PROVN OF SEATING GALLERY AT GOLDEN FISH PHYSICAL TRAINING AND SPORTS COMPLEX AND PROVN OF 01 X TOILET FOR UNIT GURUDWARA SAHIB OF 510 ABW BASE WKSP UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Excavation over areas, n.exc 1.5m deep and getting out in Soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations , filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks (Old size bricks) straight or curved on plan exc 6m mean radius, built in in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks (Old size bricks) straight or curved on plan exc 6m mean radius, built in in cement mortar 1:6 complete all as specified and directed.

M&L for returning , filling in , including spreading , levelling, watering and well ramming in layer not exc 25cm complete all as specified and directed.

Removing excavated soil exc 50m and n.exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directied.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping and similar work including necessary form work complete as specified and directed .

M&L for Dholpur stone (Beige colour) slab size 600mmX600mm in flooring 20-30mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and matching colour of joints and making good and including 15mm thick screed bed or bedding layer cement mortar 1:6 for laying floor finishes complete all as specified and directied .

All as per item No 8.00 above but on vertical surface and including backing coat of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for providing and fixing stainless steel railing ( Grade-304) 19 gauge made of hollow tubes, channels , plates balusters etc, including welding, grinding, buffing , polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories, globes at top of balusters & stainless steel dash fasteners, stainless steel bolts, round plates rings drillings of holes and making good etc. of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.

M&L for broken brick hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor, surface finnished even and smooth without using extra cement complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n exc. 1.5 m depth for foundation etc or for shafts , well, cesspits, manholes, pier hole etc not exc. 10 sqm on plan and n exc. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling-in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregates) in foundation/filling mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregate) as in slabs complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to be finished even and fair as in plinth protection complete all as specified and directed.

S&F TMT steel bar 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 24.00 above but 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; for rough finished flat surfaces of conrete complete all as specified and directed.

M&L for formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of conrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished flat surfaces of conrete complete all as specified and directed.

M&L for form work for rough finished flat surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for form work for rough finished flat surface to edges of concrete flat, break in floor.cills,railings etc.& similar works, exc 10 but n exc 20cm wide complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for cement plaster in two layers (10 + 5) first layer 10 mm in cement mortar 1:6 and top finishing layer 5 mm thick in cement mortar 1:4 using WPC in 5 mm thick second layer on brick work or concrete surfaces finished even and fair. complete all as specified and directed.

M&L rendering 5 mm thick on ceiling in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound(powder) only.complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer on plastered surface of wall and priming surface with priming paint complete all as specifiedand directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specifed and directed.

M&L for three coats of white wash on newly plastered surface or unplastered surfaces of celling including preparation surface complete all as spd and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S & F glazed ceramic colured tiles in vertical surface 300x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick bedding layers in cement mortar 1:4 , complete all as specified and directed

S&F GI water tubing medium grade galvanised with all fitting complete etc fixed to walls, floors and ceiling 15 mm bore complete all as specified and directed

Ditto all as per item No 40.00 above but 20 mm bore complete all as specified and directed.

S&F 20 mm dia stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed down both ends for iron pipe or for brass ferrule fixed in repair all as specified.

S&F bib tap chromium plated, fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F angle stop cock, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified and directed

S&F 15 mm CP brass pillar tap with capasten head screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed for iron pipe complete all as specified and directed.

S&F Vitreous china wash hand basin, white flat, size 550 x400 mm including brackets, CP brass waste coupling and PVC waste pipe all as specified and directed by Engineer - in - Charge.

S&F CP brass soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S& F PVC connection 15 mm size with PTMT nuts and 450 mm long complete all as specified and directed.

S&F 10 ltrs capacity PVC valve less ,syphonic action type flushing cistern ,low level of required colour with inlet, ball valve, float and handle including brackets , PVC bend 32 mm dia and connections to pipes etc complete all as specified and directed.

S&F for vitreous china wash down water closet pan (Pedestal type) including plastic water closet seat cover white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as spcified and directed.

S&F 110 mm dia PVC (SWR) pipes any length and in any position complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes any length and in any position (with clamps in wall) complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SRW) vent cowl for 75 mm dia PVC pipe complete all as specified and directed.

S&F rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs including 20mm bore brass float valve complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC door frame of size 50x47 made out of 5mm printed PVC sheet , reinforced with ms square tube complete all as specified and directed.

S&F 30 mm factory made solid panel PVC door and cup board shutter consisting of frame made out of M.S tube for top and bottom rail, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet stip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain close PVC sheet to be fitted in MS frame welded/sealed to the stiles and railes with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame and site as specification all as specified.

S&F MS butt hinges of size 100mm ,medium weight cold rulled complete all as specified and directed

S&F aluminium anodised tower bolt ,anodised ,length of bolt 150 mm complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed.

S&F mild steel ventilator /window with top hung shutter incl, MS peg stay complete all as specified and directed.

M&L for prepration of undecorated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqmin each pan complete all as specified and directed.

M&L for 10 mm thick plaster in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 200ml per 50 Kg bag of cement or as per manufacturers instructions complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning all as specified and directed .

M&L for APP based polymeric membrane minimum weighing 3.50kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed .

M&L for applying two coat of btuminous aluminium paint all as specified and directed .

M&L for brick work with fly ash bricks , straight or covered on plan to any ratio in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

S&F vitreous china urinal half stall type white ( excluding flushing cistern including connection to flusing pipe and out going pipes including PVC waste pipe & waste coupling complete all as specified and directed.

S&F vitreous china squatting pan of pattern 'long pan; size 580mm while with 'P' or 'S' trap, front or back inlet and foot rest any pattern and concrete bedding complete all as specified and directed.

M&L for concrete bed 1:3:6 type C 2 using 40 mm graded stone aggregate to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested completed all as specified and directed.

M&L for 150 mm dia salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 ( using 20mm gradded crushed stone aggregates ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and necssary form work complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dollyplasticsheet screwed with brass screws, cupwashers complete all as specified and directed. for One light/Exhaust/Fan point controlled by one, one way switches 5/6 Amps complete all as specified and directed.

All as per item No 77.00 above but One 3 pin 5/6 Amps socket outlet point on independent board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

All as per item No 77.00 above but One 3 Pin 5/6 Amps socket outlet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

All as per item No 77.00 above but with 2.5 Sq.mm for one 3 pin socket outlet 15 Amps on independent board controlled by one 15 amp switch.

S&F switch piano flush button single pole, one way 5 Amps complete all as specified & directed

S & F switch outlet 3 pin, 5 Amps, flush type complete all as specified and directed

S & F switch piano flush botton single pole one way 15 Amps complete all as specified and directed

S & F switch outlet 3 pin, 15 Amps, flush type complete all as specified and directed

S&F of ceiling rose, surface type, bakelite, 65x 50mm, three terminal complete all as specified & directed.

S & F lamp holder insulated body with back plate fix done anodised 100x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500 K complete all as specified and directed. Make:- Havells

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 10 watts, 6500 K complete all as specified and directed. Make:- Havells

S&F 1X35 W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 25 mm dia GI pipe medium grade upto 1.4 mtr long bend to shape aincluding MS clamps made out of flat iron of size 32x 4 mm- 02 Nos and necesssary nuts, bolts washer as required complete all as specified and directed.

S&F LED lamp 9 watt 6500k, 240 volts complete all as specified and directed

S&Fand laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 10 sqmm 2 core complete all as specified and directed

M&L for clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable complete all as specified and directed.

S&F GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed.

S & F Exhaust fan AC single phase 230/240V size 300 mm sweep with louves metal body complete all as specified and directed

Arun Construction Co.

SA construction co.

M/S AMAR ELEKTRO CENTRE