PROVN AND INSTLN OF RECYCLING INCINERATOR MACHINES I.E. PLASTIC WASTE SHREDDER WITH COVERED DUSTBINS AND STANDS AND CERTAIN MINOR AND REV WORK UNDER AGE EM AT MIL STN NASIRABAD

Amount

M & L for supplying, installation, testing and commissioning of Incinerator system operated by high temperature heating elements made of KANTHAL A1, electrically operated 3 phase, 415 Volt, 50Hz with high efficiency Single Chambered Incinerator suitable for disposal of all kind of solid wastes. The equipment having solid state temperature controller with Digital Display, Operating Switches, Indicators and high-grade thermal insulation along with control panel with flue discharge system. The incinerator, Single chamber type coupled Chimney with detailed specification of equipment as incl following :- (A) INCINERATOR :- 1. Operation : Electrical 2. Type of Waste : Plastic and Paper Waste 3. Burning Capacity : 02-05 kg/hr. 4. Mode of heating : Electric 5. Feeding : Manual 6. Equipment : Static/Portable (B) PRIMARY CHAMBER:- 1. Type : Static 2. Material of Construction : M.S. - 3MM 3. Ignition : Automatic 4. Temperature Control : Automatic 5. Inside : High Alumina Refractory line with insulation brick

Incl all as per Item No 1.00 above but continue:- (C) COMBUSTION FAN:- 1. Type : Centrifugal 2. Modulation : Provided 3. MOC : M.S 4. Drive : Direct (D) CONTROL PANEL :- 1. Type : Digital 2. MOC : M.S 3. Type of temperature controller : Digital 4. Finish & Painting type : Powder Coated 5. Auto cut of Burners/Heaters : Provided (E) CHIMNEY HEIGHT :- 1. MOC : M.S 2. Height : 3 mtrs Make : M/S Radhika Engineers (Model No RE-105E), M/S Mircroteknik and equivalent as approved by GE Note: The cost of construction of shed with 0.5mm thick 550MPA galvalume sheet with ridge of size 3x3 mtr with column of MS pipe of dia 100mm medium grade and height of 3.5mtr and PCC 1:2:4 type B-1, using 20mm graded stone aggregate for foundation is included in above quoted rates. Warranty: The warranty period for equipment and material will be 24 months from the date of completion of work, against all manufacturing or design defects.

S & F of DOL starter in sheet steel enclouser suitable for 7.5 KW Electric Incinerator, 3 phase , 415 volt , 50 Hz , with maximum overload relay range 9-15 Amp, On/Off and trip indication including making all electrical connection to run the incinerator all as specified and directed. Make : C&S Electric, L&T, Schneider Electric and equivalent as approved by GE

Supply only of plastic covered wheel with metal bracket garbage bins for collection of Solid Wastes of office, mess and residential areas of capacity 660 liter with openable top garbage bin cover in proper packings and delivery to office store yard all as specified and as directed. Make : Aristoplast, supreme Industries, Neelkamal and equivalent as approved by GE

Supply only of plastic covered wheel with metal bracket garbage bins for collection of Solid Wastes of office, mess and residential areas of capacity 120 liter with pedal for opening of top garbage bin cover in proper packings and delivery to office store yard all as specified and as directed. Make : Aristoplast, supreme Industries, Nilkamal Limited and equivalent as approved by GE

Supply, laying, Jointing connecting of LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm, 3.5 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. (Note :- Earth work, excavation shall be measured & paid separately under respective item of BOQ)

Supply, laying, Jointing connecting of LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable etc and getting out in soft/loose soil complete all as specified and directed.

Returning,filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L for bricks for protection cover to under ground cable (with old size sub class 'B' bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm complete all as specified and directed.

M & L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed.

Supply , install & testing hot and cold Split Air conditiioner electric driven suitable for single phase AC, 230 volt, 50 Hz supply , remote control unit with plasma filter for better indoor air quality , not less than 3 Star rated of capacity 2 Ton of refrigeration, with stand for fixing of out door unit and necessary copper tubing as per ground requirement with opening of space/holes and making necessay PCC/Pastering works and making good surface complete all as specified and directed. Make :- Daikin/Carrier/Hitachi as approve by GE

S & F for Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 90 to 300 volts mainline digital voltage stablizer with stabilized output voltage 230 volt with accuracy +/- 2.5 % and speed of correction 8 volt per second of capacity 5 KVA with Digital Displajy complete all as specified and directed. Make: Microtek/V-Guard/Pixel

M & L for sub main wiring alongwith earth wire with 2 runs of 6 sqmm for phase and neutral and 1 run of 6 sqmm for earth FRLSH PVC insulated copper conductor single core multristranded cable phase and neutralstranded copper conductor 1100 volts grade in PVC caping & casing ISI marked fixed on roof/cielling/wall all as per site requirement with all fixing arrangement like clamps screws, socket, bend etc as per IS including earth continuity conductor of size 6 sqmm single core copper conductor multistranded cable connected to common earth dolly complete as directed.

S & F for Sheet metal enclosures ac box with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug with socket complete with one single pole 20 Amp, 10 KA, 'C' curve MCB all as specified and directed.

S & F for copper tubing of suitable size with insulation for connection of indoor unit required in additional to the standard length of pipe given in the AC unit including bending, connecting complete all as specified and directed

Supplying and laying un reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

S & F for installation, testing and commissioning of new water heater storage type outer ABC body, electric suitable for single phase ,50HZ, AC supply, 2 KW heating element , with safety fusible plug confirming to relevant IS of 25 ltrs capacity 3 star rated, Horizontal fixed with fastner of 6 inches set of 4 and with connection pipes of stainless steel SS 304 grade pack of with PTMT nuts of length 24 Inches and testing all as directed. Make:-Havells/Jaquar/Venus as approved by GE.

S & F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 4 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed.

S & F of MCB SPN, 240 volt, 36 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F for GI Tubes 15 mm dia medium grade with all fittings and fixed complete to walls/floors/trenches complete all as specified and directed.

S & F for Bib tap brass CP screwed for iron pipe of size 15 mm bore complete all as specified and directed.

Cutting existing steel tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fittings. (i.e. union, nipple,reducing tee) for branch connection of internal dia 15 mm dia complete all as specified and directed.

S & F for stop valve brass CP high pressure both ends screwed for iron pipe of size 15 mm dia complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly One light point/Exhaust Fan point controlled by one, one way switch compete all as specified and directed.

S & F for switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed.

S & F for exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 230/250mm with making of Space/hole of appropriate size and necessary fitting nuts bolts and legs required for Installation with opening of space/holes with making necessary PCC/plastering works and making good surface complete all as specified and directed.

S & F for exhaust fan, steel body AC single Phase 230V of size 300mm sweep not less than 1200 rpm with, lades, and frame and louver with making of Space/hole of appropriate size and necessary fitting nuts bolts and legs required for installation with opening of space/holes with making necessary PCC/Plastering works and making good surface complete all as specified and directed.

Cutting existing steel tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fittings. (i.e. union, nipple,reducing tee) for branch connection of internal dia 15 mm dia complete all as specified and directed.

S & F for aluminum air termination rod 12 mm dia 300 mm long with cast aluminium base ball having 1/5 pointer attached to structure with fixed base plate on roof with 2nd class hard wood block support 150mm x 150 mm x 200 mm with nut bolts and washers /screw of proper size complete all as specified and directed.

S & F for aluminium strip of size 25 x 3.15 mm on wall / on roof with seasoned wood block support of size 100 mm x 100 mm x 150 mm fixed on wall by 200 mm long bolts grouted in wall / on roof and over roof with proper junction joint & bonds fastened with nuts bolts & washers/screw of size as per site requirement including connecting one end to air termination rod & another end to test point terminal box complete all as specified and directed.

S & F for galvanised iron strip 32 x 6 mm burried in ground/passing through pipe complete all as specified and directed.

M & L for test point terminal box made of gunmetal or phosphorus bronze size 75 x 75x 25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal heads screw complete all as specified and directed.

M & L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6.30 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. (Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.)

M & L for Cable jointing kit for 1100 Volts grade heavy duty cable straight through joint kit(heat shrink type) complete with jointing material and accessories suitable for 4core underground conductor cables of size 16 Sqmm to 50 Sqmm including testing complete all as specified and as directed. Make : Yamuna densons, Raychem, 3M India and equivalent as approved by GE

S & F for Double Wall Corrugated(DWC) HDPE Pipe of size 63 mm Outer Dia x 50 mm Inner Dia Pipe as per new IS-16205 (for electrical cable uses) in protection of UG Cable laid in trenches of following sizes complete all as specified and as directed. Note : Cost of pipe coupler with rubber ring and suitable clamp for fixing on wall/surface/roof is deemed to be included in the unit Quoted Rate.

M & L for boaring holes horizontally under Road by trenchless technology without damaging the surface of road as per given/ directed depth below the road surface with the help of boring machine/ or by manual means and laying of DWC Pipe of any dia for passing of UG cable all as specified and as directed. (Note : DWC pipe laid shall be measured seperately).

M/S JAGDISH PRASAD AIRUN (BID ID -3412830)

KIRTIMAN TRADERS (BID ID -3413169)

M/s Kishan Gopal Agarwal (BID ID -3424337)