.39 170.21 40,747.26 0.00
12 First Floor sqm 64.68 170.21 11,009.37 0.00
13 4 Dismanteling & removing old tile cladding from walls(dado) 0.00 0.00
Dismanteling & removing old tile cladding from walls(dado) including raking out
14 joints 12 mm deep stacking the useful materials for reuse and removing the debris 0.00 0.00
with in 50. m Lead.
15 Ground Floor sqm 48.17 74.89 3,607.21 0.00
16 First Floor sqm 12.05 74.89 902.76 0.00
17 5 Removing old lime or cement plaster from walls 0.00 0.00
Removing old lime or cement plaster from walls including raking out joints 12
mm deep & removing the debris with in 50. m Lead.
19 Ground Floor sqm 1565.14 68.09 1,06,566.56 0.00
20 First Floor sqm 428.18 68.09 29,153.69 0.00
21 6 Labour for scrapping out of old paint from the wall 0.00 0.00
Labour for scrapping out of old paint from the wall & ceiling surface including
cost of all labour,T&P required for the work etc complete
23 Ground Floor sqm 1301.81 6.04 7,865.02 0.00
24 First Floor sqm 428.18 8.27 3,541.82 0.00
25 7 Dismanteling aluminium/ Gypsum partition 0.00 0.00
Dismanteling aluminium/ Gypsum partition, door, window,fixed glazing and false
ceilling including disposal of unserviceable material and stacking of serviceable
material with in 50 m lead as directed by engineer - in charge.
27 Ground Floor Sqm 162.54 36.08 5,863.76 0.00
28 First Floor Sqm 20.58 36.08 742.44 0.00
29 8 Garbage Disposal 0.00 0.00
The work shall include collection, loading, transportation, and disposal of
construction debris, waste materials, vegetation, and other garbage generated
from the site to an approved municipal dumping ground or designated disposal
location as directed by the Engineer-in-Charge.
31 9 Site Clearance 0.00 0.00
Cleaning & grubbing road land including uprooting rankvegetation, grass ,bushes,
shurbes,sapling and trees girth upto 300mm ,removal of stumps of trees cut earier
and disposal of unsevicable materials and stacking of servicable materials to be
used or auctioned up to lead of 1000 meters including removal and disposal of
top organic soil not exceeding 150mm thickness.
33 Ground Floor Sqm 84.98 9.95 845.33 0.00
34 Electrical Panel Room Sqm 65.36 9.95 650.16 0.00
35 10 Earthwork in Excavation 0.00 0.00
Earth work in excavation of foundation in HARD soil within 50m lead and 1.5m
lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And
laying in layers not exceeding 0.3m in depth and as per specification complete.
37 Ground Floor Cum 13.50 326.73 4,410.86 0.00
38 Electrical Panel Room Cum 18.60 326.73 6,077.18 0.00
40 Ground Floor Cum 4.50 1794.89 8,076.99 0.00
41 Electrical Panel Room Cum 4.50 1794.89 8,076.99 0.00
42 11 Sand Filling 0.00 0.00
Filling in foundation, trenches and plinth with river sand, well watered and
compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper
43 gradient including cost of all materials, conveyance, all taxes and royalties, 0.00 0.00
loading and unloading, including cost of all labour, sundries, T & P etc. All
complete as per directions of the Engineer -in-charge.
44 Ground Floor Cum 6.89 628.65 4,328.22 0.00
45 Electrical Panel Room Cum 12.49 628.65 7,853.03 0.00
46 12 Back Filling 0.00 0.00
Filling available excavated earth (excluding rock) in trenches plinth sides of
foundation etc. in layers not exceeding 20 cm in depth , consolidating each
47 deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt 0.00 0.00
etc. including cost of all labour, sundries T & P etc complete in all respect as per
the direction of Engineer-In-Charge.
48 Ground Floor Cum 13.50 181.52 2,450.51 0.00
49 Electrical Panel Room Cum 18.60 181.52 3,376.26 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size
clean hard black crusher broken granite stone metal of approved quality and from
approved quarry including hoisting, lowering and laying concrete in layers not
exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc.
51 complete including cost, conveyance, royalties of all materials with all labour and 0.00 0.00
T&P required for the work etc. complete in all respect and as per the direction of
the Engineer-in-charge.
52 Ground Floor Cum 9.98 7149.70 71,368.33 0.00
53 Electrical Panel Room Cum 3.46 7149.70 24,737.97 0.00
54 14 Anti-termite Treatment 0.00 0.00
Providing & applying of pre constructional anti-termite treatment Confirming to
IS 6313 (Part-II) and creating chemical barrier under and around the column pits,
wall trenches, basement excavation top surface of plinth filling, junction of wall
and floors along with external perimeters of building, expansion joints,
surrounding the pipes and conducts etc. at the rate at 7 ,5 liter per sqm on vertical
55 surface and 5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid 0.00 0.00
30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials, labour,conveyance,
T&P , all taxes and hire charges of machinaries as per direction of Engineer-
incharge. (Make :- HI-Solution or Smart Care Pest Control or Bharat Pest
Eradicators)
56 Ground Floor Sqm 13.30 123.36 0.00 1,640.65
57 Electrical Panel Room Sqm 13.30 123.36 0.00 1,640.65
58 15 FLY ASH BRICK WORK 0.00 0.00
Fly Ash brick masonry in cement mortar (1:6) in F&P using Fly Ash bricks of 25
Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2% including splays cutting circular
moulding chamfering and corbelling and similar such type of works with all
59 necessary projections watering and curing after immersing the bricks in water at 0.00 0.00
least for six hours before use including cost, conveyance, royalties and taxes of all
materials with all labour,labour cess and T & P required for the work complete in
all respect as per direction of Engineer-in-Charge.
60 Ground Floor Cum 36.23 7666.48 2,77,787.37 0.00
61 Electrical Panel Room Cum 6.89 7666.48 52,783.74 0.00
R.C.C. work M-25 grade with 20mm and down grade black hard granite
(crusher broken) stone chips including centering and shuttering work.
64 Foundation and plinth Cum 3.90 9362.17 36,512.45 0.00
65 Column Cum 0.42 9362.17 3,932.11 0.00
66 Plinth beam Cum 2.37 10389.17 24,661.29 0.00
67 Ground Floor 0.00 0.00
68 Column Cum 1.15 20292.40 23,336.26 0.00
69 Lintel Cum 4.03 18404.83 74,097.83 0.00
70 Chhaja Cum 8.16 1569.14 12,804.19 0.00
71 Roof Beam Cum 4.52 20292.40 91,726.73 0.00
72 Roof Slab Cum 11.18 17914.80 2,00,252.70 0.00
73 First Floor 0.00 0.00
74 Column Cum 1.15 22710.72 26,117.32 0.00
75 Lintel Cum 4.03 20445.54 82,313.75 0.00
76 Chhaja Cum 6.12 2024.54 12,390.17 0.00
77 Roof Beam Cum 4.52 22710.72 1,02,658.12 0.00
78 Roof Slab Cum 11.18 19857.57 2,21,969.17 0.00
79 Electrical Panel Room 0.00 0.00
80 Foundation and plinth Cum 3.90 9362.17 36,512.45 0.00
81 Column Cum 0.42 9362.17 3,932.11 0.00
82 Plinth beam Cum 2.25 10389.17 23,375.63 0.00
83 Ground Floor 0.00 0.00
84 Column Cum 1.63 20292.40 33,076.61 0.00
85 Lintel Cum 0.77 18404.83 14,079.69 0.00
86 Chhaja Cum 1.02 1569.14 1,600.52 0.00
87 Roof Beam Cum 2.25 20292.40 45,657.90 0.00
88 Roof Slab Cum 3.22 17914.80 57,685.64 0.00
90 17 Reinforcement 0.00 0.00
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of
primary steel producers (grade Fe-500D) etc. including bending, binding,
welding and jointing if necessary and tying the grills and placing in position as
required for R.C.C. Work and for providing fan hooks as required, hoisting,
lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and
91 binding wires of 18 to 20 gauge and labour required for the work for bending, 0.00 0.00
binding and tying the grills in all floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete
as per specification & direction of Engineer-in-charge.
92 Foundation and plinth Qntl 9.06 10378.93 94,033.07 0.00
93 Ground Floor Qntl 23.97 10378.93 2,48,773.06 0.00
94 First Floor Qntl 23.87 10418.39 2,48,656.19 0.00
95 Electrical Panel Room 0.00 0.00
96 Foundation and plinth Qntl 8.86 10378.93 91,957.28 0.00
97 Ground Floor Qntl 10.99 10378.93 1,14,028.07 0.00
98 18 Super Structure Brick Work 0.00 0.00
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash
bricks of 25 Cm. x 12 Cm. x 8 Cm size having a crushing strength of not less
than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting
circular moulding chamfering and corbelling and similar such type of works with
99 all necessary projections watering and curing after immersing the bricks in water 0.00 0.00
at least for six hours before use including cost, conveyance, royalties and taxes of
all materials with all labour,labour cess and T & P required for the work complete
in all respect as per direction of Engineer-in-Charge.
100 Ground Floor Cum 44.30 7711.72 3,41,660.26 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
101 First Floor Cum 44.30 7756.97 3,43,664.62 0.00
102 Electrical Panel Room Cum 10.80 7711.72 83,286.63 0.00
103 19 16 mm Plastering 0.00 0.00
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with
screened and washed sharp sand for mortar and finished smooth to the rough
surface of walls in all heights after racking out joints including watering and
104 curing, rounding of corners, providing grooves where ever necessary with cost, 0.00 0.00
conveyance, royalties of all materials with cost of all labour,labour cess, T&P,
and scaffolding required for the work etc. complete in all respect as directed by
the Engineer in charge.
105 Ground Floor sqm 310.69 333.24 1,03,535.43 0.00
106 First Floor sqm 173.00 347.00 60,030.76 0.00
107 Electrical Panel Room sqm 87.29 333.24 29,087.68 0.00
108 20 12 mm Plastering 0.00 0.00
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with
screened and washed sharp sand for mortar and finished smooth to the rough
surface of walls in all heights after racking out joints including watering and
109 curing, rounding of corners, providing grooves where ever necessary with cost, 0.00 0.00
conveyance, royalties of all materials with cost of all labour,labour cess, T&P,
and scaffolding required for the work etc. complete in all respect as directed by
the Engineer in charge.
Ground Floor
111 First Floor sqm 309.12 237.65 73,462.99 0.00
112 Electrical Panel Room sqm 77.02 232.14 17,878.95 0.00
113 21 6 mm Plastering 0.00 0.00
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with
screened and washed sharp sand for mortar and finished smooth to R.C.C. work
after closed deep chipping & slurry treatment including watering and curing,
114 rounding of corners, providing grooves where ever necessary with cost, 0.00 0.00
conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding
required for the work etc. complete in all respect as directed by the Engineer in
charge.
115 Ground Floor sqm 374.17 261.16 97,716.69 0.00
116 First Floor sqm 256.82 267.61 68,728.03 0.00
117 Electrical Panel Room sqm 27.05 261.16 7,063.79 0.00
118 22 Vitrified Floor Tiles 0.00 0.00
Providing full body antiskid vitrified tile flooring using vitrified tiles having
thickness of min 10mm conforming to IS 13755 of 1200x600 (shade to be
decided as per Ama Hospital scheme) (homogeneous) of premium quality in
floors, treads on steps and landings on 20mm thick bed of cement mortar of mix
(1:4) laid in proper slope and gradient with screened and washed sharp sand for
mortar and fixing with neat white cement slurry,grouting the joints with neat
119 white cement slurry mixed with required quantities of pigments of approved make 0.00 0.00
to match the shades of the vitrified tile if required , watering and curing for 21
days, including cost, conveyance, loading, unloading, royalties and taxes of all
materials, cost of all labour,Labour cess , sundries, T&P required for the work,
complete in all respect as per specification and direction of Engineer-in-charge.
120 Ground Floor sqm 98.24 1846.07 0.00 1,81,354.68
121 First Floor sqm 20.58 1861.97 0.00 38,319.33
122 Electrical Panel Room sqm 21.00 1846.07 0.00 38,767.57
123 23 Vitrified Floor Skirting 0.00 0.00
Providing, fitting, fixing GVT -Glacier White vitrified tiles of premium grade
having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm
as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm
124 thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to 0.00 0.00
match the shades of the tiles including rubbing and polishing etc. complete with
cost, conveyance, royalties of all materials all labour,labour cess complete in all
respects.
125 Ground Floor sqm 27.90 1698.21 0.00 47,384.61
126 First Floor sqm 16.13 1722.13 0.00 27,774.47
127 24 Ceramic Floor Tiles 0.00 0.00
Supplying of Antiskid Ceramic Floor Tiles in flooring using special plain / printed
series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to
8 mm & size 600mm x 600 mm, confirming to I.S 13755 of approved quality and
shade as directed by Engineer-in-charge in floors, treads on steps and landings
on 20 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and
128 gradient with screened & washed sharp river sand for mortar and fixing with neat 0.00 0.00
white cement slurry,grouting the joints with neat white cement slurry mixed with
required quantities of pigments (Tiles are to be immersed in the water for
required time before use) of approved make to match the shades of the Ceramic
Floor Tiles
129 Ground Floor sqm 47.12 2587.57 0.00 1,21,936.87
130 First Floor sqm 21.92 2603.47 0.00 57,078.46
131 25 Ceramic Floor Skirting 0.00 0.00
Supplying of 300 x 600 special plain/printed series Ceramic wall tiles of premium
grade having thickness 6.5mm to 6.7mm confirming to IS 13753 as directed by
Engineer-in-charge in dados on 12mm thick cement plaster (1:3) jointed with neat
132 cement slurry mixed with pigment to match the shades of the tiles including 0.00 0.00
rubbing and polishing etc. complete with cost, conveyance, royalties of all
materials all labour,labour cess complete in all respects.
133 Ground Floor sqm 171.11 2352.27 0.00 4,02,492.39
134 First Floor sqm 5.92 2368.17 0.00 14,024.28
135 26 Glass balcony 0.00 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
Supplying & fixing of 10MM clear toughned glass at balcony area consist of S.S.
304 grade 40mm X 40mm X1.5mm thick vertical baluster of GTS make Modular
Glass Railing with One no. of 50 mm dia 1.5mm thick SS 304 grade handrail on
the top of the railing.This rate is including of all materials,10 mm thk clear
toughned glass of St. Gobain/Eqvt. make and labour charges
137 27 UPVC DOOR 0.00 0.00
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)
Casenent Door-60-Series duly manufactured using UPVC reinforced profiles of
60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm casement
Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of
mounting single glazing system, structurally reinforced with hot dip galvanised up
to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through
fusion welding the door sash shall be fitted with 12mm thick WPC Board of
Greenply make duly fixed with EPDM weathering seal resistant accessories like
138 clipping locking system made of aluminium 1 No. per set of sashes and th esystem 0.00 0.00
isto be installed at the site using anchor fasteners, silicon rubber sealant,easy
glazing/deglazing at site etc. including cost and conveyance of all material,
accessories, labour charges, materials and product conforming to ASTM D 638-
14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the
Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)
139 Ground Floor sqm 28.56 11554.09 0.00 3,29,984.75
140 Electrical Panel Room sqm 2.10 11554.09 0.00 24,263.58
141 28 UPVC VENTILATOR 0.00 0.00
Providing of Upvc Ventilator duly made of Fenstech upvc FRAME section 60mm
x 60mm & Inbuild gasket (Minium Size 2' X2')
143 29 WPC Frame 0.00 0.00
Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite
)- Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer
Composite (Single Extruded Process ) material comparising of virgin PVC
polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural
Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives
fabricated with meter Joints after applying PVC solvent Cement & screwed with
full body treaded star headed screws having minimum frame density of 780 kg/
cbm & an ISO 9001 - 2015 Certified Company, having good screw holding
144 capacity ( Screw Withdrawal strength of ( Min. 990 N ),Minimum Compressive Rmt 39.60 1709.34 0.00 67,689.71
Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread
of flame of class A category with property of being termite / borer proof , water /
Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners /
Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed
by the Engineer-In-Charge. Material test certificate and authentication should be
compulsory provided by the manufacturing company.
145 30 WPC Shutter 0.00 0.00
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of
25mm thickcompacted with wood grain finish structural foam panel of 29mm
thickness and a density of 20kg/cu.mtr shall be used as core material for fitting
the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A
structural adhesive compatible with (EPS) foam shall be used for bending the
core material, The material and process for manufacturing the door shutters shall
146 conform to RV-TIFAC composites Design Centre's standards and specifications sqm 12.60 5667.35 0.00 71,408.63
and the door shutters Conforming to relevant I.S.specification. The finish of door
shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak
wood or any other colour using high quality pigments. Three heavy whight mild
steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of
shutter.
147 31 Aluminum Sliding Window 0.00 0.00
Providing and fixing System Aluminum works for Sliding doors and windows
with 50mm visible aluminium section width in the centre mullion. The extruded
aluminium sections should be made from Grade 6063-T5 & Anodized with
Texguard coating,silicon coated to suit marine atmosphere. All profiles should be
None insulated Profiles.Corner connection will be Butt joint with Screw using
Nano gaskets for seali8ng. All other major Accessories should also be made by
the same manufacture. All slider doors & windows will be centre locking.
Integrated Anti- lift in sl8ider panel. EPDM gaskets should be used in slider
windows & doors in all meeting points instead of Brush Pile. The outer frame
Depth will be 72mm. All materials which are used should be corriosion-resistant
so that they are good functioning in different environments and that there are no
negative influences either on the aluminium or on the surface treatment. The
148 system should allow the application of glazing or panels with thickness up to 0.00 0.00
8mm. The external per8imeter of aluminium sections should be Anodized with
Texguard coating, the system should qualify Airtightness ASTM
E283:10.7m3/h.m2 at 75Pa ofpessure, water tightness ASTM E300:240Pa, Wind
load resistance ASTM E330:2000Pa. System should have a 10 -year warranty on
propoties,functionality and design within restrictions defined by technical
specifications of anodizing & 1- year warranty on wearing parts only applies to
normal and realistically foreseeable use. All Slider doors & windows will be
centre locking. Glass to be used is 6MM TOUGHENED ET 435. (2 track
2panel/2track 2 panel with integral coupling/3 track 6 panel)
149 Ground Floor sqm 39.96 37540.99 0.00 15,00,138.04
150 First Floor sqm 15.12 37540.99 0.00 5,67,619.80
151 Electrical Panel Room sqm 1.62 37540.99 0.00 60,816.41
152 32 False Ceiling 0.00 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
M/F Suspended Plain Ceiling includes Perimeter Channel is fixed along the
perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40)
impact anchor, at 600mm centres. Ceiling Angle is suspended by fixing it to the
soffit cleat. Soffit Cleat and Rawl Plug- Ø8x45mm creating 1220mm x 1220mm
grid. Intermediate channel is fixed to the Ceiling Angle with M6 x 12mm Hex
Bolt & Hex Nut arrangement or with 2 Nos of Ø4.2x13 metal to metal screw The
Ceiling Section is then fixed to the Intermediate Channel with the help of
Connecting Clip and in direction perpendicular to the Intermediate channel at
457mm c/c. Single layer of 12.5mm Glasroc-H (Conforms to EN 15283-1 and
153 Types GM - H1) is then screw fixed to ceiling section with 25mm drywall screws 0.00 0.00
at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally
square and tapered edges of the boards are to be jointed and finished so as to
have a flush look which includes filling and finishing with Pro-Fill Jointing
compound (Conforms to ASTM C475), JointPaper tape. Serrated section has
effective thickness of 2T ( 2xdepth), better load carrying capacity, enhanced
screw retention, Improved acoustic performance & fire resistance as compared to
plain steel section.
154 Ground Floor sqm 102.92 2011.90 0.00 2,07,056.70
155 First Floor sqm 60.76 2011.90 0.00 1,22,243.04
156 33 Wallpaper 0.00 0.00
M/F Suspended Plain Ceiling includes Perimeter Channel is fixed along the
perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40)
impact anchor, at 600mm centres. Ceiling Angle is suspended by fixing it to the
soffit cleat. Soffit Cleat and Rawl Plug- Ø8x45mm creating 1220mm x 1220mm
grid. Intermediate channel is fixed to the Ceiling Angle with M6 x 12mm Hex
Bolt & Hex Nut arrangement or with 2 Nos of Ø4.2x13 metal to metal screw The
Ceiling Section is then fixed to the Intermediate Channel with the help of
Connecting Clip and in direction perpendicular to the Intermediate channel at
457mm c/c. Single layer of 12.5mm Glasroc-H (Conforms to EN 15283-1 and
157 Types GM - H1) is then screw fixed to ceiling section with 25mm drywall screws 0.00 0.00
at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally
square and tapered edges of the boards are to be jointed and finished so as to
have a flush look which includes filling and finishing with Pro-Fill Jointing
compound (Conforms to ASTM C475), JointPaper tape. Serrated section has
effective thickness of 2T ( 2xdepth), better load carrying capacity, enhanced
screw retention, Improved acoustic performance & fire resistance as compared to
plain steel section.
158 Ground Floor sqm 230.00 3650.33 0.00 8,39,575.90
159 First Floor sqm 98.90 3650.33 0.00 3,61,017.64
160 34 Wooden Pannel 0.00 0.00
Providing and fixing of 6mm thick Greenlam Compact High Pressure Laminate
(HPL) made out of thermosetting resin treated Kraft as core material and design
paper as a finish surface. Compact laminates should be resistant to water
immersion through permissible increase on thickness and mass. Compact should
fulfill the criteria under EN 438-4 Standards, classification of Anti-bacterial
(under JIS Z2801:2012 certification), Chemical resistance, Scratch resistant,
weather & climatic shock resistance (The manufacturer should provide 10 years
warranty certification on any manufacturing and moisture related defects), and
161 fulfill the criteria of GRIHA, Green Pro, FSC ,Green Guard Gold certifications 0.00 0.00
and manufactured under EN438-2&3:2005 standard . Finish and colour of
compact laminates should be finalised under direction of Engineer-in-
charge.Scope of work involves dimensional assesment of site and necessary
grooving on all sides of the product to be fixed with standard Aluminium
Channel as per manufactures specifications, that are of different variants provided
to suit functional and application requirement.
162 Ground Floor sqm 161.00 7427.63 0.00 11,95,848.11
163 First Floor sqm 161.00 7427.63 0.00 11,95,848.11
164 35 2.5cm thick Grading Concrete 0.00 0.00
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete
(1:2:2) using 6mm size black hard granite crusher broken chips and screened &
washed sharp sand for mortar and finished smooth to the rough surface of slab
165 including watering and curing with cost, conveyance, royalties of all materials 0.00 0.00
with cost of all labour, labour cess and T&P required for the work etc. complete
in all respect as directed by the Engineer in charge.
166 First Floor sqm 244.59 540.84 1,32,284.35 0.00
167 36 waterproofing 0.00 0.00
Providing and installing two component acrylic modified cementitious
waterproofing coating with Nerolac Perma Guard 2K/ Equivalent with Nerolac
Perma Fibre Mesh 45 GSM over roof slab after carring out pond test on roof
slab filling all defects. Saturating the surface mixing the products and then
168 application in 2.0 mm thickness (1.8kg/sqm coverage rate for 1.0mm thickness) in 0.00 0.00
suitable layers complete in all respect all material, tools, plant & labour complete
in all respect. Density 1850kg/m3, mix ratio (Powder to liquid ) 3.1 by weight
water.
169 First Floor sqm 244.59 548.23 0.00 1,34,091.09
170 37 MS Grill 0.00 0.00
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates,
garage door, collapsible gates with top and bottom rails, steel windows, critical
frames for windows, stair case and parapet railing made out of M.S Square bar/
flat including stair case hand railing with 40mm. dia G.I.pipe etc. including
171 painting two coats over a coat of redoxide primer as per approved drawing and 0.00 0.00
design with cost of all materials & labour, labour cess, T&P, sundries etc.
complete in all respect as per specification & direction of the Engineer-in-Charge.
172 Ground Floor Kg 63.36 143.08 9,065.23 0.00
173 Electrical Panel Room Kg 35.64 143.08 5,099.19 0.00
174 38 Synthetic Enamel Paint (Iron Work) 0.00 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
Painting two coat with approved synthetic enamel paint to new iron work over a
coat of Red oxide primer including cost, conveyances, royalties, taxes of all
175 materials and cost of all labour with T&P required for the work etc. complete as 0.00 0.00
per specification & direction of Engineer in charge.
176 Ground Floor sqm 2.88 312.46 899.90 0.00
177 Electrical Panel Room sqm 1.62 312.46 506.19 0.00
178 39 Textered exterior paint 0.00 0.00
Finishing walls with textered exterior paint formulated with modifies acrylic
emulsion and reinforced with quartz aggregate to withstand humidity, rain and
variable climates. With Pot life of thinned material -2 to 3 hrs., Touch dry-1/2 hr.
and drying period- 16 to 18 hrs of required shade ( two or more coats applied @
3.28 lyr/10Sqm) over prime coat of exterior .
180 Ground Floor sqm 162.00 126.97 0.00 20,568.82
181 First Floor sqm 178.20 126.97 0.00 22,625.13
182 Electrical Panel Room sqm 162.00 126.97 0.00 20,568.82
183 40 Plastic Emulsion Paint 0.00 0.00
Painting two coats with plastic emulsion paint with a approved quality primer to
make an even finished surface in all floors and heights to wall surface of approved
make and shade including sand papering, applying putty wherever necessary &
184 cost of scaffolding, staging charges with cost, conveyance, cost of all 0.00 0.00
labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-
charge.
185 Ground Floor sqm 1082.85 105.14 1,13,848.60 0.00
186 First Floor sqm 551.22 107.26 59,124.91 0.00
187 Electrical Panel Room sqm 104.07 105.14 10,941.24 0.00
188 41 Cement Primer 0.00 0.00
Priming one coat with wall cement primer (water bound) to make an even
finished surface in all floors and heights to wall surface of approved make and
shade including sand papering, applying putty wherever necessary & cost of
189 scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess 0.00 0.00
T&P etc. complete as per the direction of the Engineer-in-charge.
190 Ground Floor sqm 1244.85 97.47 1,21,332.97 0.00
191 First Floor sqm 729.42 99.83 72,816.04 0.00
192 Electrical Panel Room sqm 266.07 97.47 25,932.87 0.00
193 42 Putty 0.00 0.00
Finishing plastered surfaces of walls with cement based wall putty (Water based)
of approved make (JK White/ Birla white or equivalent make duly approved by
Engineer-in-Charge) and finishing the surface smooth and even by sand papering
194 to receive painting in walls, at all heights with staging wherever necessary with 0.00 0.00
cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the
work complete in all respect as per the direction of the Engineer-in-charge.
195 Ground Floor sqm 1244.85 100.54 1,25,152.16 0.00
196 First Floor sqm 729.42 100.54 73,332.47 0.00
197 Electrical Panel Room sqm 266.07 100.54 26,749.16 0.00
198 Sub-Total of Civil Works 55,99,546.420 77,96,754.380
200 Plumbing Works
1 A-Internal Sanitary & Plumbing System
Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor
PVC pipes conforming to C-PVC1785/89 ( Sch-80 ) and G.I pipe fittings of the following
nominal bore with clamps including making good the wall,ceiling and floor ,testing all
complete as per P.H. specification and direction of Engineer-in-charge .
In Ground Floor-
202 (a) 20mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 80 322.612 0.00 25,809.000000
203 (b) 25mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 40 426.806 0.00 17,073.000000
204 (c) 32mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 30 630.828 0.00 18,925.000000
205 In First Floor- 0.00 0.000000
206 (a) 20mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 40 335.238 0.00 13,410.000000
207 (b) 25mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 30 439.432 0.00 13,183.000000
208 (c) 32mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 20 645.342 0.00 12,907.000000
209 In Terrace Floor- 0.00 0.000000
210 (a) 40mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 40 909.898 0.00 36,396.000000
211 (b) 50mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 30 1344.846 0.00 40,346.000000
2 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following outside diameter conforming to ISI No.
13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including
jointing with supply of approved rubber lubricant by non-heat application method/as per
212 manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and 0.00 0.000000
refilling of trenches as per specification and direction of the Engineer in charge. (Supreme,
Astral, Ashirbad) .
213 (a) 75mm SWR pipes Mtr 90 399.902 0.00 35,992.000000
214 (b) 75mm PVC plain bend Each 12 217.12 0.00 2,606.000000
215 (c) 75mm PVC socket plain Each 15 95.934 0.00 1,440.000000
216 (d) 110mm SWR pipes Mtr 120 582.33 0.00 69,880.000000
217 (e) 110mm PVC 'P' trap Each 4 586.814 0.00 2,348.000000
218 (f) 110mm PVC 'S trap Each 8 652.54 0.00 5,221.000000
219 (g) 110mm PVC socket plain Each 20 188.918 0.00 3,779.000000
220 (h) 110mm PVC plain bend Each 16 273.76 0.00 4,381.000000
221 (i) 110mm PVC door bend Each 14 346.448 0.00 4,851.000000
222 (j) 110mm PVC door Tee Each 10 455.48 0.00 4,555.000000
223 (k) 110mm PVC plain Tee Each 14 380.786 0.00 5,332.000000
224 (l) 110mm PVC door cross Tee Each 12 650.416 0.00 7,805.000000
225 (m) 110mm dia U-PVC Offset without ear Each 10 480.732 0.00 4,808.000000
226 (n) 110mm PVC vent cowl Each 25 68.676 0.00 1,717.000000
227 (o) 110mm PVC Clamp Each 50 50.504 0.00 2,526.000000
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
3 Supply,Providing, fixing, testing and commissioning in position UV stabilised 75 mm dia
UPVC Rain water pipe with Fittings (IS: 13592 Type - B). In case of ceiling hanging, the
228 supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge.110 mm diameter. 0.00 31,117.000000
(IS:13592, Type -B).
4 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes
229 110 mm dia. 0.00 443.000000
5 Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern
Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, S Trap- 220
230 mm (CNS-WHT-853S220SPPSM) (Jaquar/ Hindware) 0.00 1,52,928.000000
6 Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern
Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, P Trap- 180
231 mm (CNS-WHT-853P180SPPSM) (Jaquar/ Hindware) 0.00 76,464.000000
7 Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with
cast iron or MS brackets painted white including cutting holes in walls and making good
the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for
wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste
pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing
pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long
screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet
connection pipe and making connection with pillar cocks and supply mains for wash basin ,
fixing 12mm dia CP brass waste etc.all complete as per specification and direction of
Engineer-in-charge.
(a) 560mm x 412mm size W. H. Basin with Porcelain Pedestal (CNS-WHT-301 Full
233 Pedestal for CNS-WHT-801) (Jaquar/ Hindware) 0.00 64,074.000000
234 (b) Waste coupling 32mm Size Full Thread with 80mmheight. Each 12 708 0.00 8,496.000000
235 (c) 15mm dia PVC inlet connection pipe 0.45m long Each 12 507.4 0.00 6,089.000000
8 Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the
following nominal bore with supply of all jointing materials complete as per specification
236 and direction of the Engineer in charge. 0.00 0.000000
237 (a) 15mm dia CP 2way bib cock (Jaquar/ Hindware) ( FLR-CHR-5041N) Each 12 2773 0.00 33,276.000000
238 (b) 15mm dia CP Health faucet (Jaquar / Hindware) ( ALD-CHR-565) Each 12 1504.5 0.00 18,054.000000
(c) Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower
Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand &
239 Overhead Shower) (FUS-CHR-29281) (Jaquar/ Hindware) 0.00 1,00,536.000000
240 (d) 15mm dia CP Angle stop cock (Jaquar / Hindware) (FLR-CHR-5053N) Each 20 1475 0.00 29,500.000000
(e) Shower Arm 600x252x25 mm square shape for wall mounted shower with flange (SHA-
241 CHR-455L600) (Jaquar/ Hindware) 0.00 38,232.000000
(f) Maze Overhead shower 300x300 mm square shape single flow with rubit cleaning system
242 (Jaquar / Hindware) (OHS-CHR-1639) 0.00 1,37,352.000000
(g) 20mm dia CP Consealed Stop Cock (Jaquar / Hindware) (ALD-CHR-081)
(h) Flexible tume 12mm dia. & 1.5m Long with nuts (SHA-CHR-549D12) (Jaquar/
244 Hindware) 0.00 15,222.000000
(i) Premium wall bracket for hand shower 35mm & 100mm lomg round shape (SHA-CHR-
245 555) (Jaquar/ Hindware) 0.00 7,080.000000
(j) Hand shower 75mm dia. Cylindrical shape (Rain massage & mist) chrome plated body
246 with gray cleaning system ( HSH-CHR-1797) (Jaquar/ Hindware) 0.00 53,100.000000
Toilet roll holder with stainless steel flap (AKP-CHR-35753PS) (Jaquar/ Hindware)
(k) Each 12 2124
248 (o) 15mm dia CP Pillar cock ( FLR-CHR-5021N) (Jaquar/ Hindware) Each 12 2065 0.00 24,780.000000
249 (p) 15mm dia CP extension piece (Jaquar/ Hindware) Each 20 111.274 0.00 2,226.000000
250 (q) 15mm PVC Connection Pipe (Jaquar/ Hindware) Each 22 101.48 0.00 2,233.000000
251 (r) 32mm PVC Waste Discharge Pipe (Jaquar/ Hindware) Each 10 162.84 0.00 1,629.000000
252 (s) 15mm dia. C.P flange (Jaquar/ Hindware) Each 32 59 0.00 1,888.000000
253 (t) 125mm dia CP gratting (Jaquar/ Hindware) Each 22 146.32 0.00 3,220.000000
254 9 Geyser Horizontal 15 LTR (Jaquar) ELM-LHS015 Each 12 11564 0.00 1,38,768.000000
10 Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass
bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per
specification and direction of Engineer-in-charge.
255 600mmx125mm size glass shelf with C.P ruard rail (ACN-CHR-1171N) (Jaquar/ 0.00 19,116.000000
Hindware)
11 Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail /
Towel ring complete with CP brass brackets fixed to wooden plugs with chromium plated
brass screws etc.all complete as per specification and direction of Engineer-in-charge .
256 Towel Rack 600mm Long with Lower Hangers, Stainless Steel (ACN-CHR-1181S) 0.00 46,020.000000
(Jaquar/ Hindware)
12 Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail /
Towel ring complete with CP brass brackets fixed to wooden plugs with chromium plated
brass screws etc.all complete as per specification and direction of Engineer-in-charge .
257 Towel Ring Round with Round Flange (ACN-CHR-1121BN) (Jaquar/ Hindware) 0.00 14,868.000000
13 Supplying all materials ,labour ,T&P and fixing CP Soap Holder/ Soap Dispenser
complete with CP brass brackets fixed to wooden plugs with chromium plated brass
screws etc.all complete as per specification and direction of Engineer-in-charge .
CP soap holder (Jaquar AKP-CHR-35731P) (Jaquar/ Hindware)
259 14 CP soap dispenser (Jaquar ACN-ACR-1135N) (Jaquar/ Hindware) Each 12 2584.318 0.00 31,012.000000
15 Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook alongwith all
necessary accessories complete including cutting, making good the walls, floors, slab
wherever complete in all respect as per specification and direction of the Engineer in
260 charge. (Jaquar/ Hindware) . 0.00 7,899.000000
Stainless Steel Coat Hook (Jaquar AKP-CHR -35761P)
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
16 Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm
thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass
screws and washers etc.all complete as per specification and direction of Engineer-in-
charge.
Mirror (Bevelled edge) 600mmx450mm
17 Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings of the
following nominal bore with supply of all jointing materials complete as per specification
262 and direction of the Engineer in charge. 0.00 27,831.000000
25mm dia Brass F.W valve (Sakti make)
263 18 32mm dia Brass F.W valve (Sakti make) Each 6 1630.406 0.00 9,783.000000
264 19 40mm dia CPVC Ball valve Each 4 1116.339 0.00 4,466.000000
20 Demolishing R.C.C. work by mechanical means and stockpiling at
designated locations and disposal of dismantled materials up to a lead of
265 1 kilometre, stacking serviceable and unserviceable material separately 0.00 21,455.000000
including cutting reinforcement bars.
21 Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to IS : 12701--1996 including cutting holes
through the tank and fixing mild steel tubes and fittings and providing extra sockets and
jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground
level and placing the tank to the required position and providing 1st class fly ash brickwork
in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support
the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size
1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in
cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,
watering, curing, conveyance of all materials to worksite etc all complete as per
specification and direction of the Engineer in charge.
Fixing 2000Ltr Roto-moulded water storage tanks-In Terrace floor
22 B- External Supply & Drainage portion
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a
268 floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 0.00 17,485.000000
150mmX150mm size CI grating etc.all complete as per drawing, specification and
direction of Engineer-in-charge.
In side size 250mmx250mm
23 Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size
760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken
hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and
plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4)
using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3)
with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab
(1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole
cover, earth work in excavation in all kinds of soil and refilling the cavity around the
chamber including watering,curing,cost of all materials, conveyance of all materials to
worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H
specification and direction of Engineer-in-charge .
Inside size : 760mmx760mmx460mm
24 Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized
PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa)
including jointing with supply of approved solvent cement by non-heat application method/
as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm
size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including
270 concrete for bedding and curing etc all complete as per PH specification and direction of the 0.00 58,461.000000
Engineer-in-charge.
110mm dia U-PVC pipe ( Allround concrete )
271 25 160mm dia U-PVC pipe ( Allround contrete ) Mtr. 25.00 2680.842 0.00 67,022.000000
26 Providing Lowering, Laying, Jointing and Testing Work of non-pressure NP 3 class
R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of
272 1:2 (1 cement : 2 fine sand) including testing of joints: 7,987.000000
273 Sub-Total of Plumbing Works 0.00 18,61,433.00
275 A. Electrical Works 0.00 0.00
276 Circuit Cum Wiring
1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point
with 1.5 sqmm FR PVC insulated copper conductor single core cable in
surface / recessed 1.6 mm thick PVC conduit with modular switch and
earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor
single core cable including providing modular box with cover of requisite
number of modules including providing cover plates as required. Each 159 1516.30
2 Supplying & Wiring from first light point to next Light Point (Secondary
Point) with 1.5 sqmm FR PVC insulated copper conductor single core
278 cable in surface / recessed 1.6 mm thick PVC conduit and earthing the 0.00 48,023.64
point with 1.5 sqmm FRLS PVC insulated copper conductor single core
cable including required single rose and Metal box. Each 51 941.64
3 Supplying & Wiring for twin control light point with 1.5 Sqm.m FRLS PVC
insulated copper condutor single core cable in surface / recessed PVC
279 conduit 2 way modular switch,modular plate,suitable GI box and earthing 0.00 35,088.48
the point with 1.5 Sqm.m .FRLS PVC insulated copper conductor single
core cable etc as required. Each 24 1462.02
4 Supplying and fixing two module stepped type electronic fan regulator
280 with proper modular plate switch box including connections etc. as 0.00 11,965.20
required. Nos 20 598.26
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
5 Supplying and fixing 6 Amp Socket with 6 Amp switch (Modular Type) on
existing board. Nos 64 285.56
6 Supplying & fixing suitable size GI Box with modular plate and cover in
front on surface or in recess, including providing and fixing 2Nos 3pin
5/6 amps modular socket outlet and 2Nos 5/6 amps modular switch etc.
as required. Nos 12 1151.68
7 Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards
consisting of a 16 Amp clip-in type modular switch with indicator and a
283 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic 0.00 23,448.96
concealed box including interconnections and making good the damages
caused complete as required and as per direction of Engineer-in-charge. Nos 24 977.04
8 Supplying, installation, testing & commissioning of 25 Amp AC starter
switch with 25 Amp modular socket outlet with 25 Amp Plug on surface
or in recess, on 2 Nos two module GI box with plate etc. complete with
direction of Engineer-in-charge. Each 12 2429.62
9 Wiring for circuit/ submain wiring along with earth wire of following size
285 of FRLS heavy gauge PVC insulated copper conductor single core cable 0.00 0.00
in heavy duty PVC conduit laid in surface/ recess as required. 0.00
286 a) 2X2.5 + 1X1.5 sqmm FRLS Cu wire Mtr 804 201.78 0.00 1,62,231.12
287 b) 2X4 + 1X1.5 sqmm FRLS Cu wire Mtr 360 221.84 0.00 79,862.40
288 c) 2X6 + 1X2.5 sqmm FRLS Cu wire Mtr 180 258.42 0.00 46,515.60
289 d) 2X10 + 1X6 sqmm FRLS Cu wire Mtr 100 562.86 0.00 56,286.00
290 Fan & indoor Fixtures 0.00 0.00 0.00
10 Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg
GI sheet and containing 10 mm dia round ms bar projecting atleast
291 150mm on either side & duly bent to accommodate ceiling fan down rod 0.00 3,091.60
bolt & having earthing arrangement as per direction of Engineer-in-
charge. Each 20 154.58
11 Supplying, installation, testing and commissioning following type of light
fixtures with dummy box for surface mounted fixtures only, fans and
292 exhaust fans with all accessories, as required.(The colour temprature for 0.00 0.00
fixtures shall be above 3500 deg K & white in colour as per application)
a) Recess Mounted LED Light fitting (1800 Lumen/ 18 W, CRI not less
than 80,CCT of 5700 degree K) consists of white powder coated , die-
293 cast Alluminium housing with high quality frosted diffuser for glare-free 0.00 3,34,645.64
uniform lighting distribution similar to Wipro (CAT No: LD06-221-XXX-
57SMG1 Each 94 3560.06
b) Recess Mounted LED Light fitting (900 Lumen/ 9 W, CRI not less than
80,CCT of 5700 degree K) consists of white powder coated , die-cast
294 Alluminium housing with high quality frosted diffuser for glare-free 0.00 66,778.56
uniform lighting distribution similar to Wipro (CAT No: LD06-111-XXX-57-
XX). Each 24 2782.44
c) Wall mounted 3watt (300Lumen) LED Foot Light with necessary
295 accessories and connections, Similar to (Wipro Cat no:-LT51-750-XXX- 0.00 44,901.36
57-XX ). Each 12 3741.78
d) Surface mounted 10 watt LED decorative alluminium Batten Light for
Mirror Lighting over wash basin,CRI not less than 80,CCT of 5700
degree K) consists of white powder coated , die-cast Alluminium
housing with high quality frosted diffuser for glare-free uniform lighting
distribution similar to Wipro (CAT No: LL20-111-XXX-65AL1).
e) Fabric Shade with Nickel finishing Table Lamp similar to Jaquar cat no:-
DTL-CHR-TL400WOS. Each 24 2702.20
f) 15watt per mtr strip light for ceiling cove structure. Similar to Wipro (cat
no:-Ls27 14 tb16 30 g1). Mtr 40 1770.00
g) Supplying and fixing call bell/ buzzer suitable for single phase,230 V,
complete as required. Each 12 456.66
12 Supplying, installation, testing and commissioning of BLDC ceiling fan
including wiring the down rod, earthing etc as required. 0.00
301 a) 1200 mm sweep Each 20 3688.68 0.00 73,773.60
13 Supplying, installation, testing and commissioning of BLDC MOTOR
302 Exhaust fan including louvres, Ceiling Rose & Electric Connection as 0.00 0.00
required. 0.00
303 a) 250mm sweep Each 12 3694.58 0.00 44,334.96
304 14 Block 1 LT panel 0.00 0.00 0.00
Supply, installation, testing and commissioning of cubicle type
sectionalised, front operated top entry dust and vermin proof M.V.Panel
Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution
system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with
heat shrienkable PVC sleeve, base channel, wiring with space heater,
thermostat and control MCBs shall be provided for all vertical sections of
main LT Panel, all hinged door shall be earthed through 2.5 sq mm
305 tinned braided, the incoming and outgoing feeders shall be 0.00 0.00
accommodated in a modular arrangement, detachable gland plates,
adequate size cable alley, Sign writing, Painting, Earthing, Numbering,
Danger plate, including PVC insulated copper FRLS wires of minimum
1.5 sq.mm & 2.5 sq.mm for CT's etc. with all accessories including
interconnections, earth bus, Surge protection Device(SPD) etc. as
required.
306 One (1)-Incomer feeders each comprising of 0.00 0.00 0.00
307 One (1) - 100A,TPN, 25KA,MCCB 0.00 0.00 0.00
308 One(1)- Voltmeter and ameter 0.00 0.00 0.00
One set - Indicating lamp for ON/OFF/Trip and Phase indication with
control fuse/ MCB. 0.00
310 One(1) set of 100/5A ,15VA , Cl 1.0, CTs. 0.00 0.00 0.00
Busbar -200 Amp Al busbar with SC rating of 25 KA suitable for
operation at 415 Volt, 50 Hz, 3 Phase supply 0.00
312 One (1) - Outgoing Feeders each comprising of 0.00 0.00 0.00
313 One (1) - 63A,FP, 10KA,MCB 0.00 0.00 0.00
314 Twelve (12) - Outgoing Feeders each comprising of 0.00 0.00 0.00
315 One (1) - 63A,DP, 10KA,MCB 0.00 0.00 0.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
*The Switchboard shall be complete with all interconnections, risers,
316 internal wiring, labels, control/circuit fuses or MCB, Space heater, 0.00 0.00
internal lighting & Thermocouple etc. complete as required. 0.00
317 PANEL AS ABOVE Set 1 109827.32 0.00 1,09,827.32
15 Supplying and fixing following way, horizontal type three pole and
neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,
interconnections, powder painted including earthing etc. as required.
(But without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs, ACDBs &
320 a) 4 way, Double door(8+12) Each 1 6028.62 0.00 6,028.62
16 Supplying and fixing following way, single pole and neutral,sheet steel,
MCB distribution board, 240 V, on surface/ recess, complete with tinned
321 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, 0.00 0.00
powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator). 0.00
322 a) 8 way, Double door Each 16 3770.10 0.00 60,321.60
17 Supplying and fixing following rating MCBs/ Isolator in the existing MCB
323 DB complete with connections,testing and commissioning etc. as 0.00 0.00
required. 0.00
324 a) 63 Amps, FP 10 KA MCB (C-Curve) Each 1 3701.66 0.00 3,701.66
325 b) 32 Amps, DP 10 KA MCB (C-Curve) Each 16 1243.72 0.00 19,899.52
326 c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 108 421.26 0.00 45,496.08
18 Supplying and fixing of following RCCB in the existing MCB DB in the
327 existing MCB DB complete with connections as per direction of Engg.-in- 0.00 0.00
Charge. 0.00
328 a) 63Amps 4P 415 volts RCCB 30 mA Each 1 5799.70 0.00 5,799.70
329 Cables, Cable Laying & Termination 0.00 0.00 0.00
19 Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power
330 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 0.00 0.00
331 a) 4C X 16sqmm Mtr 60 413.00 0.00 24,780.00
332 b) 4C X 35sqmm Mtr 60 728.06 0.00 43,683.60
333 c) 3.5C X 70sqmm Mtr 60 1165.84 0.00 69,950.40
334 CABLE LAYING 0.00 0.00 0.00
20 Laying and fixing of one number of PVC insulated and PVC sheathed/
335 XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not 0.00 33,559.20
exceeding 120 sq.mm on surface as required. Mtr 180 186.44
336 TERMINATION OF CABLES 0.00 0.00 0.00
21 Supply & Making end Termination with brass compression gland and
337 Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv 0.00 0.00
grade (without cost of Cable) 0.00
338 a) 4C X 16sqmm Each 2 269.04 0.00 538.08
339 b) 4C X 35sqmm Each 2 274.94 0.00 549.88
340 c) 3.5C X 70 sqmm Each 2 357.54 0.00 715.08
22 Supply, delivery, installation & testing of TV outlet boards containing a
clip-in type modular TV Socket outlet fixed on metallic concealed box
including connections and making good the damages caused complete
as required and as per direction of Engineer-in-charge. Each 12 311.52
23 Wiring to TV Antenna Socket outlet from junction box with Coaxial
copper conductor TV antenna cable run inside prelaid conduit complete
including termination, testing etc complete as required and as per
direction of Engineer-in-charge. Mtr 360 79.06
344 Inverter 0.00 0.00 0.00
24 Supply installation , testing & Commissioning of following rating of
invertor with battery and trolley as complete as required. Invertor shall
345 be suitable for 90 minute backup on full load as 0.00 1,18,000.00
per specification.
1600 VA, 220 Volt Set 2 59000.00
346 Dismantling 0.00 0.00 0.00
24 Dismantling of Existing electrical panel and shifted to new panel room and
Reinstalling of panel. Ls 1 35400.00
348 EPBX System 0.00 0.00 0.00
Supplying and fixing of Hybrid EPABX system equipped with 128 Analog
349 1 extensions and 6 Analog Trunk, including required hardware and 0.00 1,77,000.00
software etc as reqd. Set 1.00 177000.00
350 2 Supplying Digital telephone sets with colour ID as required. Nos 13.00 1416.00 0.00 18,408.00
351 3 S/f of 50 pair krone box with k2 no. krone module Nos 2.00 2655.00 0.00 5,310.00
Supplying and drawing following pair 0.5 sq mm FR PVC insulated
352 4 annealed copper conductor, unarmored telephone cable in the surface/ 0.00 0.00
recessed steel/ PVC conduit as required. 0.00
353 a 2 Pair Mtr 600.0 41.30 0.00 24,780.00
354 b 20 Pair Mtr 50.00 241.90 0.00 12,095.00
Supply, installtion, testing and commisioning of Rj11 Telephone outlet.
356 Lan System 0.00 0.00 0.00
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit,
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style
Face plate 86x86 mm with Curveture and wall mount box. Nos 13 1117.46
359 8 Supply & fixing of Cat6 24 Port Loaded Patch Panel. Nos 1 10827.68 0.00 10,827.68
Supply & Installation of Cat6 Factory crimpped moulded patch cord,1mtr,
Supply & Installation of Cat6 Factory crimpped moulded patch cord,
2mtr. Nos 2 454.30
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE
Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps,
Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE
362 11 power budget 270 Watt, Switch should support IEEE 802.3af & IEEE 0.00 48,026.00
802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature
Working 0°C~50°C, storage -40°C~70°C, Power Supply AC:
100~240VAC. Nos 1 48026.00
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable
manager and H/W Pkt. Nos 1 9648.86
Supplying and fixing of following sizes of medium class PVC FRLS
conduit ISI marked along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed conduit
as required as per direction of Engg.-in-Charge . 0.00
365 a. 20 MM Mtr 200 145.14 0.00 29,028.00
366 b. 25 MM Mtr 300 147.50 0.00 44,250.00
367 ATTENDANT CALL BELL SYSTEM 0.00 0.00 0.00
SITC of Wireless Attendant/ Service Call System, with LED Display &
Power Supply. The LED display & indicate the Number of Rooms/Table
of call, 2 ringing tones , built-in multioptions for identification of calls from
rooms or Table, 99 Calls 1 Group show at a time & 32 Stored in row,
14 Volume Adjustment. Setting Key available for change of functions. Set 1 34515.00
SITC of Wireless Call Button with Battery Call & Cancel 2Key
369 Option,(Call & Cancel) Waterproof, Elegant Design . Kept with Guest 0.00 41,418.00
15 House Rooms. No 12 3451.50
SITC of Wireless Call Button Stand Note Kept at Guest House Room or
16 fix it. No 12 619.50
SITC of Wireless Corridor Lamp with Accessories.3 color door indicator.
17 Beep/blink light alerts. Adapter 12V power operated. No 1 4690.50
SITC of Signal repeater Increase transmission distances.Avoid call
18 bouncing. No 1 13983.00
373 Sub-Total of Electrical Works 0.000 26,67,436.020
376 Grand Total 55,99,546.420 1,23,25,623.400
376 Grand Total 55,99,546.420 1,23,25,623.400
Digitally signed by JAYA
PRAKASH GURU
Date: 2025.10.28 16:38:17 IST
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT.pdf
Tender Document
GCC.pdf
Tender Document
TENDER BOQ.pdf
Tender Document
SCC.pdf
Tender Document
Approved Makes.pdf
Tender Document
Technical Specification.pdf
Tender Document
Drawings.pdf
Tender Document
Technical Circular.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .