REPAIRS TO ROOF TREATMENT, FIN FACIA, CHAJJA, FLOOR PLASTER PLUMBING AND SANITARY ITEMS IN TECH AREA AT AF STN UTARLAI

Amount

Taking down roof tratment any type any description on top of roof not exceeding 10cm thick including removal of rubbish out side MD and complete all as specified and directed

M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed

M&L for applying roof treatment on top of roof with minimum 3mm thick APP modified polymetric membrane with non woven polyester reinforced (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminious oil based primer ( IS : 3884) @ 250gm / Sqm and minimum weighing not less than 3 kg/Sqm complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer's instruction complete all as specified and directed

Taking up or down existing steel water tubing 15mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

Taking up or down existing steel water tubing 20mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

Taking up or down existing steel water tubing 25mm bore alongwith connections fixed/laid in any situation complete all as specified and directed

S&F for galvanised iron steel water tubing 15mm bore "medium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 15mm bore and connections new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth on stone concrete block or slab wall complete all as specified and directed

S&F for galvanised iron steel water tubing 20mm bore "midium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 20mm bore and connection new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

S&F for galvanised iron steel water tubing 25mm bore "midium grade" with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Fixing only after cleaning old steel water tubing 25mm bore and connection new or old position fixed to wall/ceiling or laid in floors complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres complete all as specified and directed

Dismantling water tanks capacity exc 250 litres and n exc 500 litres complete all as specified and directed

Dismantling water tanks capacity exc 500 litres and n exc 1000 litres complete all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note: PVC tank shall be ISI marked having two layers

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed Note: PVC tank shall be ISI marked having two layers

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density platstic ball screwed for iron pipe (Minimum weight 20mm-210gms) complete all as specified and directed

S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in water tank plate form including necessary form work to side of concrete complete finished even and smooth without using extra cement all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for 10mm thick rendering in CM 1:3 on ceiling /concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation on new plaster surface of ceiling & applying three coats of white wash complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying three coats of white wash on walls complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed

Taking down rain water pipe including fittings 110mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and stack clamps as in rain water pipes complete all as specified and directed

S&F 110mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed

Dismantling of brick work or stone/boulder/PCC block masonary built in cement mortar of any description and any position complete all as specified and directed

M&L for precast cement concrete block masonary with solid blocks made of PCC (1:3:6) type C-1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base and foundation of concrete complete all as specified and directed

M&L for cement concrete 1: 2 :4 type B-1 (using 20mm graded stone aggregate) finished surface even and smooth without using extra cement complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in bedding layer to floor tiles finished even and fair complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B--2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in floor hard standing complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in plinth protection complete all as specified and directed

Dismantling of mild steel work of any description complete all as specified and directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 210 Gde E 165 complete all as specified

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410W (Gde-E-250) quality-A complete all as specified.

M&L for preparation of new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old steel surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Dismantling of plain or corrugated AC sheeting in roof coverings complete all as specified and directe

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls fixed with L type or J type or cranked hook bolt/self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls fixed with L type or J type or cranked hook bolt complete all as specified and directed

S&F mild steel flat iron as wind ties of grade Fe-290 Gde-E-165 or roof including including drilling holes securing bolts etc and similar work complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured joint free tiles of size (450x300 mm) x 7mm thick in dados skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick plaster in CM 1:4 finished even & fair complete all as specified and directed

M&L for non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 finished even & fair, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc.to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 finished even & fair, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

-ditto- as per item Ser No 55 above but on skirting, dado laid over and including 10mm thick cement plaster in CM 1:4 finished even and fair complete all as specified and directed

M&L for vitrified ceramic double charged dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm,(size of tile 600x600mm) each in floors etc. set and jointed in neat cement slurry, over 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match

All as per item no 57 above but on skirting dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick (size not less than 550x500mm ) including provided white marble border of 18-20 mm thick and 150mm set and jointed neat cement slurry laid over and including cement screed base 20mm thick in CM 1:6 finished even & fair and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and polishing mirror finish type complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick as in window cill skirting treads etc over cement screed base laid over and including 15mm thick rendering in CM 1:4 finished even & fair and jointed neat cement slurry with grey cement slurry with pigment to match the shade of the slab including rubbing, cutting and polishing mirror finish type complete all as specified and directed

M&l 20mm thick granite (of any type) work (table rubbled and polished ) for urinal partion work fixed in wall jointed together two pieces with stone adhesive including chase pinning in wall edge grinding & polishing complete all as specified and directed

Demolition of cement concrete (reinforced) as in fin facia chajjas etc ( other than ground floors) beam, staircas, landing and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed

M&L for RCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof, slab, lintel, chajja, beam, columns, RCC facias etc including necessary formwork complete height upto 16 m from ground level all as specified and directed

M&L for drilling hole in roof, slab, beams, column, lintel, chajjas, fascia etc chemical anchoring of reinforcement on existing columns / chajja / beams with hilti HIT-HY 70 or equivalent in Thermax, minimum hole depth 100mm, steel bar 12mm dia and drill bit dia 14mm complete all as specified and directed Note : Reinforcement steel measured and paid separately.

S&F in repairs GI chicken wire mesh of 0.71 mm dia wire & 12mm mesh size fixed with nails & screws around RCC chajjas/facias etc complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, fin facia, chajjas finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type crutch or butter fly handle screwed down screwed for iron pipeor for brass ferrule and fixed complete all as specified and directed

S&F in repair vitreous china squatting pan orissa pattern size 580x440 mm white with integral foot rest complete all as speicified and directed

S&F in repair 10 litres capacity PVC valve less, symphonic action type flushing cistern low level white with inlet ball valve float & handle including brackets complete all as specified and directed

S&F 100 bore cast iron 'P' or 'S' trap with cement joint complete all as directed

S&F in repairs stainless steel grating doom of 100mm dia with / without central hole set over the existing nahani trap/ floor trap in neat cement & pointed to match the floor finished all as directed

S&F in repairs vitreous china wash hand basin size 550x400mm including vitreous china pedestal brackets with and including one No PTMT waste coupling 32 mm size, 1 No PVC connection 600 mm long, 15 mm bore a CP cast copper alloy fancy type pillar tap quarter turn type complete flexible PVC waste pipe of suitable length all as directed at site

M&L for preparation on old plaster surface of walls & applying one coat of cement base paint complete all as specified and directed

S&F in repairs vitreous china urinal, half stall type, white including suitable size waste coupling and waste pipe complete all as specified and directed

S&F in repairs WC pedestal pattern wash down type (European type WC), white or coloured superior quality including plastic seat cover and making good to the disturbed surfaces complete all as specified and directed

S&F in repairs 15mm bore cast copper alloy, chromium plated, angle valve quarter turn fancy type with flange plate complete all as specified and directed

S&F in repairs 15mm bore cast copper alloy, chromium plated, two ways angle cock quarter turn fancy type with flange plate complete all as specified and directed

S&F in repairs 15mm bore stop valve of cast copper alloy quarter turn type screwed down high pressure with crutch or butter fly handle fancy type chromium plated, with long shank and cup (concealed type ) complete all as specified and directed

S&F in repairs 15mm bore cast copper alloy, chromium plated, health faucent with 1.0 meter long CP flexible pipe complete all as specified and directed

S&F in repairs stainless steel towel rail round 200mm dia with round flange of standard quality fixed with steel screw and PVC rawl plug complete all as specified and directed

S&F in repairs chrimium plated shower rose fancy typewith swivel joints including shower arm 15mm dia 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repairs urinal spreader of PTMT any colour for fixing with 15mm dia pipe minimum weight 60gms complete all as specified and directed

S&F in repairs PTMT jet spray for EWC with flexible pipe with PTMT nut & bolt complete all as specified and directed

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed

M&L 12mm thick perforated /semi perforated particle board/tiles for insulation and accoustic purposes 60x60cm in size, fixed with staples on snap grid in ceiling complete all as specified and directed

S&F false ceiling anodised aluminium snap grid frame work for false ceiling, grid size 60cmx60cm with the following section for frame work:- (a) wall side angle 24x24x0.43mm (b) Main tee 24x34x0.35mm (c) cross tee 24x25x0.30mm having integral splices at both ends for interlocking complete with suitable hanging arrangement of metalic fastners, holding cleats 6mm dia GI wire suspenders etc complete all as specified and directed

S&F in repairs for 75mm dia PVC (SWR) floor trap plain including jointingwith solvent cement Complete all as specified and directed

Demolition of cement concrete (reinforced) roof, floor ( other than ground floors) beam, staircas, landing chajjas and similar suspended work complete all as specified and directed

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on wall beams and column in floor roofs landing complete all as specified and directed

Use waste of formwork to soffits of suspended slabs such as roof slab, beam, beam haunching, girders bressmers, lintel, cantilevers including supports overhangs etc also splays between floors and beam etc rough finished surfaces of concrete complete all as specified and directed

Use waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified.

RAIKA ENTERPRISES

AMBEY MAA CONSTRUCTION COMPANY

Rasam Engg Co.