REPAIR AND REPLACEMENT TO ROAD FURNITURE IN ZONE-III AREA UNDER GE(S) JAIPUR

Amount

Supply and fixing in repair Long delineators of CRCA Pipe 90cm long & 45/50mm dia MS pipe painted with powder coated or stove enamelled white/black colour provided with wire gauge for safety of reflector of three strips each of 50mm wide of red, yellow and white diamond grade Micro prismatic type IX retro reflective sheeting embedded in PCC (1:2:4) type B1 with 20mm graded stone aggregates size of block 30cmx30cmx30cm etc complete all as specified and directed by engineer in charge Make: - Dark eye, 3M, TATA BP/Gogia Plastic/ Tata VPI as approved by GE.

Supply and fixing in repair Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector fixed with and including MS stud of suitable size as per manufactures instructions etc complete all as specified and directed Make: Cat Part Model NO DA-972 of dark eye or equivalent in TATA BP/Gogia Plastic/ Tata VPI as approved by GE.

S&F in replacement solar cat eyes (studs) made of aluminium di-casted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystalline solar panel (2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargeable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela) view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardener etc as per manufacturer’s instructions at the location etc complete all as specified and directed. Model:- “DHRUV in dark eye or equivalent in TATA BP/Gogia Plastic/ Tata VPI as approved by GE.

Supplying and fixing in Repair retro reflective Overhead informatory road signage boards size 180X120 cm, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures along with 75mm dia, 2 Nos MS post of height 3 meter and 450mm long 40x40x6 mm, 2 Nos angle iron holdfast including painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet and synthetic enamel paint on structure frame including appropriate priming coat at bottom. PCC (1:2:4) type B1 using 20mm graded stone aggregate shall be provide in foundation of post. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position, including necessary earth work returning filling, removal and form work etc. complete as per drawings, specification and direction of the engineer-in-charge

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like not exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed.

S&F in repair delineator with two high performance 100mm Dia reflectors and two rectangular reflectors of 70mmx23mm are fixed on both sides of Guide Post. The body of Guide Post is moulded in ABS plastic and it is fixed on powder coated steel pipe of 1010 mm long embedded in PCC (1:2:4) type B-1 using 20mm graded stone aggregate( Size of block 30cmx 30cmx30cm) complete all as specified and directed. Make: Cat Part Model NO DA-74 of dark eye or equivalent in TATA BP/Gogia Plastic/Red Safe/Froniter/Tata VPI as approved by GE.

S&F in repair Plastic Speed Bump designed bear maximum load size 500mm x 350 mmx50mm made with PE plastic material with two highly reflective reflectors moulded in PMMA material welded along with ABS base plate through ultrasonic welding process and fixed on the speed bump with Yellow and Black colours etc complete all as specified and directed. Make:- Cat Part Model NO DA-1009 of dark eye or equivalent in TATA BP/Gogia Plastic/ Tata VPI as approved by GE

Supply and Fix in repair traffic convex mirror round shape of 800mm to 1000mm dia with ABS back of approved quality including pole bracket arrangements fixed as per manufacturer's directions etc. complete all as specified and directed. Make: Convex mirror of Dark eye or equivalent as in /Tata VPI/ Gogia Plastic/3M

Demolition Cement concrete (unreinforced ) concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates as in sub base of floors etc complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

Schedule of Credit

JAGDAMBA CONSTRUCTION COMPANY

M/S JALANDRA CONSTRUCTIONS

UNIVERSAL INFRAPROJECT PVT LTD

LAKSHMI ASSOCIATES

M/S Anil Enterprises

SAI MAX INFRAPROJECTS