Pennathur/MLACD/Drama Shed

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, excluding hard rock requiring blasting, etc. complete. complying with std. specifications.SS 20 B TNDSS No 23 & 24VI(S2) VII 9,10

Cement Concrete 1:4:8 Mix (one cement, four sand and Eight aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site, labour charges for mixing. Laying and curing, finishing, etc. complete. Complying with standard specifications.TNDSS NO 28 V, VI(S2) V, VI(S5A) VII

Supplying fabricating and placing in position of TMT steel rods including cost of binding wire, cost of all labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. TNDSS No, 97 V,VI (S6) VII (S6) VII-3

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification TNDSS No. 30 &86

For Square Coloumn

Grade Beam

For Plan Surface

Reinforced Cement Concrete 1:1½:3 Mix (One cement, one and half sand and three aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, labour charges for mixing. Laying and curing, finishing, etc. complete. Complying with standard specifications(TNDSS No.30 V,VI (S3) VII-3

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification

Collection and supply of Well Gravel from approved quarrry and filling the same in layer by layer each layer not exeeding 15mm thick, including cost and conveyance of gravel to site, laboure charges for filling, watering, ramming, etc. Complete as per Standard specification etc. complete.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three Crushed Stone Sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Supplying and Fixing R C C drop RCC drop wall of 50mm thick with cm 1:3 mix, including cost of rein, grill in position at necessary chicken mesh, Shuttering, Laying , Finishing etc., Complete as per std., Specifications.

Finishing the top of roof with Cooling Ceramic Tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Ellis Pattern flooring with 20mm thick in Cement Concrete 1:2:4 Mix using 3 to 10 mm Stone Jelly Chips and top surfaces rended smooth in Cement – 10m2 ( no sand to be used )

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm